- Joined
- Jan 30, 2012
- Messages
- 62
- Motherboard
- Z68-uD4
- CPU
- i7 2600k
- Graphics
- EVGA GTX 580
- Mac
- Classic Mac
- Mobile Phone
ok these are my specs:
OS: Lion 10.7.4
Processor: i5 2500K 3.33GHz
Mother Board: Gigabyte GA-Z68XP-UD4
Hard Drive: 60GB OCZ agility 3
Ram: CORSAIR Vengeance 16GB
Usb Dongle: Jarba A320s
WiFi adapter: "Real" Airport Card
Power Supply: CORSAIR Builder CX600 V2
Drive: Sony Optiarc 24X DVD Burner
Graphics Card: AMD Radeon HD 6670
I built this a couple months ago and have had no issues that I couldn't figure out from just readin the boards. but this issue has me stuck for a few days now. I needed more space on my boot disk so I upgraded to a 128GB OCZ Vertex 4 SSD I used carbon Copy Cloner to clone the 60GB onto the 128GB then I ran Mulitibeast for the Bootloader and DSDT files. it boots fine with no issues but the Read/Write speeds aren't as fast as 60GB SSD. I'm using the same 6/gbs cord and its plugged into a sata 3 port same as the 60GB but look at the difference in speeds. Any help or ideas to try to get my new SSD back up to the 400 MB/s speeds again would be much appreciated.
Orignal 60GB OCZ agility 3 (6 gigabit cord/Sata 3 Port)
New 128GB OC Vertex 4 (6 gigabit cord/Sata 3 Port)
OS: Lion 10.7.4
Processor: i5 2500K 3.33GHz
Mother Board: Gigabyte GA-Z68XP-UD4
Hard Drive: 60GB OCZ agility 3
Ram: CORSAIR Vengeance 16GB
Usb Dongle: Jarba A320s
WiFi adapter: "Real" Airport Card
Power Supply: CORSAIR Builder CX600 V2
Drive: Sony Optiarc 24X DVD Burner
Graphics Card: AMD Radeon HD 6670
I built this a couple months ago and have had no issues that I couldn't figure out from just readin the boards. but this issue has me stuck for a few days now. I needed more space on my boot disk so I upgraded to a 128GB OCZ Vertex 4 SSD I used carbon Copy Cloner to clone the 60GB onto the 128GB then I ran Mulitibeast for the Bootloader and DSDT files. it boots fine with no issues but the Read/Write speeds aren't as fast as 60GB SSD. I'm using the same 6/gbs cord and its plugged into a sata 3 port same as the 60GB but look at the difference in speeds. Any help or ideas to try to get my new SSD back up to the 400 MB/s speeds again would be much appreciated.
Orignal 60GB OCZ agility 3 (6 gigabit cord/Sata 3 Port)
New 128GB OC Vertex 4 (6 gigabit cord/Sata 3 Port)