- Joined
- Jan 19, 2019
- Messages
- 18
- Motherboard
- GA-Z370N-WIFI
- CPU
- i7-8700K
- Graphics
- UHD 630
- Mac
- Mobile Phone
Hi Everyone,
I've been working on this Hackintosh for a while and have tried various things but seem to come to this error almost every time. I'm totally at a loss of what to do and what else to try. It's almost like I'm missing a Kext or something?
Backtrace/Kernel Extension errors i'm getting are:
Internal graphic Enabled
Memory settings to 128 MB (instead of 64MB)
Installation methodology:
KEXT tried to use:
Config.plist changes:
I've been working on this Hackintosh for a while and have tried various things but seem to come to this error almost every time. I'm totally at a loss of what to do and what else to try. It's almost like I'm missing a Kext or something?
Backtrace/Kernel Extension errors i'm getting are:
- com.apple.driver.DiskImage.KernelBacked
- Dependency: com.apple.driver.DiskImages
- Dependency: com.apple.iokit.IOStorageFamily
- com.appledriver.DiskImages.UDIFDiskImage
- Dependency: com.apple.driver.DiskImages.KernelBackend
- Dependency: com.apple.driver.DiskImages
- Dependency: com.apple.iokit.IOStorageFamily
- CPU: i7-8700k
- Motherboard: GA-Z370N-WIFI
- RAM: G.Skillz Trident Z 32GB DDR4-3000 (2x16GB)
- GPU: Integrated UHD630
- Harddrive: Samsung 860 EVO
- Bios: Revision F5
- MacOS version: 10.14.3 (Mojave)
- Save & Exit → Load Optimized Defaults
- M.I.T. → Advanced Memory Settings Extreme Memory Profile(X.M.P.) : Profile1 (Tried disabling didn't work either)
- BIOS → Fast Boot : Disabled
- BIOS → LAN PXE Boot Option ROM : Disabled
- BIOS → Storage Boot Option Control : UEFI
- Peripherals → Trusted Computing → Security Device Support : Disabled
- Peripherals → Network Stack Configuration → Network Stack : Disabled
- Peripherals → USB Configuration → Legacy USB Support : Auto
- Peripherals → USB Configuration → XHCI Hand-off : Enabled
- Chipset → Vt-d : Disabled
- Chipset → Wake on LAN Enable : Disabled
- Chipset → IOAPIC 24-119 Entries : Enabled
Internal graphic Enabled
Memory settings to 128 MB (instead of 64MB)
Installation methodology:
- Unibeast 9.0.0 - didn't work
- Unibeast 9.1.0 - didn't work
- Vanilla method and used clover v4871 - didn't work
Success: Coffee Lake i7-8700K - GA-Z370N-WIFI
In my case 18,2 and 18,3 didn't work well, only 18.1 worked. I tested the performance differences and stayed with the current 17.1. Now I updated CPU to i5-9600K CPU @ 3.70GHz and changed too to MacMini 8,1 and all ok. You just need to install in /L/E only, make sure these kexts are not in...
www.tonymacx86.com
KEXT tried to use:
- FakeSMC/VirtualSMC - same error
Config.plist changes:
- ACPI -> Fixes > FixShutdown
- find: 83FB0F0F 838F0400 00
replace: 83FB0F90 90909090 90
- Booting windows 7
- Worked when booting a live USB, but seems like the USB 3.0 ports don't work for the keyboard.
- Got to the install screen but then again, keyboard didn't work.
- Installing onto SSD drive and plugging into SATA port
- Same error in the image
Attachments
Last edited: