[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

[tert777]

Are you installing Windows to the same device as OS X/Clover or are you installing to a separate device?
You will need to provide details on what you're doing.

HDD absolutely clean. In a laptop hard drive. Sections created in the installer windows and using diskpart, made clean, clean all. Already lost count how many times repartition the disk.

 

[RehabMan]

HDD absolutely clean. In a laptop hard drive. Sections created in the installer windows and using diskpart, made clean, clean all. Already lost count how many times repartition the disk.

Do CMOS reset.
Make sure only Windows HDD is connected at the time of Windows install.
Make sure it is installed to the main SATA bay.

 

[tert777]

Do CMOS reset.
Make sure only Windows HDD is connected at the time of Windows install.
Make sure it is installed to the main SATA bay.

CMOS reset. The battery pull?
Make sure only Windows HDD is connected at the time of Windows install?
It seems mainly HDD bay is. How to buy a laptop do not touched, only the memory bar added.

 

[RehabMan]

CMOS reset. The battery pull?

Yes. CMOS battery is separate from main battery. Read HP maintenance guide.

Make sure only Windows HDD is connected at the time of Windows install?

Yes (thought it was clear the first time I wrote it).

It seems mainly HDD bay is. How to buy a laptop do not touched, only the memory bar added.

No question there. Not sure what you mean by those "statements".

 

[tert777]

Yes. CMOS battery is separate from main battery. Read HP maintenance guide.



Yes (thought it was clear the first time I wrote it).



No question there. Not sure what you mean by those "statements".

As always, thank you very much RehabMan. But CMOS will not do, I do not want to disassemble and sort at the same time resets all serial numbers from memory.

 

[thedeazy]

Hi Rehabman,

I've followed the guide for a HP 650 G1 with; intel i5-4201m ( HD4600 ) - 4GB RAM

Whenever I plug in or unplug into the DP port, I'm getting a kernel panic which mentions something about :

Kernel Extensions in backtrace:
com.apple.driver.AppleIntelFramebufferAzul(10.2.2)[0933AECE-06BD-33F0-AC6A-A503F9E58B1A]@0xffffff7f82c3b000->0xffffff7f82d8cfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[57960DC6-4099-31BC-9B47-52CD647779C7]@0xffffff7f80bd2000
dependency: com.apple.iokit.IOACPIFamily(1.4)[4F7FB6AD-2498-3F71-827C-ED7AA4BF2511]@0xffffff7f80b9d000
dependency: com.apple.iokit.IOAcceleratorFamily2(289.32)[0CA5D0A6-31F0-3363-96B9-3949EE614A0C]@0xffffff7f82aed000
dependency: com.apple.iokit.IOReportFamily(31)[B14DC3D3-7250-3DA3-BF50-C666EBEDAF4C]@0xffffff7f80b96000
dependency: com.apple.AppleGraphicsDeviceControl(3.13.79)[4F255E11-5291-3923-B43C-FE85E5060898]@0xffffff7f82c2f000
dependency: com.apple.iokit.IOGraphicsFamily(513.1)[578F9D07-96F4-3F09-A6A6-047F257CB3BA]@0xffffff7f80f33000

I've tried searching the forums but can't really make sense out of what I've read so I've attached problem reporting files.
( thanks in advance )

 

[RehabMan]

As always, thank you very much RehabMan. But CMOS will not do, I do not want to disassemble and sort at the same time resets all serial numbers from memory.

No idea what you're referring to.

 

[RehabMan]

Hi Rehabman,

I've followed the guide for a HP 650 G1 with; intel i5-4201m ( HD4600 ) - 4GB RAM

Whenever I plug in or unplug into the DP port, I'm getting a kernel panic which mentions something about :

Kernel Extensions in backtrace:
com.apple.driver.AppleIntelFramebufferAzul(10.2.2)[0933AECE-06BD-33F0-AC6A-A503F9E58B1A]@0xffffff7f82c3b000->0xffffff7f82d8cfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[57960DC6-4099-31BC-9B47-52CD647779C7]@0xffffff7f80bd2000
dependency: com.apple.iokit.IOACPIFamily(1.4)[4F7FB6AD-2498-3F71-827C-ED7AA4BF2511]@0xffffff7f80b9d000
dependency: com.apple.iokit.IOAcceleratorFamily2(289.32)[0CA5D0A6-31F0-3363-96B9-3949EE614A0C]@0xffffff7f82aed000
dependency: com.apple.iokit.IOReportFamily(31)[B14DC3D3-7250-3DA3-BF50-C666EBEDAF4C]@0xffffff7f80b96000
dependency: com.apple.AppleGraphicsDeviceControl(3.13.79)[4F255E11-5291-3923-B43C-FE85E5060898]@0xffffff7f82c2f000
dependency: com.apple.iokit.IOGraphicsFamily(513.1)[578F9D07-96F4-3F09-A6A6-047F257CB3BA]@0xffffff7f80f33000

I've tried searching the forums but can't really make sense out of what I've read so I've attached problem reporting files.
( thanks in advance )

Is CSM/legacy boot enabled in BIOS?
Is DVMT-prealloc set correctly to 32mb?

If so...Try changing the hotplug delay...
You will need one of these two patches in config.plist/KernelAndKextPatches/KextsToPatch:

Comment: HDMI-DP delay change, port 0105(12), 0x0a260005 0x0a260006, 0x0d220003, 0x0a2e000a, 0x0a26000a
Name: com.apple.driver.AppleIntelFramebufferAzul
Find: <01050900 00040000 87000000>
Replace: <01051200 00040000 87000000>

Or the port 0204 patch:
Comment: HDMI-DP delay change, port 0204(12), 0x0a260005 0x0a260006
Name: com.apple.driver.AppleIntelFramebufferAzul
Find: <02040900 00040000 87000000>
Replace: <02041200 00040000 87000000>

 

[thedeazy]

Is CSM/legacy boot enabled in BIOS?
Is DVMT-prealloc set correctly to 32mb?

If so...Try changing the hotplug delay...
You will need one of these two patches in config.plist/KernelAndKextPatches/KextsToPatch:

Comment: HDMI-DP delay change, port 0105(12), 0x0a260005 0x0a260006, 0x0d220003, 0x0a2e000a, 0x0a26000a
Name: com.apple.driver.AppleIntelFramebufferAzul
Find: <01050900 00040000 87000000>
Replace: <01051200 00040000 87000000>

Or the port 0204 patch:
Comment: HDMI-DP delay change, port 0204(12), 0x0a260005 0x0a260006
Name: com.apple.driver.AppleIntelFramebufferAzul
Find: <02040900 00040000 87000000>
Replace: <02041200 00040000 87000000>

Thank you but it doesn't seem to work.

I was wondering, could it be a possibility that I would need an active DP-HDMI cable ? At the moment, I'm using a passive cable but I'm not really sure what that means.

 

[RehabMan]

Thank you but it doesn't seem to work.

No details, no idea.
If you need help, describe the issue clearly and provide "Problem Reporting" files as requested in post #1.