jaymonkey
Moderator
- Joined
- Aug 27, 2011
- Messages
- 4,080
- Motherboard
- GB Z490 Vision D
- CPU
- i9-10850K OC @ 5.2 GHz
- Graphics
- RX6800-XT+UHD630
- Mac
- Mobile Phone
Hi, I just updated to most recent version of I2C and it now seems to require three fingers to scroll on touchscreen. Is this something that can be changed?
@ShortFormErnie,
Good news .... the three finger scroll issue with the touch screen has been identified as a logic issue by Git User "blankmark" and the fix is implemented in his fork of VoodooIC2 :-
GitHub - blankmac/VoodooI2C: Intel I2C controller and slave device drivers for macOS
Intel I2C controller and slave device drivers for macOS - blankmac/VoodooI2C
github.com
I've tried it myself and it works great .... if you want to try for yourself you will have to clone his repo from the command line as downloading the project as a zip in a browser does not download all the dependencies (i made that mistake). You should follow Alex's documentation if you want to give it a go yourself using Xcode (no complied binary available yet):-
Documentation
voodooi2c.github.io
But use this command to clone blackmark's fork rather than Alex's :-
Code:
git clone --recursive https://github.com/blankmac/VoodooI2C
As detailed in Alex's document you will need to ensure you have cpplint installed but you can skip installing cldoc as long as you remove the documentation phase from the build phase in xcode (its the last one) ... i had a lot of trouble trying to get cldoc installed but Alex told me it's not required for a local build.
I'm sure it wont be too long before Alex merges blankmac's fix into his master build and releases an update.
Cheers
Jay
Last edited: