Hackintosh Freezing issue

[ksood]

First off here is my hackintosh's specs:

Gigabyte Z77X-UD5H
I7 2600K (NOT OVERCLOCKED AND USING SSDT)
MSI POWER EDITION 660 TI(NOT OVERCLOCKED)
THE OS IS RUNNING ON A 500GB DRIVE(I WILL BE GETTING A SSD SOON)
120GB SSD (FOR WINDOWS)
CORSAIR 650 WATT PSU
HYPER 212 EVO CPU FAN
16GB KINGSTON RAM
SAMSUNG 22X DVD DRIVE
CASE: CORSAIR 400R
no bluetooth dongle
using ethernet
not using DSDT

here is the guide i used the only difference between his and mine is that i have a sandy bridge processor: http://www.tonymacx86.com/golden-bu...d5h-i7-3770k-gigabyte-geforce-gtx-660-ti.html

now my hackpro seems to be freezing a lot, everything will just stop, mouse will freeze and everything else will just stop, i have to hold down the power button to restart the system. No kernel panics at all. i did a clean install with the guide above to see if that fixed the problem but it didn't help. Any feedback will be appreciated as i need the problem fixed so i can get back to my video editing, and a little note i ran mem test to see if it was my ram but it came out clear so its not the ram.

 

[MiniITX]

Are running a 2nd gen CPU on a 7 series board?

check this thread http://www.tonymacx86.com/graphics/53925-qe-ci-hd3000-series-7-mainboards-2.html#post460625

let me know if you need help with DSDt.

 

[ksood]

do you think it could be a hardware issue? maybe faulty mobo or cpu? and do you think a dsdt would maybe fix the problem?

here are some solutions that I'm trying:

nothing plugged into usb 3 ports
took out card reader
i realized a bios setting was wrong so i fixed that

 

[ksood]

ok just got a kernel panic.....

 

[MiniITX]

Its not the hardware its the combination of 2nd CPU with 7 series board. OSX gets confused when you run 2nd gen cpu on 7 series board.

More info here http://www.tonymacx86.com/150-enabl...therboards-hd-4000-6-series-motherboards.html.

 

[ksood]

but isnt that for people that just use integrated gpu?

Its not the hardware its the combination of 2nd CPU with 7 series board. OSX gets confused when you run 2nd gen cpu on 7 series board.

More info here http://www.tonymacx86.com/150-enabl...therboards-hd-4000-6-series-motherboards.html.

 

[MiniITX]

I don't see anything odd other then that in your build..