- Joined
- Jan 25, 2011
- Messages
- 84
- Motherboard
- Dell XPS 15 9550
- CPU
- 6th Generation Intel® Core™ i7-6700HQ Quad Core
- Graphics
- NVIDIA® GeForce® GTX 960M with 2GB GDDR5
I pulled SSDT-0 to -11 files from Clover/acpi/origin directory and went through one by one. I moved off Scope_PR.CPUx and fixed/compiled the rest, and placed them in the Clover/acpi/patch directory. Here is what I did in more detail:
SSDT Changes:
DONE - Moved Scope_PR.CPUx related to the directory “Filtered-Scope_PR.CPUx”
SSDT 3, 4, 5, 6, 7, 10
DONE SSDT-9. This one may affect Sleep/Wake. But changing/patching/compling this will require reseatation of other PR.CPUx
Has SB.PCCD. CPPC - A new technology based on the ACPI 5.0 specification that dynamically modulates performance vs. active application power. It reduces active power to deliver better battery life and allows deeper lower power states to be reached (compared to prior generations of Intel Core processor products).
Moved Scope_PR.CPUx related to the directory “Filtered-Scope_PR.CPUx”
DONE - SSDT-0
Has method KOU1 - not sure what to do. Deploy it to Clover.
DONE - SSDT-2
Has SB.PCI0.SAT1 - Compiled okay. SAT1 methods referenced from DSDT. Deploy to Clover..
DONE - SSD-11
Has SB.IFFS - SDD and NFSS configured with IFFS hibernation partition. Probably need for Sleep/Wake. Deploy to Clover.
DONE - SSDT-8
Has SB.PCI0.B0D3, SB.PCI0.VID. Changed VID to IGPU. AINT, GLIS, GSCI, GSSE method referenced from DSDT.
Changed PCI0.VID to PCI0.IGPU
DONE - SSDT-1
Has KOU2, SB.PCI0.VID.LCD0, SB.PCI0.VID.LCD0
Graphic LCD related. Changed PCI0.VID to PCI0.IGPU.
But, I am still cannot wake from sleep. I re-extracted the output of patchmatic, ioreg, and SSDT files i worked on. The patchmatic output shows the SSDT files I have added.
Any suggestion?
SSDT Changes:
DONE - Moved Scope_PR.CPUx related to the directory “Filtered-Scope_PR.CPUx”
SSDT 3, 4, 5, 6, 7, 10
DONE SSDT-9. This one may affect Sleep/Wake. But changing/patching/compling this will require reseatation of other PR.CPUx
Has SB.PCCD. CPPC - A new technology based on the ACPI 5.0 specification that dynamically modulates performance vs. active application power. It reduces active power to deliver better battery life and allows deeper lower power states to be reached (compared to prior generations of Intel Core processor products).
Moved Scope_PR.CPUx related to the directory “Filtered-Scope_PR.CPUx”
DONE - SSDT-0
Has method KOU1 - not sure what to do. Deploy it to Clover.
DONE - SSDT-2
Has SB.PCI0.SAT1 - Compiled okay. SAT1 methods referenced from DSDT. Deploy to Clover..
DONE - SSD-11
Has SB.IFFS - SDD and NFSS configured with IFFS hibernation partition. Probably need for Sleep/Wake. Deploy to Clover.
DONE - SSDT-8
Has SB.PCI0.B0D3, SB.PCI0.VID. Changed VID to IGPU. AINT, GLIS, GSCI, GSSE method referenced from DSDT.
Changed PCI0.VID to PCI0.IGPU
DONE - SSDT-1
Has KOU2, SB.PCI0.VID.LCD0, SB.PCI0.VID.LCD0
Graphic LCD related. Changed PCI0.VID to PCI0.IGPU.
But, I am still cannot wake from sleep. I re-extracted the output of patchmatic, ioreg, and SSDT files i worked on. The patchmatic output shows the SSDT files I have added.
Any suggestion?