- Joined
- Sep 17, 2011
- Messages
- 22
- Motherboard
- GA-Z68MA-D2H-B3
- CPU
- i7 2600
- Graphics
- GIGABYTE GTX 560 Ti
- Mac
- Classic Mac
- Mobile Phone
Ok, scratching my head since weeks and looking on both here and google..
let's summarize the situation:
<- my setup is there
-I upgraded my bios to the UEFI version and followed memmerson's guide
-of course I enabled the integrated gfx in the bios (and tried different memory settings), but..
-..the installation of ML was painful until I plugged back my 560 Ti to finally get something on my display
- everything works perfectly now...except my HD 3000 which is not even listed in About this Mac / System Report
errors:
-If I plug both my display on the 560ti and TV on the hd3000> white screens
-display plugged on hd3000 only (have to force priority in the bios otherwise the screen auto-sleep)> depending on what I do, either a KP on the apple screen or green lines blinking or... a mix of both..
message before the apple screen:
ERROR: dcbtable_version is 0x1
ERROR: nVidia ROM Patching Failed!
I need it working because I want to use its HDMI for the audio, since I thought it would be easier to set it up that way instead of creating my own DSDT (UEFI...no choice...I get to many errors and I have no clue of what I'm doing) with all the edits afterwards...
any help on getting the hd3000 working or successful DSDT creation will appreciated
let's summarize the situation:
<- my setup is there
-I upgraded my bios to the UEFI version and followed memmerson's guide
-of course I enabled the integrated gfx in the bios (and tried different memory settings), but..
-..the installation of ML was painful until I plugged back my 560 Ti to finally get something on my display
- everything works perfectly now...except my HD 3000 which is not even listed in About this Mac / System Report
errors:
-If I plug both my display on the 560ti and TV on the hd3000> white screens
-display plugged on hd3000 only (have to force priority in the bios otherwise the screen auto-sleep)> depending on what I do, either a KP on the apple screen or green lines blinking or... a mix of both..
message before the apple screen:
ERROR: dcbtable_version is 0x1
ERROR: nVidia ROM Patching Failed!
I need it working because I want to use its HDMI for the audio, since I thought it would be easier to set it up that way instead of creating my own DSDT (UEFI...no choice...I get to many errors and I have no clue of what I'm doing) with all the edits afterwards...
any help on getting the hd3000 working or successful DSDT creation will appreciated