- Joined
- Sep 7, 2019
- Messages
- 192
- Motherboard
- INTEL NUC8i7BEH - Bios 74
- CPU
- i7-8559U
- Graphics
- Iris Plus 655
- Mac
Hi Pro, I installed on my NUC7i3BNH and all feature are working very well but my system using a lot of ram. Could you Pro can advise me how to reduce ram using by system. It's often use 8/12Gb of ram when I open Safari, when I open PTS it use 12/12Gb of ram, . I attached 2 pic from activity and from clean my Mac. Thank for your help.
It is normal for Mac OS X to use a third of the Ram at least when booting then swapping out to a tempo
Karate Chop! More like the Austin Powers of Hackintosh, yeah baby! . I don't have an answer for you but I'll check to see if I have the same issue and report back later. If I do its something new being I have always been able to select the Windows boot drive as default in the bios, or the boot option window, and then boot via boot manager.
Edit: At boot I hit the F10 key and choose Windows boot manager and it works so it is still installed and functional. Are you sure you are choosing the right partition to boot from?
That is weird. I have had this happen a few times now. If I REMOVE my MacOS hard drive completely from the NUC windows 10 wont boot at all. So I know I have chosen the correct hard drive boot manager.
I have backed up the windows EFI partition and boot files and will check time stamps and file size to see if Clover changes something.
The first time it happened was after I installed Windows 10 to the M.2. drive. I then installed Mojave Hackintosh to the SATA drive etc and then Windows 10 wouldn't boot if I took the Mojave SATA drive out of the NUC.
I have worked out a way to make it work now. If I am booting MAC I make sure to disable the SATA in bios which is where Windows 10 is installed. When I am booting Windows I disable M.2. though I don't need to do the latter but keeps the Mac Hard drive hidden from Windows.