macOS 10.12.5 Update

[ReikJiang]

What I should do to install a new Hackintosh with 6700K and HD530. It seems that 10.12.5 had update HD530 driver.
The installation guide is working well for 10.12.5 now?

 

[malvarez]

Has anyone done the update with a Samsung 960 pro (or any other nvme drive) as the boot drive?

 

[RehabMan]

Has anyone done the update with a Samsung 960 pro (or any other nvme drive) as the boot drive?

Make sure you did the class-code spoof...
https://www.tonymacx86.com/threads/...h-ionvmefamily-using-class-code-spoof.210316/

 

[Stork]

Has anyone done the update with a Samsung 960 pro (or any other nvme drive) as the boot drive?

Make sure you did the class-code spoof...
https://www.tonymacx86.com/threads/...h-ionvmefamily-using-class-code-spoof.210316/

I successfully updated to 10.12.5 on my Gene build which uses a Samsung 950 Pro M.2 NVMe SSD. I'm using the spoof SSDT as described in RehabMan's guide.

Here's my 5 step procedure for my Gene update.

 

[malvarez]

I successfully updated to 10.12.5 on my Gene build which uses a Samsung 950 Pro M.2 NVMe SSD. I'm using the spoof SSDT as described in RehabMan's guide.

Here's my 5 step procedure for my Gene update.

Thanks Stork and Rehabman, I will give it a shot.

 

[jimbo91]

Use clover boot menu and go to options and add -v to boot arg. Post a screenshot.

ok I will try it

 

[axh0]

Many Thanks el_charlie! That was the fix. You saved my butt!

I glanced over the recommend install of "NvidiaGraphicsFixup with Lilu in Clover/Kexts/Other" thinking it was more for newer motherboards and graphic cards. Didn't think it applied to my four year old plus setup using iMac 12.2 definition

Here's the info on installing "NvidiaGraphicsFixup with Lilu in Clover/Kexts/Other"" https://www.tonymacx86.com/threads/...-imac-15-or-imac-17-system-definition.183113/

Thanks again el_charlie and tonymac86 site!

Updated via AppStore. Forgot to update Clover.
System boots, but I have black screen after. Managed to connect through VNC, it runs as it did before, except lower resolution and not showing anything on a monitor.
Updated Clover, no success.
Updated CUDA, no success.
Tried NVIDIA Alternate drivers, no success.
Tried NvidiaGraphicsFixup, no success.

Any ideas? I guess I'll backup from Time Machine for now.

 

[stexine]

Given:
- have skylake 6700k, intel 530hd, gigabyte GA-Z170X-UD3, no extra graphics
- updated from 10.12.4 (graphics worked out-of-the-box) to 10.12.5
- put Lilu.kext & IntelGraphicsFixup.kext into /Library/Extensions

Had graphics troubles (glitches & 7mb reported in "about this mac")

Somehow magically managed to boot normally after disabling all AppleIntelSKLGraphicsFramebuffer and multiple boots with ig-platform-id=0x12345678 many times boot just hanged. Strange.

My config.plist: https://gist.github.com/razum2um/19d742664ca30df4ab846caeb0a8a7aa

I have a 7700k with HD 630 and I have the same problem with glitches & 7mb reported in "about this mac". Tried to disable AppleIntelSKLGraphicsFramebuffer and platform-id=0x12345678, successfully boot but still has the problems. Have you fixed it?

 

[citizen7]

z170-UD5-TH / GTX 980TI
SuperDuper backup
Updated Clover first with latest MultiMeast
Downloaded web driver 378.05.05.15f01
Updated via App Store

Smooth - no issues at all

Updated web GFX, & "sudo trimforce enable"
Reboot
Update CUDA, reboot
Audio fine, network fine, everything great so far
SuperDuper back up again

Thanks Stork, RehabMan, tony and all the others who work so hard on this!!

Haven't tested Thunderbolt, still no devices... can't tell what's up there yet

 

[DrTom]

Is Haswell HD4600 Graphics working?

It's working just fine on my vanilla Economac II build and did so through all the 10.12.5 public betas.