[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

[RehabMan]

I Still Got Error
FYI if I used AptionMemoryFix-64 I got error prelinked kernel..when I removed it, and replace it to OsxAptioFixDrv-64.efi it boot fine..but I got kernel panic at ACPI Smart Battery.

I'm not sure what you installed to cause incompatibility with AptioMemoryFix*.efi (using it here on my 4540s just fine).
It is clear you didn't follow the instructions in the guide.
Try safe mode.

 

[RehabMan]

I am sure.One thing, i dunno if it will help but, when I force restart by pressing power button for a time, sometimes brightness works...but upon restarting it stops working. I am really frustrated...

What do you see in SysPrefs->Displays?

 

[RehabMan]

HP 4530s, 10.13.6.
Trying to update kexts and patches, ran commands as described in "Major update" section of the guide.
And having this:

installing kexts/AppleBacklightInjector.kext to /Library/Extensions
installing kexts/SATA-unsupported.kext to /Library/Extensions
installing kexts/XHCI-300-series-injector.kext to /Library/Extensions
installing kexts/HSSDBlockStorage.kext to /Library/Extensions
installing kexts/JMB38X.kext to /Library/Extensions
installing kexts/JMicronATA.kext to /Library/Extensions
installing kexts/ProBookAtheros.kext to /Library/Extensions
Creating AppleHDA_ProBook_Resources (zml.zlib files)...Cannot parse a NULL or zero-length data
Error Reading File: /tmp/rm_Platforms.plist
Cannot parse a NULL or zero-length data
Error Reading File: /tmp/rm_Platforms.plist
Done
usage: cp [-R [-H | -L | -P]] [-fi | -n] [-apvXc] source_file target_file
cp [-R [-H | -L | -P]] [-fi | -n] [-apvXc] source_file ... target_directory
tag: The file “AppleHDA.kext” couldn’t be opened because there is no such file.

As there is no AppleHDA kext - I got no sound. Never had such an error before, is there a way to fix it?

Make sure you update to the latest repo.
If you have damaged/modified the files in probook.git, re-clone:

cd ~/Projects
rm -Rf probook.git
git clone https://github.com/RehabMan/HP-ProBook-4x30s-DSDT-Patch.git probook.git

 

[RehabMan]

#2972


Problem Reporting files

The 4530s built-in BT is at HP16.

 

[RehabMan]

Tried EC and network reset yet still same problem. What can i do please?

Is my wifi card supported by mojave ?

Try fresh install to separate partition.

 

[Cloudmaker]

Make sure you update to the latest repo.
If you have damaged/modified the files in probook.git, re-clone:

Re-cloned, same error:
Creating AppleHDA_ProBook_Resources (zml.zlib files)...Cannot parse a NULL or zero-length data
Error Reading File: /tmp/rm_Platforms.plist
Cannot parse a NULL or zero-length data
Error Reading File: /tmp/rm_Platforms.plist
Done
usage: cp [-R [-H | -L | -P]] [-fi | -n] [-apvXc] source_file target_file
cp [-R [-H | -L | -P]] [-fi | -n] [-apvXc] source_file ... target_directory
tag: The file “AppleHDA.kext” couldn’t be opened because there is no such file.

Maybe it's time to switch to AppleACL branch? Should I change anything e.g. config.plist or just switch to appleacl branch and run DSDT/SSDT re-patch as described in "Major updates"section?

 

[RehabMan]

Re-cloned, same error:
Creating AppleHDA_ProBook_Resources (zml.zlib files)...Cannot parse a NULL or zero-length data
Error Reading File: /tmp/rm_Platforms.plist
Cannot parse a NULL or zero-length data
Error Reading File: /tmp/rm_Platforms.plist
Done
usage: cp [-R [-H | -L | -P]] [-fi | -n] [-apvXc] source_file target_file
cp [-R [-H | -L | -P]] [-fi | -n] [-apvXc] source_file ... target_directory
tag: The file “AppleHDA.kext” couldn’t be opened because there is no such file.

Maybe it's time to switch to AppleACL branch? Should I change anything e.g. config.plist or just switch to appleacl branch and run DSDT/SSDT re-patch as described in "Major updates"section?

What is output of:

ls -l /tmp

 

[Cloudmaker]

What is output of:

ls -l /tmp

lrwxr-xr-x@ 1 root wheel 11 Dec 16 2017 /tmp -> private/tmp

 

[RehabMan]

lrwxr-xr-x@ 1 root wheel 11 Dec 16 2017 /tmp -> private/tmp

Re-cloned, same error:
Creating AppleHDA_ProBook_Resources (zml.zlib files)...Cannot parse a NULL or zero-length data
Error Reading File: /tmp/rm_Platforms.plist
Cannot parse a NULL or zero-length data
Error Reading File: /tmp/rm_Platforms.plist
Done
usage: cp [-R [-H | -L | -P]] [-fi | -n] [-apvXc] source_file target_file
cp [-R [-H | -L | -P]] [-fi | -n] [-apvXc] source_file ... target_directory
tag: The file “AppleHDA.kext” couldn’t be opened because there is no such file.

Maybe it's time to switch to AppleACL branch? Should I change anything e.g. config.plist or just switch to appleacl branch and run DSDT/SSDT re-patch as described in "Major updates"section?

My guess is you deleted AppleHDA.kext.
Run the macOS installer to restore.

 

[Cloudmaker]

My guess is you deleted AppleHDA.kext.
Run the macOS installer to restore.

Can I get a vanilla one from another hackintosh installation of 10.13.6? And then just install it to S/L/E on 4530s?