Contribute
Register

Mavericks: HDMI Audio - AppleHDA [Guide]

Status
Not open for further replies.
You mean by extracting the kext file out of the installer and then manually install it in S/L/E? Tried this too with no success.
 
:banghead::banghead:

can some one please help i tried following the Haswell HDMI Audio (with dsdt edits) section in the guide
but still have no audio.

GA-Z87M-D3H + i5 4670K + 8GB 1600Mhz DDR3
-audio drivers /Realtek ALC892

attached is my dsdt

View attachment 98554
 
SGA-Z87M-D3H + i5 4670K + 8GB 1600Mhz DDR3
UEFI (HD4000/7 Series) HDMI Audio dsdt guide Used
The guide actually used was HD4600+/8 Series HDMI Audio (dsdt or ssdt) - Desktop
Framebuffer edits required. See Post #1.
What Display is connected to which port?
 
Post #1, 4. UEFI (HD4000/7 Series) HDMI Audio (dsdt or ssdt) - Desktop

Thanks for the reply, toleda. No result((( System preferences/Sound/Output is empty.

View attachment config.plist

View attachment DSDT_Clean Compile.aml

View attachment DSDT_Patched.aml

View attachment iMac - Serj after patchihg DSDT.ioreg

Asrock Z77 Extreme 4 BIOS ver 2.70 http://biosrepo.wordpress.com/asrock/z77/
Intel Pentium G2030 (integrated graphics turne off)
2x2 Gb Kingston
ASUS GTX 560 (non Ti) ENGTX560 DC/2DI/1GD5 plugged to TV via DVI-HDMI
Mavericks 10.9.4
Native AppleHDA.kext

I patched DSDT with this
uefi1-hdmi_audio-1.txt
In system report/Sound i see HDMI output/Display Port but system preferences/sound/output is empty.

Hope you can help me!!:oops:
 
Status
Not open for further replies.
Back
Top