[Guide] Lenovo Y50/Y70 (UHD or 1080p) using Clover UEFI

[teckdeck5]

"GenericUSBXHCI.kext is not necessary with this laptop since AppleUSBXCHI.kext appears to work well natively."

at first time this kext wasnt in it, im just trying, but thanks.
Unfortunately the problem is same.
Any other idea?

 

[RehabMan]

Rehabman,
For some reason, my laptop suddenly crapped out on me. Seemed to have lots to do with HDMI
And it just didn't want to boot, or display correctly
I'm on 10.11.1 beta 3, not sure if that makes a difference
Anyways, I assume something just got corrupted (during boot verbose it says things like removing orphaned files and directories), so I'm doing a clean install now

Update:
I ran into the problem several were having not able to boot into HDD. I booted USB and analyzed the EFI partition. Turns out, somehow sometimes Clover natively installs AptioFix2. Please check this if you are booting 3/4 of the way, then crash/rebooting

Clover will not install AptioFix2 unless you ask it to. Keep in mind, that the Clover installer remembers all previous selections, so once you select it in the past, it is forever selected in the future.

 

[RehabMan]

Hello again!

I ran into a problem. I followed (I tried to read carefully and do as same as in first post) the guide ann - i think - everything was ok until the first boot from hdd. Unfortunately when i boot from hdd, reach the loading about 3/4 and reboot. If i boot from install usb, everything is alright. (except: if i boot from hdd and after boot from usb first time it says: "computer restarted because of a problem")

This is my clover from hdd:
View attachment 155989

I have really read the guide carefully, i don't know what is the problem. Please help me! Thank You!

ACPI/patched/SSDT.aml is wrong. All _SB should be _PR.

GenericUSBXHCI.kext should not be used.

 

[teckdeck5]

ACPI/patched/SSDT.aml is wrong. All _SB should be _PR.

GenericUSBXHCI.kext should not be used.

i have deleted GenericUSBXHCI.kext.

But how can i correct Your first instruction? I think its not a good way to replace in maciASL


(I boot in verbose to give more information

 

[leog101]

hello!

I have

Lenovo IdeaPad Y50-70 59424201 - windows 10 /64 - yosemite 10.10 - clover only by usb

the operating system is installed but internet not working (Wifi-ethernet)
video output hdmi not work...

I use for clover the .plist in the pack: Lenovo-Y50-DSDT-Patch-master

I attached clover "efi" folder

I can not continue with the installation without internet.
how a can resolve internet and video

it is possible to install the patchs without internet, how to?

thanks in advance
Best Regards

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Lenovo IdeaPad Y50-70 59424201
39.6 cm (15.6") Notebook comes with Windows 8.1- now windows 10
Display: 1920 x 1080 pixel), glare
Intel Core i7-4710HQ 4x 2.50 GHz (3.50 GHz Turbo)
16 GB RAM, NVIDIA GeForce GTX 860M 4.0 GB
1.0 TB HDD, no optical drive
WLAN b/g/n, 2x USB 3.0, 1x USB 2.0, HDMI

 

[masterscarhead1]

hello!

I have

Lenovo IdeaPad Y50-70 59424201 - windows 10 /64 - yosemite 10.10 - clover only by usb

the operating system is installed but internet not working (Wifi-ethernet)
video output hdmi not work...

I use for clover the .plist in the pack: Lenovo-Y50-DSDT-Patch-master

I attached clover "efi" folder

I can not continue with the installation without internet.
how a can resolve internet and video

it is possible to install the patchs without internet, how to?

thanks in advance
Best Regards

:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::
Lenovo IdeaPad Y50-70 59424201
39.6 cm (15.6") Notebook comes with Windows 8.1- now windows 10
Display: 1920 x 1080 pixel), glare
Intel Core i7-4710HQ 4x 2.50 GHz (3.50 GHz Turbo)
16 GB RAM, NVIDIA GeForce GTX 860M 4.0 GB
1.0 TB HDD, no optical drive
WLAN b/g/n, 2x USB 3.0, 1x USB 2.0, HDMI

You did not follow the guide
I can't begin to mention all the different things that are wrong
You have 4!!!! config.plists there, 7 kext folders, 12 kexts and 2 directories in kext folder!

 

[RehabMan]

i have deleted GenericUSBXHCI.kext.

But how can i correct Your first instruction? I think its not a good way to replace in maciASL


(I boot in verbose to give more information
View attachment 156084

Using ssdtPRgen.sh as described in the guide will result in a correct SSDT.aml.

 

[RehabMan]

the operating system is installed but internet not working (Wifi-ethernet)

Did you replace your WiFi hardware with BCM94352Z?

video output hdmi not work...

Make sure you follow the guide exactly as written. Nothing more, nothing less.

 

[leog101]

Sorry,,,,
Please can you review this file.
thanks in advance!

 

[RehabMan]

Sorry,,,,
Please can you review this file.
thanks in advance!

You have no patched ACPI files in ACPI/patched.
Your config.plist is corrupt.
EFI/Clover/kexts is wrong, not according to the guide.

Follow the guide in post #1 as written.