Contribute
Register

<< Solved >> Install stuck at apple logo with progress bar at 100%

Status
Not open for further replies.
  1. The BIOS settings in STEP 3 of the standard guide should also be applied.
  2. You've applied the ACPI Patch in config.plist, but have you also tried the Legacy RTC setting from screenshot #2 here?
 
1. In his build Macman seem to say he hadn't change anything else than what he wrote on the first post (https://www.tonymacx86.com/threads/...g-i9-9900k-uhd-630.275272/page-4#post-1949496)

2. There is no legacy RTC option in my BIOS (2411 version)
Are you using one of the USB 2 ports from the motherboard header as mentioned in MacMan's build guide:

Screen Shot 2019-05-10 at 10.45.40 AM.png
 
It's still advisable to set those BIOS parameters, per STEP 3 of the standard guide.
Thank you for your suggestion. It worked, and I managed to install Movaje, ran multibeast and took the usb stick off before rebooting.

In multibeast I picked the exact same settings as the Macman build which are :
Quick Start > UEFI Boot Mode
Drivers > Audio > AppleALC
Drivers > Disk > Intel Generic AHCI SATA
Drivers > Misc > FakeSMC
Drivers > Network > Intel > IntelMausiEthernet v2.4.0
Drivers > USB > Remove XHCI USB port Limit
Bootloaders > Clover UEFI Boot Mode + Emulated NVRAM
Customer > Graphics > Core Graphics Fixup AKA Whatevergreen
Customer > Graphics > Intel HD630 (Coffee Lake)
Customer > System Definitions > iMac > iMac18,1

I restarted the system and, after the restart, clover launched and I choose to boot from my fresh installed mojave. The apple logo appears, then the progress bar. But the progress bar stops at around 80%.

If I am booting from the usb stick it boots with no problem, but as soon as I am trying to stras without the usb in I am stuck.


Any ideas on what could be the issue ?

Attached the verbose screenshot
 

Attachments

  • photo_2019-05-11 09.36.13.jpeg
    photo_2019-05-11 09.36.13.jpeg
    328.7 KB · Views: 86
  • photo_2019-05-11 09.36.09.jpeg
    photo_2019-05-11 09.36.09.jpeg
    326.3 KB · Views: 96
Last edited:
Okay found the solution

The instal had remove the ACPI patch from the config.plist

I have just put the patch back and everything works


thank you so much to everybody for your help !!
 
Okay found the solution

The instal had remove the ACPI patch from the config.plist

I have just put the patch back and everything works


thank you so much to everybody for your help !!
Congratulations!!
 
Amazing what few "unimportant" details can do :clap:
No it's not sarcasm but the truth. Little things that may seem insignificant can eventually lead to a solution.

Congratz!
 
Status
Not open for further replies.
Back
Top