I can't boot on usb key

[gosss]

Hi everyone,

i newone here.

i just would to install el capitan with new ssd and my actual config and i can't boot on the usb , the usb key lighting during 3sec and nothing after.

i set sata AHCI, disable vt-d,

i use a ps2 keyboard , it's not a problem? it's works so...

i tried many usb2 port at my back of cooler master.

can you tell me the exact bios feature to do?

here is my actual mother board: http://www.materiel.net/carte-mere-socket-1366/asus-p6x58d-e-57429.html#

have you an idea?

thanks a lot

 

[kiiroaka]

Perhaps UniBeast did not correctly install MultiBeast on the USB stick. The USB blinking light is trying to read the USB stick but it can't load it. Or you enable UEFI on your motherboard but selected to boot into the non-UEFI USB boot selection. When you hit your Boot select key, F8, Fp, F10, F11, etc.) select the UEFI-xxx USB to boot from.

I would try creating a different USB stick with UniBeast.