- Joined
- Jan 24, 2017
- Messages
- 15
- Motherboard
- Gigabyte Z390 Aorus Elite
- CPU
- i5-9600K
- Graphics
- RX 580
- Mobile Phone
Thanks for the prompt reply. Unfortunately I had too much work last week so I had not time to test the above and reply.About sleep, this are the important things:
Pmset config
Put this command in Terminal and press INTRO. Notice that I have displaysleep 10, disksleep 15 and sleep 20, change it if necessary.
Code:sudo pmset autopoweroff 0;sudo pmset autorestart 0;sudo pmset displaysleep 10;sudo pmset disksleep 15;sudo pmset sleep 20;sudo pmset hibernatemode 0;sudo pmset powernap 0;sudo pmset proximitywake 0;sudo pmset standby 0;sudo pmset tcpkeepalive 1;sudo pmset ttyskeepawake 0;sudo pmset womp 0;defaults write com.apple.loginwindow PowerButtonSleepsSystem -bool no
Handoff
If Handoff is enabled (System Preferences >> General) sleep works worse than if it's disabled.
USB ports map
Since our mobos are identical, this is ok with my USBMap.kext.
Boot-arg
Try with darkwake=0 (obsolete argument but sometimes the system sleeps better) and agdpmod=pikera (not required for our RX 580 but I'v noticed that all seems to work better, even sleep).
Wake by USB mouse or keyboard (single touch)
- acpi-wake-type=01 in USB DeviceProperties
View attachment 527162
- SSDT-USBW.aml + USBWakeFixup.kext (see here).
Do you have MacPro7,1 in SMBIOS?
But now I tested the command and seems to be working very well. The rest of things you mentioned I already had, only handoff I don't use because I don't have bluetooth/wifi card.
I have iMac 19.1 in the SMBIOS, as you mentioned on the post with the Opencore 0.7.1 EFI folder.
I created the USB drive with Big Sur 11.5.1, two days later they released 11.5.2. Do you think I can update to that via Software Update?
Thank you for all the help!