Contribute
Register

HELP NEEDED: HP Probook 430 G2 Broadwell

Status
Not open for further replies.
RehabMan said:
Did you implement backlight control?
Click to expand...

I only used ProBook Installer. :|

Is your laptop Intel graphics only, or does it have dual-GPU?
Click to expand...

Intel only

Do you have UEFI hybrid or UEFI only?
Click to expand...

UEFI hybrid
When i try switch to UEFI only i boot to Windows directly
don't know why :(

Did you set DVMT-prealloc to 64MB?
Click to expand...

As i wrote i'm only set in BIOS Memory to 64MB
In Windows i got Dedicated Video Memory = 64MB
So DVMT-prealloc must be 96MB as i understand

Are your graphics kexts vanilla?
Click to expand...

Yes, vanilla.

P.S. Sorry for my english
 
Build 1
Z390 I AORUS PRO WIFI |  i7 9700K |  Radeon Nitro+ RX 5700 XT 8GB
Build 2
Z390 M GAMING |  i5 7600K |  RX 580 Pulse 8GB
AmnoN said:
I only used ProBook Installer. :|
Click to expand...

PBI-CE does not support this laptop yet.

UEFI hybrid
When i try switch to UEFI only i boot to Windows directly
don't know why :(
Click to expand...

Rename \EFI\Microsoft\Boot\bootmgfw.efi to bootmgfw-orig.efi.

Or you can setup a custom boot entry in BIOS for \EFI\CLOVER\CLOVERX64.efi.

As i wrote i'm only set in BIOS Memory to 64MB
In Windows i got Dedicated Video Memory = 64MB
So DVMT-prealloc must be 96MB as i understand
Click to expand...

It should be adequate.

Yes, vanilla.
Click to expand...

Post EFI/Clover folder and ioreg if you want me to look.
 
RehabMan said:
You're using an old version.
Click to expand...
Of course - you are right. Loaded last version, but again - it's not supported.

Bildschirmfoto 2015-08-16 um 22.03.47.png

Is there another way to get CPU Power Management running?
 
fatmaddin2000 said:
Thank you. Which one ist the right version. At hhis blog 15.8 is stated as recent version. Or do I need something completely different? Sorry for don't getting it.
Click to expand...

You need to use the 'Beta' branch. I don't see the changes required in the 'master' branch.

Link was provided in my previous post.
 
RehabMan said:
You need to use the 'Beta' branch. I don't see the changes required in the 'master' branch.

Link was provided in my previous post.
Click to expand...

Ah you are alright. Thank you. Didn't uninstall the old version. So I couldn't get it to run. Now it worked and I added my SSDT to the clover bootloader. I checked IOReg and the x86PlattformPlugin is loaded. Are there any other hints to check if it runs alright?

(Added the IOREG)

Thanks.
 
fatmaddin2000 said:
Ah you are alright. Thank you. Didn't uninstall the old version. So I couldn't get it to run. Now it worked and I added my SSDT to the clover bootloader. I checked IOReg and the x86PlattformPlugin is loaded. Are there any other hints to check if it runs alright?

(Added the IOREG)

Thanks.
Click to expand...

It looks correct. Test pstates with AppleIntelInfo.kext.
 
RehabMan said:
It looks correct. Test pstates with AppleIntelInfo.kext.
Click to expand...

Code: 
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: v1.0 Copyright © 2012-2014 Pike R. Alpha. All rights reserved
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: logMSRs............................: 1
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: logIGPU............................: 1
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: logIntelRegs.......................: 1
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: logCStates.........................: 1
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: logIPGStyle........................: 1
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: InitialTSC.........................: 0x2ab64c4833
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MWAIT C-States.....................: 286531872
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_CORE_THREAD_COUNT......(0x35)  : 0x20004
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PLATFORM_INFO..........(0xCE)  : 0x5053BF3011500
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PMG_CST_CONFIG_CONTROL.(0xE2)  : 0x1E008408
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PMG_IO_CAPTURE_BASE....(0xE4)  : 0x51814
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: IA32_MPERF.................(0xE7)  : 0x5DCB15E40
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: IA32_APERF.................(0xE8)  : 0x59A27AB35
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_FLEX_RATIO.............(0x194) : 0x0
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_IA32_PERF_STATUS.......(0x198) : 0x1C4F00001500
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_IA32_PERF_CONTROL......(0x199) : 0x1500
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: IA32_CLOCK_MODULATION......(0x19A) : 0x0
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: IA32_THERM_STATUS..........(0x19C) : 0x883B0800
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: IA32_MISC_ENABLES..........(0x1A0) : 0x850089
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_MISC_PWR_MGMT..........(0x1AA) : 0x400001
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_TURBO_RATIO_LIMIT......(0x1AD) : 0x151515151515
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: IA32_ENERGY_PERF_BIAS......(0x1B0) : 0x5
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_POWER_CTL..............(0x1FC) : 0x4005F
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_RAPL_POWER_UNIT........(0x606) : 0xA0E03
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PKG_POWER_LIMIT........(0x610) : 0x4280C800DD8078
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PKG_ENERGY_STATUS......(0x611) : 0x646A7C
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PKG_POWER_INFO.........(0x614) : 0x78
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PP0_CURRENT_CONFIG.....(0x601) : 0x4010141400000100
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PP0_POWER_LIMIT........(0x638) : 0x0
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PP0_ENERGY_STATUS......(0x639) : 0x30AA05
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PP0_POLICY.............(0x63a) : 0x0
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PKGC6_IRTL.............(0x60b) : 0x8873
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PKG_C2_RESIDENCY.......(0x60d) : 0xAF2C7D253
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PKG_C3_RESIDENCY.......(0x3f8) : 0x776193AE6
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: MSR_PKG_C6_RESIDENCY.......(0x3f9) : 0x0
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: IA32_TSC_DEADLINE..........(0x6E0) : 0x2AB761C05F
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: CPU Low Frequency Mode.............: 500 MHz
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: CPU Maximum non-Turbo Frequency....: 2100 MHz
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: CPU Maximum Turbo Frequency........: 2100 MHz
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: IGPU Current Frequency.............:  500 MHz
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: IGPU Minimum Frequency.............:  300 MHz
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: IGPU Maximum Non-Turbo Frequency...:  300 MHz
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: IGPU Maximum Turbo Frequency.......:  900 MHz
Aug 17 12:19:56 Air kernel[0]: AICPUPMI: IGPU Maximum limit.................: No Limit
Aug 17 12:19:57 Air kernel[0]: AICPUPMI: CPU P-States [ (13) 18 21 ] iGPU P-States [ (10) ]
Aug 17 12:19:57 Air kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 3 ]
Aug 17 12:19:57 Air kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 3 ]
Aug 17 12:19:57 Air kernel[0]: AICPUPMI: CPU P-States [ (12) 13 18 19 21 ] iGPU P-States [ (10) ]
Aug 17 12:19:57 Air kernel[0]: AICPUPMI: CPU C3-Cores [ 0 1 2 3 ]
Aug 17 12:19:57 Air kernel[0]: AICPUPMI: CPU C6-Cores [ 0 1 2 3 ]
Aug 17 12:19:59 Air kernel[0]: AICPUPMI: CPU P-States [ 12 (13) 16 18 19 21 ] iGPU P-States [ (10) ]
Aug 17 12:20:03 Air kernel[0]: AICPUPMI: CPU P-States [ 12 (13) 15 16 18 19 21 ] iGPU P-States [ (10) ]
Aug 17 12:20:04 Air kernel[0]: AICPUPMI: CPU P-States [ 12 (13) 14 15 16 18 19 21 ] iGPU P-States [ (10) ]
Does it look alright for you?
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top