- Joined
- Nov 21, 2016
- Messages
- 64
- Motherboard
- Gigabyte GA-Z170X-UD3 Rev.1.0
- CPU
- Intel Core i7, 7700K, 4.2 GHz
- Graphics
- 5500XT
- Mac
- Classic Mac
- Mobile Phone
Yea I looked for the last version of everything... sorry I forgot to say that XD
i had a similar problem with the nvidia drivers, read on another thread somewhere, i needed to install EmuVariableUefi in order for NVRAM to work. you can install it using clover configurator, then go into Pref's Panel and set drivers to nvidia. Make sure you have NvidiaWeb checked and also uncheck nv_disable and nvda_drv in your config
Ledde, check recommended BIOS settings
What device are you using for your test?but still slow at around 100 mb/s
10.12* ) gSysName=“Sierra”
gSysFolder=kexts/10.12
gSID=$(csrutil status)
;;
Code:<key>Devices</key> <dict> <key>AddProperties</key> <array> <dict> <key>Device</key> <string>IntelGFX</string> <key>Key</key> <string>AAPL,GfxYTile</string> <key>Value</key> <data> AQAAAA== </data> </dict> </array> </dict>
file for USB, there is no option for SS09 and SS08, which put my USB3 stick only readable from the SS0X ports. any update is appreciated. I shall look up the .command file in due course.