Contribute
Register

Solved > Install stuck at apple logo with progress bar at 100%

CaseySJ

Moderator
Joined
Nov 11, 2018
Messages
3,134
Motherboard
Gigabyte Designare Z390
CPU
i7-9700K
Graphics
RX 580
Mac
MacBook Air, Mac Pro
Classic Mac
Quadra
Mobile Phone
iOS
  1. The BIOS settings in STEP 3 of the standard guide should also be applied.
  2. You've applied the ACPI Patch in config.plist, but have you also tried the Legacy RTC setting from screenshot #2 here?
 
Joined
Apr 16, 2019
Messages
9
Motherboard
Asus TUF Z390-PRO Gaming
CPU
i7-9700K
Graphics
RX 590
  1. The BIOS settings in STEP 3 of the standard guide should also be applied.
  2. You've applied the ACPI Patch in config.plist, but have you also tried the Legacy RTC setting from screenshot #2 here?
1. In his build Macman seem to say he hadn't change anything else than what he wrote on the first post (https://www.tonymacx86.com/threads/macmans-build-asus-tuf-z390-pro-gaming-i9-9900k-uhd-630.275272/page-4#post-1949496)

2. There is no legacy RTC option in my BIOS (2411 version)
 

CaseySJ

Moderator
Joined
Nov 11, 2018
Messages
3,134
Motherboard
Gigabyte Designare Z390
CPU
i7-9700K
Graphics
RX 580
Mac
MacBook Air, Mac Pro
Classic Mac
Quadra
Mobile Phone
iOS

CaseySJ

Moderator
Joined
Nov 11, 2018
Messages
3,134
Motherboard
Gigabyte Designare Z390
CPU
i7-9700K
Graphics
RX 580
Mac
MacBook Air, Mac Pro
Classic Mac
Quadra
Mobile Phone
iOS
Joined
Apr 16, 2019
Messages
9
Motherboard
Asus TUF Z390-PRO Gaming
CPU
i7-9700K
Graphics
RX 590
It's still advisable to set those BIOS parameters, per STEP 3 of the standard guide.
Thank you for your suggestion. It worked, and I managed to install Movaje, ran multibeast and took the usb stick off before rebooting.

In multibeast I picked the exact same settings as the Macman build which are :
Quick Start > UEFI Boot Mode
Drivers > Audio > AppleALC
Drivers > Disk > Intel Generic AHCI SATA
Drivers > Misc > FakeSMC
Drivers > Network > Intel > IntelMausiEthernet v2.4.0
Drivers > USB > Remove XHCI USB port Limit
Bootloaders > Clover UEFI Boot Mode + Emulated NVRAM
Customer > Graphics > Core Graphics Fixup AKA Whatevergreen
Customer > Graphics > Intel HD630 (Coffee Lake)
Customer > System Definitions > iMac > iMac18,1

I restarted the system and, after the restart, clover launched and I choose to boot from my fresh installed mojave. The apple logo appears, then the progress bar. But the progress bar stops at around 80%.

If I am booting from the usb stick it boots with no problem, but as soon as I am trying to stras without the usb in I am stuck.


Any ideas on what could be the issue ?

Attached the verbose screenshot
 

Attachments

Last edited:
Joined
Apr 16, 2019
Messages
9
Motherboard
Asus TUF Z390-PRO Gaming
CPU
i7-9700K
Graphics
RX 590
Okay found the solution

The instal had remove the ACPI patch from the config.plist

I have just put the patch back and everything works


thank you so much to everybody for your help !!
 

CaseySJ

Moderator
Joined
Nov 11, 2018
Messages
3,134
Motherboard
Gigabyte Designare Z390
CPU
i7-9700K
Graphics
RX 580
Mac
MacBook Air, Mac Pro
Classic Mac
Quadra
Mobile Phone
iOS
Okay found the solution

The instal had remove the ACPI patch from the config.plist

I have just put the patch back and everything works


thank you so much to everybody for your help !!
Congratulations!!
 
Joined
Mar 30, 2019
Messages
17
Motherboard
Z370 AORUS Gaming 7
CPU
i9-9900K
Graphics
UHD 630 + Vega 56
Mac
Mac Pro
Mobile Phone
Android
Amazing what few "unimportant" details can do :clap:
No it's not sarcasm but the truth. Little things that may seem insignificant can eventually lead to a solution.

Congratz!
 
Top