HD5500 HDMI not working and other problems.

[vatsa131]

Hello,

I have inspiron 3543 i5-5200U-HD5500(128mb DVM), HDMI doesn't work properly(see images below).Before Rehabman's HD5500 plist for audio, TV image came for a second and then white noise and it connect's and reconnects repeatedly. After installing plist, now TV recognises as HDMI but still same issue on 1080p TV, when take it to 720p and 50hz it works for a bit but screen garbles a lot. I have attached clover,ioreg with and without HDMI plugged in. HDMI audio doesn't work even after the patch. Currently on VoodooHDA (somehow cannot install AppleHDA -Alc255), Usb 3.0 port detects at usb 3.0 & screen does not turn on after sleep.

I have patched DSDT and SSDT, PM works(with SSDT) but still cannot hear fan at full speed even during Geekbench. Using voodoo PS2 controller- scroll gesture not smooth & other gestures don't work. Getting 2-3 seconds on garbling during boot and then brightness goes to 0 (after updating BIOS, now I can increase brightness during that time). Sometimes getting OSXAptioFixDRV cannot realloc during boot (Tried OSXAptioFix2DRV, same problem).

I have attached files for you to understand. Hope you can help.

 

[RehabMan]

Hello,

I have inspiron 3543 i5-5200U-HD5500(128mb DVM), HDMI doesn't work properly(see images below).Before Rehabman's HD5500 plist for audio, TV image came for a second and then white noise and it connect's and reconnects repeatedly. After installing plist, now TV recognises as HDMI but still same issue on 1080p TV, when take it to 720p and 50hz it works for a bit but screen garbles a lot. I have attached clover,ioreg with and without HDMI plugged in. HDMI audio doesn't work even after the patch. Currently on VoodooHDA (somehow cannot install AppleHDA -Alc255), Usb 3.0 port detects at usb 3.0 & screen does not turn on after sleep.

I have patched DSDT and SSDT, PM works(with SSDT) but still cannot hear fan at full speed even during Geekbench. Using voodoo PS2 controller- scroll gesture not smooth & other gestures don't work. Getting 2-3 seconds on garbling during boot and then brightness goes to 0 (after updating BIOS, now I can increase brightness during that time). Sometimes getting OSXAptioFixDRV cannot realloc during boot (Tried OSXAptioFix2DRV, same problem).

I have attached files for you to understand. Hope you can help.

Your ioreg is corrupt. Correct ioreg procedures are in the FAQ, "Problem Reporting".
http://www.tonymacx86.com/el-capita...faq-read-first-laptop-frequent-questions.html

 

[vatsa131]

Using Ioregistryexplorer 3.0.2

 

[Feartech]

Using Ioregistryexplorer 3.0.2

the guide says to use version 2.1

 

[RehabMan]

Using Ioregistryexplorer 3.0.2

Read FAQ, "Problem Reporting"
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Read it carefully.

 

[vatsa131]

Sorry, dint read that line now using Ioregistryexplorer 2.1. Also sorry for mistake in first post, USB 3.0 port is detected in usb 2.0 Bus and also BCM20702A0 shows speed upto 12mbps. Looking forward to make 10.12.3 as my daily driver.

 

[RehabMan]

Hello,

I have inspiron 3543 i5-5200U-HD5500(128mb DVM), HDMI doesn't work properly(see images below).Before Rehabman's HD5500 plist for audio, TV image came for a second and then white noise and it connect's and reconnects repeatedly. After installing plist, now TV recognises as HDMI but still same issue on 1080p TV, when take it to 720p and 50hz it works for a bit but screen garbles a lot. I have attached clover,ioreg with and without HDMI plugged in. HDMI audio doesn't work even after the patch. Currently on VoodooHDA (somehow cannot install AppleHDA -Alc255), Usb 3.0 port detects at usb 3.0 & screen does not turn on after sleep.

I have patched DSDT and SSDT, PM works(with SSDT) but still cannot hear fan at full speed even during Geekbench. Using voodoo PS2 controller- scroll gesture not smooth & other gestures don't work. Getting 2-3 seconds on garbling during boot and then brightness goes to 0 (after updating BIOS, now I can increase brightness during that time). Sometimes getting OSXAptioFixDRV cannot realloc during boot (Tried OSXAptioFix2DRV, same problem).

I have attached files for you to understand. Hope you can help.

ACPI not patched correctly. Based on ACPI/origin, you should have in ACPI/patched:
DSDT.aml
SSDT.aml (ssdtPRgen.sh)
SSDT-0.aml
SSDT-1.aml
SSDT-2.aml
SSDT-3.aml
SSDT-4.aml
SSDT-8.aml

Also, SortedOrder is required to load SSDTs in correct order.

Also, you didn't even apply a fix for _OSI ("OS Check Fix"). The ACPI patching guide is linked from the FAQ.

Why so many patches in KextsToPatch? You have everything including the kitchen sink there. Use only the patches required.
Some of the patches are not well commented as to their purpose (for example 'gpu').
Remove any patch where you don't understand why you need it...

It appears your USB3 controller is disabled.

Boot glitch patch is documented here: https://www.tonymacx86.com/threads/readme-common-some-unsolved-problems-in-10-12-sierra.202316/

Google Chrome is hooking your USB ports. Read related topic in FAQ.

You should check your NVRAM implementation (for zero brightness issue). For some laptops you need EmuVariableUefi-64.efi and "RC scripts".

You should use OsxAptioFixDrv-64.efi instead of OsxAptioFix2Drv-64.efi.
config.plist/SystemParameters/InjectKexts should be "Detect", not "Yes" (you're injecting duplicate kexts that are already installed). All kexts you need should be installed to the system volume, as per Clover guide, post #2.

 

[vatsa131]

Hello,

I didnt get good extract with clover(had many errors) so had used patchmatic(attaching it).

Now I have set the sorted order and also Inject kexts='Detect' and also disabled extra KextToPatch,but no improvement in hdmi, Monitor doesnt even detect hdmi now .

 

[RehabMan]

I didnt get good extract with clover(had many errors) so had used patchmatic(attaching it).

Patchmatic is not a valid way to extract native files (the files it extracts are affected by Clover actions).
Extract with Clover F4 as per guide.

 

[vatsa131]

Now repatched everything with clover's acpi files. But still having the hdmi issue(attaching clover folder).