How did you manage to run it? Thanks a lot
I used a very basic set of Multibeast settings:
Quick start option> DSDT FREE
Drivers>Audio>ALC887/888b Current V100302
Drivers>Disk>3rd party SATA
Drivers>Graphics>NO OPTION SELECTED HERE
Drivers>Misc>USB 3.0 - Universal
Drivers>Network>Realtek>RealtekRT8111 v 1.2.0
Drivers>System>NO OPTION SELECTED HERE
Boot Loaders>Chimera v3.0.1
Customize>Instant Menu
Customize>1080p Display Mode
Once you have built the Multibeast settings (
DON'T restart yet)
Download Chameleon Wizard Here
ttp://wizards.osxla...n/download.html
Find your Chameleon.Boot.plist in extra folder on you hard disk "right click" open with choose other set drop down to all applications choose Chameleon Wizard.
You will now see a number of boot flags you can apply to you Boot.plist.
I only added two:
- Right hand column tick the check box for - Graphics Enabler
- In the Kernel Flags tick the check box on - dart=0
Click Save and restart you machine.
You should now be able to boot straight in to mac without safe mode flag.
Regards
Dean
- - - Updated - - -
Please share how you managed to get it going. I am running into the same problem on the following system:
MB:
GA-H87N-WIFI
CPU: Intel i5 4750
Ram: 8GB 1600Mhz DDR (4x2)
GFX: GeForce GTX 770 2GB
PS: Corsair CS 550 Watt Modular
Thanks in advance!
I used a very basic set of Multibeast settings:
Quick start option> DSDT FREE
Drivers>Audio>ALC887/888b Current V100302
Drivers>Disk>3rd party SATA
Drivers>Graphics>NO OPTION SELECTED HERE
Drivers>Misc>USB 3.0 - Universal
Drivers>Network>Realtek>RealtekRT8111 v 1.2.0
Drivers>System>NO OPTION SELECTED HERE
Boot Loaders>Chimera v3.0.1
Customize>Instant Menu
Customize>1080p Display Mode
Once you have built the Multibeast settings (
DON'T restart yet)
Download Chameleon Wizard Here
ttp://wizards.osxla...n/download.html
Find your Chameleon.Boot.plist in extra folder on you hard disk "right click" open with choose other set drop down to all applications choose Chameleon Wizard.
You will now see a number of boot flags you can apply to you Boot.plist.
I only added two:
- Right hand column tick the check box for - Graphics Enabler
- In the Kernel Flags tick the check box on - dart=0
Click Save and restart you machine.
You should now be able to boot straight in to mac without safe mode flag.
Regards
Dean