Contribute
Register

[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

Status
Not open for further replies.
RehabMan said:
And read at this thread to understand latest changes for CX8200:
Click to expand...

Hello,
I've tried install_download.sh again. Also I removed OsxAptioFix2Drv-64.efi.

Now it's switching to linein but sound from external mic has huge amount of noise. Looks like wrong pins configuration or not properly configured layout. I tried modify config.plist at clover folder, to use another layouts (0,1,20) but without success.

I've found some project on github. https://github.com/vit9696/AppleALC

is it possible to try this on your config?
 
smoomrik said:
Hello,
I've tried install_download.sh again. Also I removed OsxAptioFix2Drv-64.efi.

Now it's switching to linein but sound from external mic has huge amount of noise. Looks like wrong pins configuration or not properly configured layout. I tried modify config.plist at clover folder, to use another layouts (0,1,20) but without success.

I've found some project on github. https://github.com/vit9696/AppleALC

is it possible to try this on your config?
Click to expand...

Make sure you also have correct ACPI content, correct config.plist content.
(as per post #1 instructions)

And read at this thread to understand latest changes for CX8200:
https://www.tonymacx86.com/threads/hp-430-g4-volume-control-problem.239391/

(eg. wern may have some ideas for you... the current audio setup for CX8200 comes directly from that thread)
 
RehabMan said:
(eg. wern may have some ideas for you... the current audio setup for CX8200 comes directly from that thread)
Click to expand...

Thanks, I'll continue there.
 
Hi Rehabman,

My situation:
Laptop connect on dock. External screen attached on dock by DP port. MacOS version is 10.12.6

Problem:
With the laptop lid closed.
1)System's automatic sleep always turn to shut down. if I use Apple->Sleep, it works very well.
2)System can't turn on. it boots loop. While with the laptop lid open, system turn on without any problem.

The problem that listed above didn't appear when I use Yosemite.
Thanks for your effort to add dock support.
 
gaoqi7 said:
Hi Rehabman,

My situation:
Laptop connect on dock. External screen attached on dock by DP port. MacOS version is 10.12.6

Problem:
With the laptop lid closed.
1)System's automatic sleep always turn to shut down. if I use Apple->Sleep, it works very well.
2)System can't turn on. it boots loop. While with the laptop lid open, system turn on without any problem.

The problem that listed above didn't appear when I use Yosemite.
Thanks for your effort to add dock support.
Click to expand...


No "Problem Reporting" files attached.
Read FAQ, "Problem Reporting" again. Carefully. Attach all requested files/output.
https://www.tonymacx86.com/threads/faq-read-first-laptop-frequent-questions.164990/
Use the gen_debug.sh tool mentioned in the FAQ, that way it is less likely you'll omit something.
 

Attachments

  • debug_21818.zip
    2.5 MB · Views: 70
gaoqi7 said:
...
Click to expand...

You might try this patch:
Comment: 0105 port as DP, 0x04260000
Find: 01 05 09 00 04 00 00 00 04 00 00 00
Replace: 01 05 09 00 00 04 00 00 04 00 00 00
Name: com.apple.driver.AppleIntelFramebufferAzul
 
RehabMan said:
You might try this patch:
Comment: 0105 port as DP, 0x04260000
Find: 01 05 09 00 04 00 00 00 04 00 00 00
Replace: 01 05 09 00 00 04 00 00 04 00 00 00
Name: com.apple.driver.AppleIntelFramebufferAzul
Click to expand...
Hi , after using the patch, with the lid closed, automatic sleep work. for the boot loop issue, not lucky. But it is fine. I don't turn down often.
 

Attachments

  • debug_5957.zip
    1.7 MB · Views: 59
Last edited:
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top