Can you post a link to the specs? I wanted to know what Realtek model it is.
sorry for the delay, i had a system crash and i had to recover (attached is the error report, i hope it helps)
With previews setup (14,2) for ventura was working well
-the hub is >
https://satechi.net/products/aluminum-type-c-multimedia-adapter
-hackintool shows is > "DSL6340 USB 3.1 Controller [Alpine Ridge]"
-specs from system >
USB 10/100/1000 LAN:
Bus: USB
Vendor Name: Realtek
Product Name: USB 10/100/1000 LAN
Vendor ID: 0x0bda
Product ID: 0x8153
USB Link Speed: Up to 5 Gb/s
Driver: com.apple.DriverKit.AppleUserECM
BSD Device Name: en0
MAC Address: 48:65:ee:1e:f8:dd
AVB Support: No
the setup is working well so far (only the hub error)
if i try to connect the cable, instantly i have system crash, black screen, power off
---
next day
i want to make a backup clone to be safe, (i always do)
so i begin with ccc the process , with failure
2. make an new clean installation sonoma and migration old data on new volume, boot success
3. next apply the patch for wifi with opcl, failure again, boot failure on new migrated os
so i made it again with no patch, no network
Resume
-the ccc wont work with opcl-sonoma
-the opcl patch make the system corrupted on backup system (second ssd disk)
-the ethernet-hub problem continuous
The patch installation working on the original ssd,m2 disk work fine only for wifi
i hope that make sense for further investigation