- Joined
- Jul 24, 2011
- Messages
- 114
- Motherboard
- GA-Z170X-UD3 F21 / Asus P8P67 Deluxe
- CPU
- i7 6600 / i7 2600
- Graphics
- EVGA 740sc 2GB / Asus NVIDIA GTX760
You can also try moving to F21.
How long have you ran on F21 bios? Any issues?
Thanks
You can also try moving to F21.
How long have you ran on F21 bios? Any issues?
Thanks
I will definitely look into it. Have you modified the USB-SSDT as suggested by cnrd?I've been running F21 for a month now and it's stable.
For anyone who have problems with my USB script after updating the BIOS to F20 please try this:
Open the USB-SSDT in MaciASL (RehabMan-MaciASL-2016-0423.zip)
Remove these two lines:
Code:External (HUBC, IntObj) // (from opcode) External (UMAP, IntObj) // (from opcode)
Replace these lines:
Code:Scope (\_SB) { Method (_INI, 0, NotSerialized) // _INI: Initialize { Store ("Method \\_SB._INI Called", Debug) Store (***SOMEHEXCODE***, \HUBC) Store (***SOMEOTHERHEXCODE***, \UMAP) } }
with:
Code:Name (HUBC, ***SOMEHEXTCODE***) Name (UMAP, ***SOMEOTHERHEXCODE***)
By: ***SOMEHEXCODE*** and ***SOMEOTHERHEXCODE*** I mean, there is a value there, on mine it's: 0xC243 and 0x013C, copy those and use them in the replaced code (Use your own, those are only an example).
The problem is there because Gigabyte changed some of their ACPI code in the F20 BIOS (They removed the HUBC and UMAP from DSDT, which means we can no longer write these values to the fields in the DSDT).
Yes, I was having problems with the USB devices randomly not being recognized and after I did that everything works fine.I will definitely look into it. Have you modified the USB-SSDT as suggested by cnrd?
Thanks for helping out
Loaded F21 bios but rear USB 3 ports still not working. No improvement with original USB-SSDT.aml file and modified one.Yes, I was having problems with the USB devices randomly not being recognized and after I did that everything works fine.
At one point I was suspecting that it wasn't a revision 1.0, but it looks like it is.That's pretty weird. I don't see how this motherboard responds differently since you've used this guide step by step as I did and everything works fine.