[Guide] Lenovo Y50 (UHD or 1080p) using Clover UEFI

[RehabMan]

Sorry I upload the wrong folder, this is updated also with Ioreg file

With new edit the graphic glitch are increased a bit, expecially in desktop when boot up

Your ioreg still shows 0xa2e0008.
It is not surprising, as that's still what you have in config.plist.

Perhaps you should verify content before you upload it.

 

[Leafire]

Your ioreg still shows 0xa2e0008.
It is not surprising, as that's still what you have in config.plist.

Perhaps you should verify content before you upload it.

I changed config.plist With Plist editor pro
If You check in config.plust ig-.. Is changed

 

[RehabMan]

I changed config.plist With Plist editor pro
If You check in config.plust ig-.. Is changed

Check post #309 files yourself:
https://www.tonymacx86.com/threads/...using-clover-uefi.232960/page-31#post-1632470

This is what you will see:

 

[possiblyinfected]

Your version of Clover is very old.
Use my latest build.
Make sure BIOS settings are correct.

Hi Rehabman, updated to your latest build and still the same issue, BIOS settings are as stated in the guide (I'm 1080p, not UHD), legacy boot enabled, UEFI boot is first priority, secure boot is off. Problem Reporting files are attached as usual. I'd be grateful for any assistance ...

Not working - Trackpad gestures, Bluetooth, built in display is still glitchy/flashing (HDMI still works though on TV) ...

 

[RehabMan]

Hi Rehabman, updated to your latest build and still the same issue, BIOS settings are as stated in the guide (I'm 1080p, not UHD),
..
built in display is still glitchy/flashing (HDMI still works though on TV) ...

Attach photos of all BIOS settings (please bundle in a single ZIP of jpg).
Also, please provide all "Problem Reporting" data as per FAQ.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
(your files are missing ACPI/origin, and misc/preboot.log).

Not working - Trackpad gestures, Bluetooth,

According to ioreg, you failed to install compatible WiFi/BT hardware. Read post #1.
Not all trackpad gestures are supported.
Three finger swipes must be configured in SysPrefs->Keyboard->Shortcuts (do the swipe instead of pressing keys).

 

[Leafire]

Check post #309 files yourself:
https://www.tonymacx86.com/threads/...using-clover-uefi.232960/page-31#post-1632470

This is what you will see:
View attachment 293952
View attachment 293953

I change it in config.plist and reboot PC, in config.plist I see ig-platform-id= 0x260006
but in IOREG show me 0x0a2e0008,why?
I attach you file for check

 

[RehabMan]

I change it in config.plist and reboot PC, in config.plist I see ig-platform-id= 0x260006
but in IOREG show me 0x0a2e0008,why?
I attach you file for check

It is injected with config.plist/Devices/Arbitrary.
Must change it there too.
Like this:

 

[Leafire]

It is injected with config.plist/Devices/Arbitrary.
Must change it there too.

Ok done But now resolution make ALL desktop too little and app how Skype and Whatsapp don't show their Content..

 

[RehabMan]

Ok done But now resolution make ALL desktop too little and app how Skype and Whatsapp don't show their Content..

View attachment 294197

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

 

[Leafire]

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

This is all file