Contribute
Register

[GUIDE] Installation on Intel DH67BL Motherboard, ATI 5850 GFX Everything working!

Status
Not open for further replies.
I update specification in my profile.
And here I attached my COLVER.zip file.

This config.plist is for HD3000. You have HD2000 (which is not compatible with HD3000). You will need to disable/remove the graphics related injections in the plist, or get a CPU that does have HD3000.
 
This config.plist is for HD3000. You have HD2000 (which is not compatible with HD3000). You will need to disable/remove the graphics related injections in the plist, or get a CPU that does have HD3000.


Ya... I don't have CPU other than HD2000 so I try to remove graphics related injection but I can't.. Here I upload two snap of config file in which "config.plist" is our actual DH67BL related plist file and "config_Old.plist" is default plist file which clover created. But in both file graphics related setting are looking same.. So how can I disable/remove the graphics injections. Please can you provide me config.plist file?
 

Attachments

  • Screen Shot 2017-05-05 at 9.42.43 PM.png
    Screen Shot 2017-05-05 at 9.42.43 PM.png
    230.3 KB · Views: 102
  • Screen Shot 2017-05-05 at 9.43.08 PM.png
    Screen Shot 2017-05-05 at 9.43.08 PM.png
    253.9 KB · Views: 123
Ya... I don't have CPU other than HD2000 so I try to remove graphics related injection but I can't.. Here I upload two snap of config file in which "config.plist" is our actual DH67BL related plist file and "config_Old.plist" is default plist file which clover created. But in both file graphics related setting are looking same.. So how can I disable/remove the graphics injections. Please can you provide me config.plist file?

Check under /Devices/FakeID/IntelGFX.
 
Check under /Devices/FakeID/IntelGFX.

Thanks for guide me.
I tried to remove value under /Devices/FakeID/IntelGFX. but both plist file look like same. I found H3000 values in attributes, so over there I remove that value. So is this proper or not? Please push me little more.. I upload snap of that..
 

Attachments

  • Screen Shot 2017-05-06 at 11.34.22 PM.png
    Screen Shot 2017-05-06 at 11.34.22 PM.png
    242.3 KB · Views: 134
  • Screen Shot 2017-05-06 at 11.34.44 PM.png
    Screen Shot 2017-05-06 at 11.34.44 PM.png
    265.7 KB · Views: 105
  • Screen Shot 2017-05-06 at 11.36.52 PM.png
    Screen Shot 2017-05-06 at 11.36.52 PM.png
    44.4 KB · Views: 112
  • Screen Shot 2017-05-06 at 11.36.34 PM.png
    Screen Shot 2017-05-06 at 11.36.34 PM.png
    45.4 KB · Views: 124
Thanks for guide me.
I tried to remove value under /Devices/FakeID/IntelGFX. but both plist file look like same. I found H3000 values in attributes, so over there I remove that value. So is this proper or not? Please push me little more.. I upload snap of that..

Yes... fake device-id can also be injected via AddProperties...
You should remove the fake device-id inject since you don't have HD3000.
 
Status
Not open for further replies.
Back
Top