Guide To Install Yosemite on HP Laptops with Clover UEFI

[yildirim]

Are you certain it is not installed?

Post ioreg: http://www.tonymacx86.com/audio/58368-guide-how-make-copy-ioreg.html. Please, use the IORegistryExplorer v2.1 attached to the post! DO NOT reply to an ioreg from any other version of IORegistryExplorer.app.

thanks ,Ok downloaded and opened but In this software I have exactly what I search !?

 

[RehabMan]

thanks ,Ok downloaded and opened but In this software I have exactly what I search !?

Follow the instructions... save the file, and upload it.

 

[RehabMan]

now i have been installed Clover_v2k_r2692
and open flashdrive in verbose mode and this what happen
http://i.imgur.com/pIqrMCB.jpg

Check BIOS settings for CSM vs no CSM.

 

[yildirim]

Follow the instructions... save the file, and upload it.

Do you mean this file. You can see

 

[aleksandrpopov]

Screen resolution is missing.
Space bar at Clover screen... obvious from there.

Screen resolution is 1366 x 768 will update shortly.
I have tried with no caches - it does not boot (if not using flash drive)
Tried to boot from flash without cached - did cache refresh - did not worked

 

[RehabMan]

i am using settings for CSM
and this no csm
http://i.imgur.com/xee6Eco.jpg

Make sure the bootloader is set to the resolution of your internal screen.

Also, try disabling Radeon in BIOS.

 

[RehabMan]

Screen resolution is 1366 x 768 will update shortly.
I have tried with no caches - it does not boot (if not using flash drive)
Tried to boot from flash without cached - did cache refresh - did not worked

Show photo of failed "without caches" boot.

 

[RehabMan]

Do you mean this file. You can see

IOreg shows Atheros WiFi working.

 

[RehabMan]

i am disableing switchable graphics and enable it same resault

Out of ideas. Perhaps you should start over.

 

[RehabMan]

Perhaps i should start setup windows 7 but i have bought hp probook 4540s to install yosemite

It is up to you.