Having Trouble getting into Welcome Screen

[DylanMac]

Hello, when ever I try to boot from the USB stick I get the error System uptime in nanoseconds. Here is a picture.... (Using Boot flags -v -f -x) And it is the same when I use GraphicsEnabler=No/Yes



Computer:
CPU: Intel Core i7-4790K 4.0GHz Quad-Core Processor
GPU: Gigabyte GeForce GTX 970 4GB WINDFORCE Video Card
Motherboard: Gigabyte GA-H97-D3H ATX LGA1150 Motherboard
Wifi: TP-Link TL-WDN4800 802.11a/b/g/n PCI-Express x1 Wi-Fi Adapter
RAM: Crucial Ballistix Tactical 8GB (1 x 8GB) DDR3-1600 Memory

Maybe I didn’t setup the BIOS correctly? I set up SATA to ACHI and disabled VT-D.

 

[DylanMac]

Ok, so I fixed the issue and got to the install screen by removing the GPU and then installing and then I will put the graphics drivers on and then install the GTX 970.

 

[Jithin.C.V]

Hello, when ever I try to boot from the USB stick I get the error System uptime in nanoseconds. Here is a picture.... (Using Boot flags -v -f -x) And it is the same when I use GraphicsEnabler=No/Yes

View attachment 135839

Computer:
CPU: Intel Core i7-4790K 4.0GHz Quad-Core Processor
GPU: Gigabyte GeForce GTX 970 4GB WINDFORCE Video Card
Motherboard: Gigabyte GA-H97-D3H ATX LGA1150 Motherboard
Wifi: TP-Link TL-WDN4800 802.11a/b/g/n PCI-Express x1 Wi-Fi Adapter
RAM: Crucial Ballistix Tactical 8GB (1 x 8GB) DDR3-1600 Memory

Maybe I didn’t setup the BIOS correctly? I set up SATA to ACHI and disabled VT-D.

Your installation/booting stuck with deadbeef error

Include bootflag "maxmem=Value" while booting.

*Replace Value with the 1/4[SUP]th[/SUP] value of the total installed RAM Size.

Eg:- If you have 16GB RAM Installed then use as "maxmem=4096"

If that is also resulting in the same Kernel Panic. Then boot with the flag "-no-zp"

Good Luck..!