Intel HD530 - restart loop

[googee]

Hello,

I successfully install High Sierra on my GL502VT laptop by seting ig-platform-id to 0x12345678.

However, I can not get Intel HD530 to work.

The screen is glitching on login and I can see only 10 MB on graphic card ram.

The screen is fussy when trying to switch Safari tab etc.

I searched and tried various ways on this forum and other places but still have no success.

Attached is my HDD EFI content.

Any guidance would be much appreciated.

 

[Feartech]

Hello,

I successfully install High Sierra on my GL502VT laptop by seting ig-platform-id to 0x12345678.

However, I can not get Intel HD530 to work.

The screen is glitching on login and I can see only 31 MB on graphic card ram.

The screen is fussy when trying to switch Safari tab etc.

I searched and tried various ways on this forum and other places but still have no success.

Attached is my HDD EFI content.

Any guidance would be much appreciated.

MacBookPro13,1 would be a better choice

Use this tool and upload your problem reporting files:

[TOOL] [Generate Proper Problem Reporting Files]

Last update: 04 Mar 2018 Current Version: 4.2 Hello guys, I have seen many instances where people start a thread with the problem they are facing on their hack. They try to describe the issue in their own way that most of the times, is not able to properly describe what's going wrong with...

www.tonymacx86.com

 

[googee]

Hello Feartech,

I had to revert to a working version of EFI in order to dump the system information.

So the CLOVER folder is a bit difference from the one I attached in previous post.

Please check attached files.

 

[Feartech]

Hello Feartech,

I had to revert to a working version of EFI in order to dump the system information.

So the CLOVER folder is a bit difference from the one I attached in previous post.

Please check attached files.

MacBookPro11,2 is still wrong

kexts belong in /Library/Extensions and not /System/Library/Extensions

and all your kexts should be installed to /L/E

 

[googee]

Hello Feartech,

1. I will change to MacBookPro13,1

2. Do you mean I have to delete all kexts from /System/Library/Extensions and install in /Library/Extensions instead?

3. What about kexts in EFI/CLOVER/kexts?

4. Are the settings in config.plist correct?

 

[Feartech]

Hello Feartech,

1. I will change to MacBookPro13,1

2. Do you mean I have to delete all kexts from /System/Library/Extensions and install in /Library/Extensions instead?

3. What about kexts in EFI/CLOVER/kexts?

4. Are the settings in config.plist correct?

1: good
2: only delete the kexts you installed there
3: keep only essential kexts in clover/kexts/other
4: looks ok but you will need to enable these:

<key>Fixes</key>
            <dict>
                <key>Comment-IRQ Fix</key>
                <string>The following fixes may be needed for onboard audio/USB/etc</string>
                <key>FixHPET</key>
                <false/>
                <key>FixIPIC</key>
                <false/>
                <key>FixRTC</key>
                <false/>
                <key>FixTMR</key>
                <false/>
            </dict>

<key>PciRoot(0)/Pci(0x1f,3)</key>
            <dict>
                <key>#hda-gfx</key>
                <string>onboard-1</string>
                <key>#layout-id</key>
                <integer>3</integer>
                <key>#no-controller-patch</key>
                <integer>1</integer>
            </dict>

 

[googee]

Hello Feartech,

I still stuck in the reboot loop.

I did the following:

1. Changed to MacBookPro13,1

2. Cleaned /System/Library/Extensions of my installation and install my kexts into /Library/Extensions

3. Made changes to config.plist as you will see in attached problem report files.

Any guidance please.

 

[Feartech]

Hello Feartech,

I still stuck in the reboot loop.

I did the following:

1. Changed to MacBookPro13,1

2. Cleaned /System/Library/Extensions of my installation and install my kexts into /Library/Extensions

3. Made changes to config.plist as you will see in attached problem report files.

Any guidance please.

way too many files in drivers64UEFI folder

[Guide] Booting the OS X installer on LAPTOPS with Clover

Overview One of the first challenges you'll face in installing OS X to your laptop will involve getting the OS X installer to boot from USB. This guide is for those wishing to use Clover (and in fact the only bootloader supported here). Both installing using Clover UEFI and Clover legacy are...

www.tonymacx86.com

use config.plist from the laptop untouched

 

[googee]

Thank you for your feedback.

Regarding files in drivers64UEFI folder can you tell me what files are needed?

 

[Feartech]

Thank you for your feedback.

Regarding files in drivers64UEFI folder can you tell me what files are needed?

the laptop guide link mentions what should be in there