Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch

Status
Not open for further replies.
RehabMan said:
"Problem Reporting" files are incomplete (no verbose boot photo).
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/

Also, your profile is missing important details (screen resolution). Please fix as per FAQ.
Click to expand...

Hi RehabMan,
I have just editted my previous post with addition the screenshot of booting process in verbose mode. I hope this is enough information for your support!

Thank you very much!
 
RehabMan said:
SATA-100-series-unsupported.kext is missing from Clover/kexts/Other.
EmuVariableUefi-64.efi is missing from Clover/drivers64UEFI.
Read the guide carefully:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/
Click to expand...

Hello RehabMan,
Thanks for your very-quick reply,
I have added EmuVariableUefi-64.efi and SATA-100-series-unsupported.kext as you suggessted. However, the boot process of installer still stucks at Apple logo (as same before adding the new files).

Do I still omit another files, or my PLIST file wrong?
Please give me further help.

Thank you very much!
 
zvtrung said:
Hello RehabMan,
Thanks for your very-quick reply,
I have added EmuVariableUefi-64.efi and SATA-100-series-unsupported.kext as you suggessted. However, the boot process of installer still stucks at Apple logo (as same before adding the new files).

Do I still omit another files, or my PLIST file wrong?
Please give me further help.

Thank you very much!
Click to expand...

No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
 

Attachments

  • CLOVER.zip
    1.9 MB · Views: 61
  • IMG_1929.JPG
    IMG_1929.JPG
    3.1 MB · Views: 74
RehabMan said:
No idea what you mean...
You might need to experiment with your TV settings.
Note also that you haven't patched the connector-type for HDMI (your ioreg shows connector-type=DP <00 04 00 00> instead of HDMI <00 08 00 00>. Is it changing when you plug in the TV?

Also, please test your USB type-C port and the HDMI port.
I'd like to know which port can be swapped out for the 0105 in 0x591b0000.
Since 0x591b0000 has only 0204/0306, not 0105 and 0x59160000 has only 0105/0204, not 0306...



WiFi hardware recommendations are in the FAQ and in post #1 this guide.

https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Click to expand...

Sorry can't find way to change this value of connector type in cover config.plist. could you help me?
Looking ioreg i think that framebuffer that need fix is 0105.
Thanks
 
Last edited:
zell180 said:
Sorry can't find way to change this value of connector type in cover config.plist. could you help me?
Looking ioreg i think that framebuffer that need fix is 0105.
Thanks
Click to expand...

I already made the necessary changes for 0x591b0000 in the github project.
Please try current github content.
Report back with problem reporting files.
 
oceanfou said:
hi
Mobo: HP PROBOOK 650 G1
CPU: i5-4200M/HM87
Graphics: HD 4600 , 1920 x 1080

DisplaypPort don't word eny hellp ? thank you
Click to expand...



can you PLZ answer me ?
 
RehabMan said:
I already made the necessary changes for 0x591b0000 in the github project.
Please try current github content.
Report back with problem reporting files.
Click to expand...
hi,
i've updated repo, and install again config.plist and ssdt but nothing change, i send to you report and photo of external monitor. It's like aspect ratio is not correct. For example dock is "cutted"
 

Attachments

  • debug_30780.zip
    2.3 MB · Views: 78
  • screen.jpeg
    screen.jpeg
    216.8 KB · Views: 80
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top