HP Probook 470 G1 (Haswell) & MacOS Ventura 13.1 works (somewhat)

[vdkam]

Hardare : HP Probook 470 G1
CPU : I3
Ram : 8GB
HDD: 256GB SSD
Graphics: Intel HD 4600 ( Hashwell )
OpenCore 0.88
OPCL: 0.53

successfully installed

 

[UtterDisbelief]

Hardare : HP Probook 470 G1
CPU : I3
Ram : 8GB
HDD: 256GB SSD
Graphics: Intel HD 4600 ( Hashwell )
OpenCore 0.88
OPCL: 0.53

successfully installed

Hi there.

Well done on your installation.

As this is a "support" forum, why not let people know how you overcame any potential problems or explain your build?

 

[vdkam]

I'm trying to write a short guide,
since I'm and try it out until it suddenly installs Ventura on HP Hashwell laptop-

1.you must first use a working Monterey with OpenCore 0.87 / 0.88,
2.Create and install new USB installation for Ventura
3. after installation use OPCL 0.53 to patch the graphic
since after installation, the graphic has only 3 MB.
( after going through the patch, the laptop unfortunately freezes.
Simply turn it off and turn it on again.

 

[trs96]

iMacPro1,1 SMBIOS for a laptop ? Why ?

 

[vdkam]

I still have several problems that I can't get any further.

1. I can't take another symbiosis yet, because then it won't boot.
2. Bluetooth not running
3. Firefox not working ( Opera,Crome ok )
4. What app not wrking

maybe someone can fix the bugs, for that I thank you very much for further help

 

[Feartech]

I still have several problems that I can't get any further.

1. I can't take another symbiosis yet, because then it won't boot.
2. Bluetooth not running
3. Firefox not working ( Opera,Crome ok )
4. What app not wrking

maybe someone can fix the bugs, for that I thank you very much for further help

you should be using a laptop smbios

 

[trs96]

2. Bluetooth not running
3. Firefox not working ( Opera,Chrome ok )
4. What app not working

Everyone that patches HD4600 graphics to "work" with Ventura reports similar problems.
Certain apps just won't work. No known solution either. If you can live with those problems
that's fine. I wouldn't want to run Ventura on HD4600 and not have Firefox working. Deal breaker 4me.

maybe someone can fix the bugs

These problems are not bugs. When you use a macOS version with no iGPU support (Ventura with HD4600) these problems are due to incompatible hardware and software. They're not software bugs.

 

[Feartech]

I still have several problems that I can't get any further.

1. I can't take another symbiosis yet, because then it won't boot.
2. Bluetooth not running
3. Firefox not working ( Opera,Crome ok )
4. What app not wrking

maybe someone can fix the bugs, for that I thank you very much for further help

also your info.plist in your USBPorts.kext should match your main config.plist in terms of smbios, USBPorts.kext says MacBookPro11,1

config.plist says iMacPro1,1

with Ventura, the requirement is MacBookPro14,1 which is a Kabylake

you would be better off using a previous version of macOS that is supported with your hardware

 

[trs96]

better off using a previous version of macOS that is supported with your hardware

Unless a laptop has at least Kaby Lake iGPU (HD630) or spoofed HD530 to HD630, it's a bad idea to try Ventura. Laptops are completely iGPU dependent for graphics. Without graphics acceleration it's not a good experience. Not usable.

 

[HardSoftMac]

you would be better off using a previous version of macOS that is supported with your hardware

Please which of the previous but recent macOS would you advice for my laptop using OC? Thanks.