[Guide] Z/H97N-WIFI with Nvidia Graphics using Clover UEFI Hotpatch

[VioletDragon]

ty

USBInjectAll seems to be missing from the Z-H97N-WIFI-Patches folder

can you elaborate on these steps:

Now we need to put FakeSMC & Ethernet kext, USBInjectAll in EFI/Clover/kexts/other. Remove 10+ folders. FakeSMC, AppleintelE1000e can be downloaded from downloads section.
You will need to replace the config with installer_nvidia_graphics or installer_nvidia_graphics_nvdia_disable=1. rename to config.
Ethernet kexts you will need depends on which Ethernet port you use. I Intel NIC. https://www.tonymacx86.com/resources/categories/kexts.11/
USBinjectAll can be downloaded from Rehabmans Fork. Read Readme first.
https://github.com/RehabMan/OS-X-USB-Inject-All

You are not following the guide as written. USBInjectall needs to be downloaded from http://github.com/RehabMan/OS-X-USB-Inject-All. I haven't put USBInjectall on my fork because it'll be out of date.

 

[PresidentEvil]

You are not following the guide as written. USBInjectall needs to be downloaded from http://github.com/RehabMan/OS-X-USB-Inject-All. I haven't put USBInjectall on my fork because it'll be out of date.

im sorry im not understanding what im supposed to do, i download and extract the zip from github but I see no kext file anywhere, other than XHCI-x99-injector.kext

 

[VioletDragon]

im sorry im not understanding what im supposed to do, i download and extract the zip from github but I see no kext file anywhere, other than XHCI-x99-injector.kext

Read the README. Or download from https://bitbucket.org/RehabMan/os-x-usb-inject-all/downloads

 

[merizza]

After putting the FakeSMC.kext, USBInjectAll.kext and the Ethernet kext in Library/Extensions, I get the following error message:

Can I ignore that?

 

[PresidentEvil]

so im on the part: "Now we need to install FakeSMC,Appleintel1000E and USBinjectall in Library/Extensions."

however im getting the following error for AppleIntelE1000e.kext, FakeSMC.kext, and USBInjectAll.kext

 

[P1LGRIM]

so im on the part: "Now we need to install FakeSMC,Appleintel1000E and USBinjectall in Library/Extensions."

however im getting the following error for AppleIntelE1000e.kext, FakeSMC.kext, and USBInjectAll.kext

The key word is "Install".
You should use an app like KextBeast to install the kexts correctly not just paste them into the folder.

 

[PresidentEvil]

went smoothly, after installing ALC892 audio via multibeast everything works now

thanks for the help

 

[VioletDragon]

After putting the FakeSMC.kext, USBInjectAll.kext and the Ethernet kext in Library/Extensions, I get the following error message:

Can I ignore that?

so im on the part: "Now we need to install FakeSMC,Appleintel1000E and USBinjectall in Library/Extensions."

however im getting the following error for AppleIntelE1000e.kext, FakeSMC.kext, and USBInjectAll.kext

You have broken permissions. Use Kextbeast or terminal to install.

 

[VioletDragon]

went smoothly, after installing ALC892 audio via multibeast everything works now

thanks for the help

Do not need to use ALC892 from Multibeast. You can use CodecCommander from RehabMans fork.

 

[DEATH-INC]

Do not need to use ALC892 from Multibeast. You can use CodecCommander from RehabMans fork.

Appreciate the guide! As far as this step goes do I just need install the Codec commander kext? I don't see the Codec Commander SSDT mentioned in the guide at all to put with the others.

Also is the AHCI_Series_9.kext in the cloned fork needed? The guide didn't say to put it in the clover kext folder so I did not. Sorry for the questions, I am rather new at this.