I'm having trouble just getting the aml file to open in MaciASL can't seem to get it open to even try to 'understand'. Should this be easy to open? It was on my last build.
Name* Find*[Hex] Replace* [Hex] Comment
AppleUSBXHCIPCI 837d8c10 837d8c19 10.13.3 USB Port Limit Patch
Name* Find*[Hex] Replace* [Hex] Comment
AppleUSBXHCI 837d940f 0f839704 0000 837d941a 90909090 9090 10.13.4 USB Port Limit Patch
thank you for share,my dear friend,i want to try install 10.13.14 tryYet another Guide Update - Implementation of 10.13.4 Public Beta 2 (17E150f)
View attachment 311679
Note, that the USB port Limit Patch in the config.plist for 10.13.3 (17D2047)
Code:Name* Find*[Hex] Replace* [Hex] Comment AppleUSBXHCIPCI 837d8c10 837d8c19 10.13.3 USB Port Limit Patch
must be updated for 10.13.4 Beta 2 (17E150f) to:
Code:Name* Find*[Hex] Replace* [Hex] Comment AppleUSBXHCI 837d940f 0f839704 0000 837d941a 90909090 9090 10.13.4 USB Port Limit Patch
under "KextsToPatch" in Section "Kernel and Kext Patches" of Clover Configurator, as else not all available XHC USB ports will be natively implemented.
Like always many thanks to @PMheart from InsanelyMac for providing the respective XHC USB port limit patches.
For further details see Section E.4) - USB Configuration
You can update your iMac Pro macOS High Sierra 10.13.3 (17D2047) build to macOS High Sierra 10.13.4 Public Beta 2 (17E150f) directly via the Appstore after successfully registration for Apple's Public Beta Program. However, it is rather recommended to clone your 10.13.3 (17D2047) System Disk with Carbon Copy Cloner (CCC) to a test drive and to update to 10.13.4 Public Beta 2 (17E150f) on the latter.
Enjoy and have fun
View attachment 311680
hi.my dear friend I find two bug for 10.13.4 Beta (17E150f),when I installed 10.13.4 Beta (17E150f),OS can boot without whatever green.kext,and the GPU can be identify for like thisYet another Guide Update - Implementation of 10.13.4 Public Beta 2 (17E150f)
View attachment 311679
Note, that the USB port Limit Patch in the config.plist for 10.13.3 (17D2047)
Code:Name* Find*[Hex] Replace* [Hex] Comment AppleUSBXHCIPCI 837d8c10 837d8c19 10.13.3 USB Port Limit Patch
must be updated for 10.13.4 Beta 2 (17E150f) to:
Code:Name* Find*[Hex] Replace* [Hex] Comment AppleUSBXHCI 837d940f 0f839704 0000 837d941a 90909090 9090 10.13.4 USB Port Limit Patch
under "KextsToPatch" in Section "Kernel and Kext Patches" of Clover Configurator, as else not all available XHC USB ports will be natively implemented.
Like always many thanks to @PMheart from InsanelyMac for providing the respective XHC USB port limit patches.
For further details see Section E.4) - USB Configuration
You can update your iMac Pro macOS High Sierra 10.13.3 (17D2047) build to macOS High Sierra 10.13.4 Public Beta 2 (17E150f) directly via the Appstore after successfully registration for Apple's Public Beta Program. However, it is rather recommended to clone your 10.13.3 (17D2047) System Disk with Carbon Copy Cloner (CCC) to a test drive and to update to 10.13.4 Public Beta 2 (17E150f) on the latter.
Enjoy and have fun
View attachment 311680
hi.my dear friend I find two bug for 10.13.4 Beta (17E150f),when I installed 10.13.4 Beta (17E150f),OS can boot without whatever green.kext,and the GPU can be identify for like this
View attachment 311787
and the GPU HADU was lost·····
View attachment 311788
last problem is the DP port can not output signal,it must used HDMI port~~~
thats all my found~~~
Enjoy and have fun
ffltt
Running into a non-critical issue but one I'd like to fix.
During boot up and shut done (verbose) I see the following line printed around 50-100 times in separate blocks:
"AppleUSB20HubPort@14740000: AppleUSBHostPort : : disconnect : persistent enumeration failures"
I have noted that my CPU idle is much rougher and slightly hotter than before. USB seems to be working well with a external SSD clocking in at 425MB/s r/w.
This error line started after a failed attempt at installing the rolled back Nvidia driver using the instructions in E.2 of the OP. I have since fixed the Nvidia driver issue.
Thanks in advance for any pointers.
Are your referring to 10.13.3 (17D2047)? Do use the appropriate USB port limit patch?