How to enable 'Kaby Lake' Intel 6xx Graphics (10.12.6+)

[ponty]

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the tool mentioned in the FAQ, that way it is less likely you'll omit something.

Nothing changed since my previous post. What are you expecting to see?

 

[RehabMan]

Nothing changed since my previous post. What are you expecting to see?

Post #324 files are incomplete.

 

[ponty]

Post #324 files are incomplete.

Here are all of the "Problem Reporting" files.

Also attached, you can see the monitor connected by DVI to the IGPU with a mouse cursor that I can move around on the black screen, my "left" monitor, and between the other screens as normal. The middle monitor is shown on the right, connected to my Nvidia 980Ti. The right monitor (not shown) is also connected the Nvidia. The NV screens work perfectly so far.

Thanks again for your help!
Ponty

 

[RehabMan]

Here are all of the "Problem Reporting" files.

Also attached, you can see the monitor connected by DVI to the IGPU with a mouse cursor that I can move around on the black screen, my "left" monitor, and between the other screens as normal. The middle monitor is shown on the right, connected to my Nvidia 980Ti. The right monitor (not shown) is also connected the Nvidia. The NV screens work perfectly so far.

Thanks again for your help!
Ponty

EFI not requested (it is too large). Request was for EFI/Clover without themes.
And please use the gen_debug.sh tool.

 

[ponty]

EFI not requested (it is too large). Request was for EFI/Clover without themes.
And please use the gen_debug.sh tool.

The themes were removed but I was sending the whole EFI directory. I generated the debug files with the gen_debug.sh tool as requested. No need to resend the EFI/CLOVER as I see it gets included in this archive.

Thanks.
Ponty

 

[RehabMan]

The themes were removed but I was sending the whole EFI directory. I generated the debug files with the gen_debug.sh tool as requested. No need to resend the EFI/CLOVER as I see it gets included in this archive.

Thanks.
Ponty

This setup looks ok to me (monitor is detected with valid EDID in ioreg).
Maybe it is SMBIOS limited?

Note: Since you have FakeSMC.kext installed, you should set config.plist/SystemParameters/InjectKexts=Detect
Note 2: CsrActiveConfig should be 0x67.

 

[mrananyan]

I have some problems with Sky Lake graphics. It detected and boot but works very bad with 7mb vram. I found posts that my cpu and gpu officially supported in mac 10.12.6+ but in my 10.13.2 it's not work.

installed kext's list

1. Lilu.kext
   
2. IntelGraphicsFixup.kext
   
3. Shiki.kext
   
4. FakePCIID.kext
   
5. FakePCIID_Intel_HD_Graphics.kext

With and without this kext's no difference.

UPD
kextstat show that FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext not loaded

Please help me:/

P.S.
g-platform-id works only with 0x19120000 and 0x16120000

 

[RehabMan]

I have some problems with Sky Lake graphics. It detected and boot but works very bad with 7mb vram. I found posts that my cpu and gpu officially supported in mac 10.12.6+ but in my 10.13.2 it's not work.

installed kext's list

1. Lilu.kext
   
2. IntelGraphicsFixup.kext
   
3. Shiki.kext
   
4. FakePCIID.kext
   
5. FakePCIID_Intel_HD_Graphics.kext

With and without this kext's no difference.

UPD
kextstat show that FakePCIID.kext and FakePCIID_Intel_HD_Graphics.kext not loaded

Please help me:/

P.S.
g-platform-id works only with 0x19120000 and 0x16120000

You have FakeID/IntelGFX=0x59128086 (which is correct), but ig-platform-id 0x19120000.
It is not valid to use an ig-platform-id for Skylake with KabyLake device-id.
You should use a KabyLake ig-platform-id, such as 0x59120000.

 

[mrananyan]

You have FakeID/IntelGFX=0x59128086 (which is correct), but ig-platform-id 0x19120000.
It is not valid to use an ig-platform-id for Skylake with KabyLake device-id.
You should use a KabyLake ig-platform-id, such as 0x59120000.

With it Mac turn off gpu. After 60/70% booting in screen I just see "no signsl"

 

[RehabMan]

With it Mac turn off gpu. After 60/70% booting in screen I just see "no signsl"

You will need to provide some details.
What kind of monitor?
What is the connecting cable?
Did you set DVMT-prealloc correctly in BIOS.
Your profile doesn't even have any hardware details. Please fix.