Contribute
Register

Help me decipher -v output. Almost there but slow boot up at 1 point.

Status
Not open for further replies.
Joined
Oct 21, 2012
Messages
119
Motherboard
Hackintosh/PC
CPU
i5 3570K
Graphics
GTX 690
Mac
Classic Mac
Mobile Phone
Hey all,

As you can see its 1:10 in the morning and I a have been at this all day :) I have built and installed the system, all is working well but I have a few issues. First up is a slightly slow boot up. In -V mode it fly's through right up until 8 lines from the end (macx_swapon SUCCESS) this appears and then a 30secs pause before the login screen appears. i am presuming everything after the (macx_swapon SUCCESS) is the issue but I am new to this so I could be wrong.

Any help appreciated.

MSI-Z77 Mobo
I5 Ivy Bridge
8GB Ram
GeForce 210
SSD

I have to use PCIRootUID=0 to get into OS, I have aded this to chameleon.plist so I no longer need to use the USB Boot Loader etc. This is the only change I have made.



Last login: Thu Nov 22 00:59:32 on console
daniels-mac-pro:~ Tucker$ sudo dmesg
Password:
PMAP: PCID enabled
PMAP: Supervisor Mode Execute Protection enabled
Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
vm_page_bootstrap: 2017076 free pages and 63692 wired pages
kext submap [0xffffff7f80741000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff8000741000]
zone leak detection enabled
standard timeslicing quantum is 10000 us
standard background quantum is 2500 us
mig_table_max_displ = 74
TSC Deadline Timer supported and enabled
corecrypto kext started!
Running kernel space in FIPS MODE
Plist hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
Computed hmac value is 735d392b68241ef173d81097b1c8ce9ba283521626d1c973ac376838c466757d
corecrypto.kext FIPS integrity POST test passed!
corecrypto.kext FIPS AES CBC POST test passed!
corecrypto.kext FIPS TDES CBC POST test passed!
corecrypto.kext FIPS AES ECB AESNI POST test passed!
corecrypto.kext FIPS AES XTS AESNI POST test passed!
corecrypto.kext FIPS SHA POST test passed!
corecrypto.kext FIPS HMAC POST test passed!
corecrypto.kext FIPS ECDSA POST test passed!
corecrypto.kext FIPS DRBG POST test passed!
corecrypto.kext FIPS POST passed!
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
calling mpo_policy_init for TMSafetyNet
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
calling mpo_policy_init for Sandbox
Security policy loaded: Seatbelt sandbox policy (Sandbox)
calling mpo_policy_init for Quarantine
Security policy loaded: Quarantine policy (Quarantine)
Copyright (c) 1982, 1986, 1989, 1991, 1993
The Regents of the University of California. All rights reserved.


MAC Framework successfully initialized
using 16384 buffer headers and 10240 cluster IO buffer headers
IOAPIC: Version 0x20 Vectors 64:87
ACPI: System State [S0 S3 S4 S5]
AppleIntelCPUPowerManagement: Turbo Ratios 2344PFM64 (36 cpu) 0xf80000000, 0x80000000
[ PCI configuration begin ]


AppleIntelCPUPowerManagement: (built 00:59:42 Aug 25 2012) initialization complete
HWSensors Project Copyright 2012 netkas, slice, usr-sse2, kozlek, navi, THe KiNG. All rights reserved.
FakeSMCDevice: 13 preconfigured key(s) added
SMC: successfully initialized
CPUSensors: CPU family 0x6, model 0x3a, stepping 0x9, cores 4, threads 4, TJmax 105
console relocated to 0xf91000000
PCI configuration changed (bridge=3 device=1 cardbus=0)
[ PCI configuration end, bridges 5 devices 12 ]
mbinit: done [96 MB total pool size, (64/32) split]
Pthread support ABORTS when sync kernel primitives misused
PXSX cannot assert wake from D3cold
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
rooting via boot-uuid from /chosen: F1DD59F0-3720-3D91-9331-8F91EB1C7EED
Waiting on <dict ID="0"><key>IOProviderClass</key><string ID="1">IOResources</string><key>IOResourceMatch</key><string ID="2">boot-uuid-media</string></dict>
com.apple.AppleFSCompressionTypeZlib kmod start
com.apple.AppleFSCompressionTypeDataless kmod start
com.apple.AppleFSCompressionTypeZlib load succeeded
com.apple.AppleFSCompressionTypeDataless load succeeded
AppleIntelCPUPowerManagementClient: ready
GeForceSensors (0): chipset: GT218 (NVA8) bios: 70.18.5f.00
GeForceSensors (0): started
SuperIODevice: found Fintek F71869A on port=0x4e address=0x290
F718xxSensors: started
USBMSC Identifier (non-unique): 20053953930CA641E302 0x781 0x556b 0x126
ath_get_caps[4038] rx chainmask mismatch actual 7 sc_chainmak 0
0.902118: ath_get_caps[4013] tx chainmask mismatch actual 7 sc_chainmak 0
0.910555: Atheros: mac 448.3 phy 0.0 radio 0.0
0.913947: Use hw queue 0 for WME_AC_BE traffic
0.917350: Use hw queue 1 for WME_AC_BK traffic
0.920741: Use hw queue 2 for WME_AC_VI traffic
0.924084: Use hw queue 3 for WME_AC_VO traffic
0.927444: Use hw queue 8 for CAB traffic
0.930713: Use hw queue 9 for beacons
0.934001: wlan_vap_create : enter. devhandle=0xd169e658, opmode=IEEE80211_M_STA, flags=0x1
0.938175: wlan_vap_create : exit. devhandle=0xd169e658, opmode=IEEE80211_M_STA, flags=0x1.
0.942395: start[1012] sc->sc_inuse_cnt is at offset: 203c, sizeof(_sc->sc_ic) is 25f0
Got boot device = IOService:/AppleACPIPlatformExpert/PCI0@0/AppleACPIPCI/SAT0@1F,2/AppleAHCI/SPT3@3/IOAHCIDevice@0/AppleAHCIDiskDriver/IOAHCIBlockStorageDevice/IOBlockStorageDriver/SanDisk SDSSDX120GG25 Media/IOGUIDPartitionScheme/Mountain Lion@2
BSD root: disk0s2, major 1, minor 2
Kernel is LP64
AirPort_AtherosNewma40: Ethernet address 64:70:02:22:67:eb
IO80211Controller::dataLinkLayerAttachComplete(): adding AppleEFINVRAM notification
IO80211Interface::efiNVRAMPublished():
2.768038: ATHR: unknown locale: 21
AtherosNewma40P2PInterface::init name <p2p0> role 1 this 0xffffff80123e7000
AtherosNewma40P2PInterface::init() <p2p> role 1
AirPort: Link Down on en0. Reason 1 (Unspecified).
en0::IO80211Interface::postMessage bssid changed
3.875762: ATHR: unknown locale: 21
NVDANV50HAL loaded and registered.
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: Copyright (c) 2008 by Kabyl
HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
HDAEnabler: 05/05/2008 Added SP-Audio support by Taruga
HDAEnabler: 03/07/2009 Compiled for 32/64-bit by Taruga
[IOBluetoothHCIController][start] -- completed
Previous Shutdown Cause: 5
DSMOS has arrived
3.954104: setDISASSOC from ATH_INTERFACE_CLASS disconnectVap
WARNING: IOPlatformPluginUtil : getCPUIDInfo: this is an unknown CPU model 0x3a
-- power management may be incomplete or unsupported
3.965307: switchVap from 1 to 1
3.973865: ATHR: unknown locale: 21
3.976986: performCountryCodeOperation: Not connected, scan in progress[0]
3.982429: setWOW_PARAMETERS:wowevents = 2(1)
3.987690: ATHR: unknown locale: 21
3.990718: ATHR: unknown locale: 21
4.073917: setWOW_PARAMETERS:wowevents = 2(1)
en0: BSSID changed to 00:8b:5d:84:ce:4a
en0::IO80211Interface::postMessage bssid changed
AirPort: Link Up on en0
en0: BSSID changed to 00:8b:5d:84:ce:4a
en0::IO80211Interface::postMessage bssid changed
AirPort: RSN handshake complete on en0
5.308294: ATHR: unknown locale: 21
5.318186: ATHR: unknown locale: 21
5.328016: ATHR: unknown locale: 21
macx_swapon SUCCESS
68.958635: ATHR: unknown locale: 21
Sound assertion in AppleHDACodecGeneric at line 360
Sound assertion in AppleHDACodecGeneric at line 360
Sound assertion in AppleHDACodecGeneric at line 360
Sound assertion in AppleHDACodecGeneric at line 360
virtual bool IOHIDEventSystemUserClient::initWithTask(task_t, void *, UInt32): Client task not privileged to open IOHIDSystem for mapping memory (e00002c1)
231.633631: ATHR: unknown locale: 21
 
Joined
Oct 21, 2012
Messages
119
Motherboard
Hackintosh/PC
CPU
i5 3570K
Graphics
GTX 690
Mac
Classic Mac
Mobile Phone
Joined
Oct 21, 2012
Messages
119
Motherboard
Hackintosh/PC
CPU
i5 3570K
Graphics
GTX 690
Mac
Classic Mac
Mobile Phone
Please find attached my IOReg Output. This may help.


1. Fresh Install - SSD, GT120 GFX, TP Link Wifi Card
2. MultiBeast - UserDSDT or DSDT Free Installation, ALC 892 Without DSDT, Trim Enabler, Lnx2Mac's Network, FakeSMC, FakeSMC Plugins
3. Edit org.chameleon.boot.plist to PCIRootUID=0
4. Graphics Enabler=Yes
5. Disk Utility Repair permissions
6. Kext Wizard Repair Permissions
7. Reboot
8. S/L/E Extensions appear before Darwin Kernel message



View attachment Daniel’s Mac Pro.zip
 

toleda

Moderator
Joined
May 20, 2010
Messages
24,086
Motherboard
Asus Maximus VII Impact
CPU
Core i7-4770K
Graphics
RX 560 + HD4600
Mac
  1. iMac
  2. MacBook Pro
  3. Mac mini
Classic Mac
  1. 512K
  2. LC
  3. Power Mac
Mobile Phone
  1. iOS
Please find attached my IOReg Output. This may help.


1. Fresh Install - SSD, GT120 GFX, TP Link Wifi Card
2. MultiBeast - UserDSDT or DSDT Free Installation, ALC 892 Without DSDT, Trim Enabler, Lnx2Mac's Network, FakeSMC, FakeSMC Plugins
3. Edit org.chameleon.boot.plist to PCIRootUID=0
4. Graphics Enabler=Yes
5. Disk Utility Repair permissions
6. Kext Wizard Repair Permissions
7. Reboot
8. S/L/E Extensions appear before Darwin Kernel message
Item 8. means there is a kernel cache problem for S/L/E that Disk Utility and the others cannot solve. Suggest a clean install with only DSDT Free Installation. Reboot with -v and see if kernel cache is OK (no extensions list). If OK with the vanilla system, run MultiBeast to install one of the above selections at a time and find the one breaks that kernel cache.
 
Joined
Oct 21, 2012
Messages
119
Motherboard
Hackintosh/PC
CPU
i5 3570K
Graphics
GTX 690
Mac
Classic Mac
Mobile Phone
UPDATE:

I decided to use a video camera to record the Verbose output as it passed so quickly and it is clearly critical information. It appears what I had thought was S/L/E was actually S/L/CoreServices. (Please see attached file)

Based on your recommendation I then did a fresh install and installed items one at a time;

1. USB UniBeast Install using argument PCIRootUID=0
2. Boot from HDD using argument PCIRootUID=0
3. Run MultiBeast and select UserDSDT or DSDT-Free Installation & FakeSMC
4. Run Disk Permission Repair & Reboot

All is ok so far.

5. Boot from HDD using argument PCIRootUID=0
6. Edit org.chameloen.Boot.plist to read PCIRootUID=0
7. Run MultiBeast and select Disk-->Trim Enabler
8. Run Disk Permission Repair & Reboot

All is ok so far.

9. Boot from HDD.
10. Install 892 without DSDT
11. Run Disk Permission Repair & Reboot

Slow boot time, 30ish second pause after "macx_swapon SUCCESS. Login screen appears and mouse/keyboard freeze for 2mins before all working correctly.

I have attached the following for you to see;

1. Before Audio Install dmesg Output text file
2. Before Audio Install Verbose Output picture to see messages prior to "Loading Darwin Kernel 10.8"

3. After Audio Install dmesg Output text file
4. After Audio Install Verbose Output picture to see messages prior to "Loading Darwin Kernel 10.8"

5. IOReg in current state i.e. slow booting and mouse/keyboard issue

6. My org.chameleon.Boot.plist file.


Kind Regards.
 

Attachments

  • Information.zip
    2.4 MB · Views: 99

toleda

Moderator
Joined
May 20, 2010
Messages
24,086
Motherboard
Asus Maximus VII Impact
CPU
Core i7-4770K
Graphics
RX 560 + HD4600
Mac
  1. iMac
  2. MacBook Pro
  3. Mac mini
Classic Mac
  1. 512K
  2. LC
  3. Power Mac
Mobile Phone
  1. iOS
UPDATE:

I decided to use a video camera to record the Verbose output as it passed so quickly and it is clearly critical information. It appears what I had thought was S/L/E was actually S/L/CoreServices. (Please see attached file)

All is ok so far.

9. Boot from HDD.
10. Install 892 without DSDT
11. Run Disk Permission Repair & Reboot

Slow boot time, 30ish second pause after "macx_swapon SUCCESS. Login screen appears and mouse/keyboard freeze for 2mins before all working correctly.
Initial questions:
1. What kind of keyboard and mouse?
2. What kexts are in Extra/Extensions?
3. Are you using MultiBeast for Step 10 above?
4. Why are you running Disk Utility after kext install and what does it find?
5. How do you shut down the system (I am not familiar with Shutdown Cause: 5)?
6. If Before Audio is a clean installation, why is HDAEnabler1.kext loading?
 
Joined
Oct 21, 2012
Messages
119
Motherboard
Hackintosh/PC
CPU
i5 3570K
Graphics
GTX 690
Mac
Classic Mac
Mobile Phone
1. What kind of keyboard and mouse?
ADVENT USB Wired Keyboard(1.1) & Mouse(2.0)
2. What kexts are in Extra/Extensions?
I have no /Extensions folder in my Extra Folder. i.e. Root/Extra/Extensions. The Extra Folder only contains org.chameleon.Boot.plist, smbios.plist & Themes Folder. Are you referring to another location?
3. Are you using MultiBeast for Step 10 above?
Yes I am.
4. Why are you running Disk Utility after kext install and what does it find?
Simply to ensure all permissions are correct, this was something you had mentioned previously. In its initial run (4) it will find around 10 (I have never counted specifically, they are things like Are: xyyx -x -y, should be xyxy -xx or something of that sort. Would details be beneficial?)
5. How do you shut down the system (I am not familiar with Shutdown Cause: 5)?
Apple Logo top left/Shut Down. It will occasionally list a few things here in very small print before shutting down.
6. If Before Audio is a clean installation, why is HDAEnabler1.kext loading?
I have somehow overwritten as opposed to save as, the time stamps are the same. I will repeat the process again with the correct file attached and details on permissions repaired.

Kind Regards.
 

toleda

Moderator
Joined
May 20, 2010
Messages
24,086
Motherboard
Asus Maximus VII Impact
CPU
Core i7-4770K
Graphics
RX 560 + HD4600
Mac
  1. iMac
  2. MacBook Pro
  3. Mac mini
Classic Mac
  1. 512K
  2. LC
  3. Power Mac
Mobile Phone
  1. iOS
2. What kexts are in Extra/Extensions?
I have no /Extensions folder in my Extra Folder. i.e. Root/Extra/Extensions. The Extra Folder only contains org.chameleon.Boot.plist, smbios.plist & Themes Folder. Are you referring to another location?
The After Audio Install Verbose Output.png shows your system is on hd(1,2) and shows loading the Extra/Extensions folder on hd(0,1). If possible, unplug hd0.
 
Joined
Oct 21, 2012
Messages
119
Motherboard
Hackintosh/PC
CPU
i5 3570K
Graphics
GTX 690
Mac
Classic Mac
Mobile Phone
Will look into this now.

I have a Sandisk SSD, Sony DVD Drive and the Unibeast USB stick Installed only, how odd. I will remove the DVD & USB UniBeast stick.

Attached is an updated Folder with Pre & Post dmesg outputs (done correctly this time) as well as screenshots of disk utilities findings SC1 is after initial MultiBeast Install (UserDSDT, Trim, FakeSMC) and SC2 is after audio install.
 

Attachments

  • MK2.zip
    3.7 MB · Views: 98
Joined
Oct 21, 2012
Messages
119
Motherboard
Hackintosh/PC
CPU
i5 3570K
Graphics
GTX 690
Mac
Classic Mac
Mobile Phone
I have removed the DVD Drive, so now I only have the SSD and USB UniBeast Drive to allow me to input -v. It still list the same as 'After Audio Install Verbose Output' HD 1,2 initially then loading the Extensions from 0,1.

I have only been rewriting the partition each time I reinstall, this would delete the though data right?

I will try a fresh install with a HDD erase first when I am back later.

Kind Regards

Dan.
 
Status
Not open for further replies.
Top