[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

[Feartech]

for bluetooth, add the following? ...(from previous test 10.14.6 but different clover, current clover is 4701 rm version)

yes

 

[appleiscool]

tested new clean install 10.13.6 osx high sierra , clover 4701 rm verion, all worked as per guide
imo HFS+ is much faster than apfs

post install , installed the 2x 2020 security updates
bootup is very slow. verbose said
appleALCU.kext conflict , the way it was integrated as part for lilufriends.kext failed to load

removed appleALCU.kext from /L/E
boot up was no delays , quick

but no bluetooth. the icon has the zig zag through it
how to fix?

Download Security Update 2020-005 (High Sierra) - Apple Support

Security Update 2020-005 is recommended for all users and improves the security of macOS.

support.apple.com

Security Update 2020-006 (High Sierra) - Apple Support

Security Update 2020-006 is recommended for all users and improves the security of macOS.

support.apple.com

update.

maybe solved - post install order.

follow Rehabmans guide


before everything else

prepare customised config.plist , choose smbios for your system, eg MacBookPro11,1

use clover configurator to add in all the details, bios etc

post install,

install clover 4701 rm version to hdd or sdd

optional. add firewall vpn ntfs fuse etc

install silentknight

SilentKnight, Skint, silnite, LockRattler, SystHist & Scrub

Skint – a watchful eye on security settings Updated! Checks key security settings and features including SIP, SSV, Gatekeeper, XProtect, XProtect Remediator and macOS security updates. Runs a…

eclecticlight.co

run silentknight , get smaller updates and install only
safari itunes mrt etc

do not install the big security updates yet

reboot

continue with post install guide

 

[Feartech]

update.

maybe solved - post install order.

follow Rehabmans guide


before everything else

prepare customised config.plist , choose smbios for your system, eg MacBookPro11,1

use clover configurator to add in all the details, bios etc

post install,

install clover 4701 rm version to hdd or sdd

optional. add firewall vpn ntfs fuse etc

install silentknight

SilentKnight, Skint, silnite, LockRattler, SystHist & Scrub

Skint – a watchful eye on security settings Updated! Checks key security settings and features including SIP, SSV, Gatekeeper, XProtect, XProtect Remediator and macOS security updates. Runs a…

eclecticlight.co

run silentknight , get smaller updates and install only
safari itunes mrt etc

do not install the big security updates yet

reboot

continue with post install guide

be careful with clover configurator as that can cause issues in corrupted config.plist's if not done correctly

 

[appleiscool]

update.

maybe solved - post install order.

follow Rehabmans guide


before everything else

prepare customised config.plist , choose smbios for your system, eg MacBookPro11,1

use clover configurator to add in all the details, bios etc

post install,

install clover 4701 rm version to hdd or sdd

optional. add firewall vpn ntfs fuse etc

install silentknight

SilentKnight, Skint, silnite, LockRattler, SystHist & Scrub

Skint – a watchful eye on security settings Updated! Checks key security settings and features including SIP, SSV, Gatekeeper, XProtect, XProtect Remediator and macOS security updates. Runs a…

eclecticlight.co

run silentknight , get smaller updates and install only
safari itunes mrt etc

do not install the big security updates yet

reboot

continue with post install guide

update. temp solved audio

change order. install big updates 1st.

installed little snitch , the part where it was "updating boot cache" fixed whatever was causing the applealcu not to load and versbose says probable nnennory leek

tested shutdown startups

100% works 8x0g1 maybe different for other laptop configs, but --> must run rehabmans post install script after each boot up, brings back the audio icon and audio works etc.
else no audio.




possible solution.
make all references to applealc and especially applealcu to start finish before applehda in the boot up
dummies proof how to?

sudo kextstat output
shows
applealc at index 21,
applealcu at index 146

applehdacontroller at index 122

Installation and usage

Native macOS HD audio for not officially supported codecs - acidanthera/AppleALC

github.com

How to use AppleALC​

The only task you need to accomplish if your codec is supported is to load the kernel extension and see if it works. You can use your bootloader for that but remember to load AppleALC earlier than AppleHDA (see sudo kextstat output for more detail).


Note that Lilu must also be present for AppleALC to work.

 

[Feartech]

update. temp solved audio

change order. install big updates 1st.

installed little snitch , the part where it was "updating boot cache" fixed whatever was causing the applealcu not to load and versbose says probable nnennory leek

tested shutdown startups

100% works 8x0g1 maybe different for other laptop configs, but --> must run rehabmans post install script after each boot up, brings back the audio icon and audio works etc.
else no audio.

some one know better?

remove AppleALCU.kext it is not required for your hardware

 

[appleiscool]

agree forgot to copy paste from dummy config to actual config

be careful with clover configurator as that can cause issues in corrupted config.plist's if not done correctly

 

[appleiscool]

remove AppleALCU.kext it is not required for your hardware

thanks

maybe usb external digital audio hardware might need it

 

[appleiscool]

update. temp solved audio

change order. install big updates 1st.

installed little snitch , the part where it was "updating boot cache" fixed whatever was causing the applealcu not to load and versbose says probable nnennory leek

tested shutdown startups

100% works 8x0g1 maybe different for other laptop configs, but --> must run rehabmans post install script after each boot up, brings back the audio icon and audio works etc.
else no audio.




possible solution.
make all references to applealc and especially applealcu to start finish before applehda in the boot up
dummies proof how to?

sudo kextstat output
shows
applealc at index 21,
applealcu at index 146

applehdacontroller at index 122

Installation and usage

Native macOS HD audio for not officially supported codecs - acidanthera/AppleALC

github.com

How to use AppleALC​

The only task you need to accomplish if your codec is supported is to load the kernel extension and see if it works. You can use your bootloader for that but remember to load AppleALC earlier than AppleHDA (see sudo kextstat output for more detail).


Note that Lilu must also be present for AppleALC to work.

update - for better audio sound

use the newest current applealc kext.

 

[ian6267]

update - for better audio sound

use the newest current applealc kext.

I used to use little snitch but it can cause some real problems, consider trying Lulu

 

[appleiscool]

I used to use little snitch but it can cause some real problems, consider trying Lulu

thanks, looks different. making fw rules isnt dummies proof eg only allow browser to browse on port 443 vs blocking the whole internet.

maybe setup a test mac to install all the other apps to check out the the bells and whistles or silence