macOS 10.15.6 Supplemental Update

[Silvy]

Updated without problems in probably 10 minutes and a couple of reboots.
I have clover 5107 and I didn’t update any kext.
Audio, Wi-Fi, Bluetooth usb and graphics card are ok.
First boot with new version seems a little slower then usually

 

[clichequiche]

no issues on CaseySJ's OC 0.6.0

 

[NZRichard]

Smooth but slower update from Catalina 10.15.3 all the way in one shot to 10.15.6 + on Z370A build. Upgraded EFI folder using MultiBeast 12.3 and added (attached) SSDT-EC.aml to ACPI/Patched folder

 

[rheneas]

I ran into a problem that I've had once before, but only with Catalina updates.

After downloading the .dmg, I updated Lilu 1.4.6, WhateverGreen 1.4.1, AppleALC 1.5.1, and VirtualSMC 1.1.5 to Kexts\Other.

Using Clover 5120, I twice received the error “The installer is missing resources.” Replaced the new kexts with the previous ones, but received the same error. This morning I booted without clicking the “install Catalina” icon in Clover, and the install competed. Reinstalled current kexts followed by another successful boot. Audio, sleep and USB3 working.

 

[Archangeliques]

25ish mins. 2 reboots and update completed successfully.

 

[jaymonkey]

Yet another quick and easy update on my daily driver laptop and desktop hacks.
Both systems running Clover 5107 and 3rd party kexts from the acidanthera 3rd August point release.

The usual three reboots and about 28 mins to install on both machines.
No issues during and after the update.

Desktop Haswell system :-

HP Spectre X360 Laptop :-

Cheers
Jay

 

[oopsydaisy]

I went from 10.15.5 to 10.15.6 (with supplemental update rolled in). Steps below in case anyone runs into same issues as me.

I tried updating Clover from 5118 to 5120, as well as updating Lilu, VirtualSMC, WEG, and AppleALC. Got weird graphical glitch at boot after upgrade and the OS would not load.

Rolled back my EFI (Clover 5118) from backup and tried updating to 5119, along with aforementioned kexts. No dice.

Rolled back again and this time just updated kexts. Good to go.

Ran OS update and after a couple of reboots (Clover did not select correct partitions), I'm all green.

 

[Wildsparrow]

Smooth update from 10.15.5 (supplemental update) to 10.15.6 (supplemental update).
Clover 5107.
No update to KEXTs or anything else.
No issue afterwards (i.e. sound, WiFi, etc. is working)

3-4 reboots, always went for the update boot disk or the normal boot drive for the last boot (when no update boot disk was available anymore).

 

[t33j4y]

Worked fine on my OptiMac

Upgraded from 10.15.5

 

[mhjeff]

Before the update, I updated Clover to 5021, and installed the latest kexts using Clover Configurator and did a CCC and Time Machine backup.
But just like the last couple of updates, I'm still getting some weirdness at the end of the install where it says it failed to update due to something called a "Bless" tool.

This is what I saw after the second reboot:

Then after I restarted to Clover boot menu, I again selected "Boot from Catalina Install".
And this is what I got:

I then picked my Catalina startup disk and this is what I got next:

Again something about a "Bless" tool. WTF is a "Bless" tool?
Anyway I selected "Shutdown" from the menu bar and manually had to restart my machine.
Once I got to the Clover menu this time I selected "Boot from Mac OS Catalina" (Not install) and booted into Catalina normally. After I was logged in I checked "About This Mac" and sure enough, the update was successful.

Overall the update took about 20 mins, but I'm not sure what Apple has changed to cause this weirdness when updating.