- Joined
- Oct 15, 2011
- Messages
- 6
- Motherboard
- GIGABYTE - Motherboard - Socket 1155 - GA-Z77-D3H
- CPU
- Corei5 - Sandy Bridge - 2600K
- Graphics
- GIGABYTE GV-R785OC-2GD Radeon HD 7850 2GB 256-bit GDDR5
- Mac
- Classic Mac
- Mobile Phone
Hello, I have been a MAC enthusiast for a very long time now and I love how this community has contributed and has enabled us to enjoy/install MAC OS X systems as easy as eating a pie. Therefore i decided to contribute as well:
I have successfully installed a fresh copy of Mountain Lion which I purchased from the apple store and was able to install it on my system which is as follows:
Intel DH67BL; Details of which can be found at the link below:
Intel® Desktop Board DH67BL
Kingston Ram 6GB
ATI Radeon 5850 1GB Graphic card
Seagate 500 GB HD
Core i5 2500K Second Generation processor
Pre&Post Installation Procedure:
I used the same guide as shown in the link below to prepare my USB Flash drive & also followed the same steps listed in section 4 of the guide for post installation process; the guide's link is as below:
tonymacx86.com - UniBeast 1.5: Install OS X Mountain Lion on Any Supported Intel-based PC
The settings i used/selected in multi-beast 4.6.1 are:
* Easybeast install
* System utilities > Repair permissions
* Audio > NON-DSDT HDAEnabler > ALC 892
* Disk > 3rd party SATA & JMicron 36x SATA
* My graphic card worked/was detected out of the box (WOW!)
* Misc > EVOREBOOT & FAKE SMC & FAKE SMC PLUGIN & NullCPUpowerManagement & PS/2 keyboard/mice
* Network > hnak's AppleintelE1000 Ethernet
These are all settings i did using multi beast, and was able to get everything working. everything works.
My GeekBench score on intel 32-bit settings is 8599
Thank you TonyMacx86 community
P.S. Please i'd also like to know if i did something wrong, or could i have done something even better or do let me know if i missed something here. I'd love to improve
I have successfully installed a fresh copy of Mountain Lion which I purchased from the apple store and was able to install it on my system which is as follows:
Intel DH67BL; Details of which can be found at the link below:
Intel® Desktop Board DH67BL
Kingston Ram 6GB
ATI Radeon 5850 1GB Graphic card
Seagate 500 GB HD
Core i5 2500K Second Generation processor
Pre&Post Installation Procedure:
I used the same guide as shown in the link below to prepare my USB Flash drive & also followed the same steps listed in section 4 of the guide for post installation process; the guide's link is as below:
tonymacx86.com - UniBeast 1.5: Install OS X Mountain Lion on Any Supported Intel-based PC
The settings i used/selected in multi-beast 4.6.1 are:
* Easybeast install
* System utilities > Repair permissions
* Audio > NON-DSDT HDAEnabler > ALC 892
* Disk > 3rd party SATA & JMicron 36x SATA
* My graphic card worked/was detected out of the box (WOW!)
* Misc > EVOREBOOT & FAKE SMC & FAKE SMC PLUGIN & NullCPUpowerManagement & PS/2 keyboard/mice
* Network > hnak's AppleintelE1000 Ethernet
These are all settings i did using multi beast, and was able to get everything working. everything works.
My GeekBench score on intel 32-bit settings is 8599
Thank you TonyMacx86 community
P.S. Please i'd also like to know if i did something wrong, or could i have done something even better or do let me know if i missed something here. I'd love to improve