[Guide] HP ProBook/EliteBook/Zbook using Clover UEFI hotpatch (10.11)

[RehabMan]

In Terminal:
Code (Text):

cd ~/Projects/probook.git
./download.sh
./install_downloads.sh

I have wait for one hour...and part of the download time out....and I try again..again...

Sounds like you have a problem with your internet provider.

 

[daniela-sammartino]

You would need to provide "Problem Reporting" files when the audio is not working (of course).
Chances are it is caused by the audio related crapware you installed:
- com.globaldelight.driver.Boom2Device
- com.Perfect.Driver.SystemAudioRecorder

Hi Rehabman, i removed crapware you suggested me, but the problem still appears.

1) using the pc with battery: audio working
2) remove the battery, plug to power supply and turn on the pc: audio not working, need to rebuild cache and restart

Switching from battery /power supply or vice versa, audio disappears.

Attached problem reporting files (audio is not working).
Thank you

 

[RehabMan]

Hi Rehabman, i removed crapware you suggested me, but the problem still appears.

1) using the pc with battery: audio working
2) remove the battery, plug to power supply and turn on the pc: audio not working, need to rebuild cache and restart

Switching from battery /power supply or vice versa, audio disappears.

Attached problem reporting files (audio is not working).
Thank you

Run install_downloads.sh as per guide. Make sure you rebuild cache as recommended in "Known Problems", "Audio".

 

[daniela-sammartino]

Run install_downloads.sh as per guide. Make sure you rebuild cache as recommended in "Known Problems", "Audio".

I did not the cache rebuild because you said "You would need to provide "Problem Reporting" files when the audio is not working (of course)."

 

[Krazy-Killa]

I did not the cache rebuild because you said "You would need to provide "Problem Reporting" files when the audio is not working (of course)."

Please keep in mind that it will take roughly 2 reboots for the Audio to stabilize after you rebuild your cache. Rebuild cache, reboot check that audio works, if not or if it does reboot again anyways and verify audio works, then unplug laptop and check to see if audio continues to work after rebooting on battery.

 

[docsimo85]

Hi guys.
I'm trying to install OS X 10 11 6 on HP 450 G3.
Install was fine, i'm writing from my new book
I've used that guide.
I have only 2 problems:
Audio not working (High definition Intel detected, he just don't make a sound. Tried to rebuild cache like you wrote)
Flickering problem: the book monitor flicker a lot, if i change resolution or refresh rate it stop flickering and I can work)
Laptop specs in my signature
Laptop#1: (Clover) HP Probook 450 G3 (P4P03EAR) , Intel® Core™ i7-6500U , Intel HD520 , RAM 8 GB 1600 Mhz
Any advice?

Other infos:
kextstat|grep -y acpiplat

13 2 0xffffff7f8253a000 0x60000 0x60000 com.apple.driver.AppleACPIPlatform (4.0) A29C7512-D3A8-3AED-9721-3A5FF1A32EB2 <12 11 7 6 5 4 3 1>

docs-Air:RehabMan doc$ kextstat|grep -y appleintelcpu

docs-Air:RehabMan doc$ kextstat|grep -y applelpc

120 0 0xffffff7f825e3000 0x3000 0x3000 com.apple.driver.AppleLPC (3.1) 32BDCF9F-0473-32D4-9DAE-F523EFB2D244 <85 12 5 4 3>

docs-Air:RehabMan doc$ kextstat|grep -y applehda

90 1 0xffffff7f82260000 0x1e000 0x1e000 com.apple.driver.AppleHDAController (274.12) 5F94D8E3-B1E5-35D7-AB7A-6419C3AAC3B5 <89 88 71 12 7 6 5 4 3 1>

118 0 0xffffff7f823cc000 0xb3000 0xb3000 com.apple.driver.AppleHDA (274.12) 436B78B7-FA08-3C53-B97D-5C617CB7EB28 <117 94 90 89 88 71 12 11 6 5 4 3 1>

docs-Air:RehabMan doc$ sudo touch /System/Library/Extensions && sudo kextcache -u /

Password:

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext USBInjectAll.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext RealtekRTL8111.kext

kext file:///Library/Extensions/JMicronATA.kext/ is in hash exception list, allowing to load

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext JMB38X.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IOath3kfrmwr.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IntelBacklight.kext

kext file:///Library/Extensions/HSSDBlockStorage.kext/ is in hash exception list, allowing to load

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_XHCIMux.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HDMI_Audio.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HD_Graphics.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext CodecCommander.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIPoller.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext

kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleHDA.kext

 

[RehabMan]

I did not the cache rebuild because you said "You would need to provide "Problem Reporting" files when the audio is not working (of course)."

Periodic loss of audio after installing software or updating kexts is normal.
Required fix is in post #1 under "Known Problems" "Audio".

 

[RehabMan]

Hi guys.
I'm trying to install OS X 10 11 6 on HP 450 G3.
Install was fine, i'm writing from my new book
I've used that guide.
I have only 2 problems:
Audio not working (High definition Intel detected, he just don't make a sound. Tried to rebuild cache like you wrote)
Flickering problem: the book monitor flicker a lot, if i change resolution or refresh rate it stop flickering and I can work)
Laptop specs in my signature
Laptop#1: (Clover) HP Probook 450 G3 (P4P03EAR) , Intel® Core™ i7-6500U , Intel HD520 , RAM 8 GB 1600 Mhz
Any advice?

Other infos:
kextstat|grep -y acpiplat

13 2 0xffffff7f8253a000 0x60000 0x60000 com.apple.driver.AppleACPIPlatform (4.0) A29C7512-D3A8-3AED-9721-3A5FF1A32EB2 <12 11 7 6 5 4 3 1>

docs-Air:RehabMan doc$ kextstat|grep -y appleintelcpu

docs-Air:RehabMan doc$ kextstat|grep -y applelpc

120 0 0xffffff7f825e3000 0x3000 0x3000 com.apple.driver.AppleLPC (3.1) 32BDCF9F-0473-32D4-9DAE-F523EFB2D244 <85 12 5 4 3>

docs-Air:RehabMan doc$ kextstat|grep -y applehda

90 1 0xffffff7f82260000 0x1e000 0x1e000 com.apple.driver.AppleHDAController (274.12) 5F94D8E3-B1E5-35D7-AB7A-6419C3AAC3B5 <89 88 71 12 7 6 5 4 3 1>

118 0 0xffffff7f823cc000 0xb3000 0xb3000 com.apple.driver.AppleHDA (274.12) 436B78B7-FA08-3C53-B97D-5C617CB7EB28 <117 94 90 89 88 71 12 11 6 5 4 3 1>

docs-Air:RehabMan doc$ sudo touch /System/Library/Extensions && sudo kextcache -u /

Password:

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Trackpad.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Mouse.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Keyboard.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext VoodooPS2Controller.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext USBInjectAll.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext RealtekRTL8111.kext

kext file:///Library/Extensions/JMicronATA.kext/ is in hash exception list, allowing to load

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext JMB38X.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IOath3kfrmwr.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext IntelBacklight.kext

kext file:///Library/Extensions/HSSDBlockStorage.kext/ is in hash exception list, allowing to load

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakeSMC.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_XHCIMux.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HDMI_Audio.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID_Intel_HD_Graphics.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext FakePCIID.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext CodecCommander.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIPoller.kext

kext-dev-mode allowing invalid signature -67062 0xFFFFFFFFFFFEFA0A for kext ACPIBatteryManager.kext

kext-dev-mode allowing invalid signature -67054 0xFFFFFFFFFFFEFA12 for kext AppleHDA.kext

Read post #1, "Problem Reporting".

 

[the_chiefgeek]

Your EFI/Clover content is not up-to-date with respect to the github project.

Can you be more specific? I copied all the SSDT files, what did I miss? Do I need to replace the config.plist each time I upgrade too? If so where should I be putting MLB, ROM, etc stuff now?

 

[the_chiefgeek]

Can you be more specific? I copied all the SSDT files, what did I miss? Do I need to replace the config.plist each time I upgrade too? If so where should I be putting MLB, ROM, etc stuff now?

Ok. I patched my config.plist with changes from the latest version and battery percentage works fine.

Now the question of the day, my iMessage/iCloud quit working a month or so ago so I was trying to make sure my MLB,ROM, serial etc were set correctly so I added the new values to config.plist. While it works, it makes taking updates a little more difficult.

How do you recommend setting MLB,ROM,etc values?