macOS 10.13.6 Update

[canyondust]

I have slogged through the link
One question, is the code inputted one line at a time? I tried and after hitting return Terminal output says "Try Again" (what? does Terminal think it is the Eight Ball telling fortunes
When I try copy/paste of both lines, only the first line pastes. I hope this query makes sense.

I’ve never seen ‘try again’ as a terminal output... I did them one at a time and it was fine. You can also unhide all files I think with the key command shift-command-. and navigate to those paths and delete them manually I think

 

[elfcake]

I’ve never seen ‘try again’ as a terminal output... I did them one at a time and it was fine. You can also unhide all files I think with the key command shift-command-. and navigate to those paths and delete them manually I think

I ended up running one line at a time. So far no exploding Hack. I have yet to restart.

 

[bigmantuck0224]

Updated via App Store with no problems. After install all I had to do was install new Nvidia drivers.

​

 

[Jar-Jar]

Just Updated from 13.4 to 14.6.

Updated lilu.kext, whatevergreen.kext, apfs.efi, and install from combo update 13.6. Just Fine.

 

[Jibooom88]

I've just finished to update via combo update, all went smooth, i've just replace before the update the apfs.efi and Nvdagraphicsfixup.kext and i've started the update, in the end to update i've updated the last version of Nvdia web driver and all went right!!!
Thank tonymac and all good people!!!

 

[bugsb]

Did you update the USB patch by PMHeart to 10.13.6? Bluetooth runs through USB.
<key>KernelAndKextPatches</key>
<dict>
<key>KextsToPatch</key>
<array>
<dict>
<key>Comment</key>
<string>USB 10.13.6+ by PMHeart &amp; FredWst</string>
<key>Find</key>
<data>g32IDw+DpwQAAA==</data>
<key>MatchOS</key>
<string>10.13.6</string>
<key>Name</key>
<string>com.apple.driver.usb.AppleUSBXHCI</string>
<key>Replace</key>
<data>g32ID5CQkJCQkA==</data>
</dict>
</array>
</dict>

same thing here - at this point no custom SSDT yet, but plan to do asap. Removing the & in line 3 following PMHeart acdg. to this hint did NOT solve the issue (neither did toggling between 10.13.x and 10.13.6 as MatchOS string).

I posted my details into the "macOS 10.13.6 lost Bluetooth - BCM4352/20702A3" thread.

 

[WilliamLondon]

Upgraded lilu, shiki, AppleALC, CoreDisplayFixup, IntelGraphicsFixup kexts to latest versions (rebooted), then upgraded Clover to latest (copied .efi file over from backup of EFI folder) & rebooted, then finally upgraded from 10.13.5 to 10.13.6 via MAS.

Upgrade went well until I discovered dual monitor support no longer worked via my HD630.

Fiddled around for a day or so with cables, adapters, connections and SMBIOS settings in config.plist. Previously it was working with 17,1 (after 18,1 & 18,3 both went belly up recently) but this time I switched to 14,2 and removed the DP->HDMI adapter I was using previously to get 2 monitors working, et voilà, now both monitors work as they should, yay!!

No adapters required any longer, I'm getting full 4K on the DP connection & 60 Hertz on my 1080p monitor.

 

[sisko612]

Updated via App Store. Updated NVIDIA drivers and applied new USB port limit patch via Clover Configurator. No problems.

 

[Tom012]

Where do I have to point the Installer to. "High Sierra" or "macOS Install"?

 

[elfcake]

Guys, I found the solution for strange fonts.

OS X thinks my monitor is a TV, and is using the YCbCr colour space rather than RGB. It happened with my RX560.

Follow this instruction for RGB.

To disable SIP:

1. Open config.plist in Clover Configurator
2. Navigate RT Variables > CsrActivateConfig
3. Change CsrActivateConfig to appropriate value
   1. Disable SIP: 0x67
   2. Enable SIP: 0x00
4. Reboot Hackintosh to apply changes

Ok! Decided to do the update again on a quiet Sunday morning. Used your link, and NO MORE Pink!!! Thank you so much. Weird thing is the SIP has been disabled all along. Go figure.