Mate, I followed the guide. Please see post 214.
You did not. This EFI/CLOVER has the same problems already identified.
It is an EFI/Clover that seems intended for HDD (final setup), and it is wrong (you have patched DSDT.aml and SSDT-1.aml in ACPI/patched).
For final EFI/Clover setup, the only files in ACPI/patched should be:
<
SSDTs from the repo
appropriate for your hardware >
SSDT.aml (from ssdtPRgen.sh)
Your profile is not filled out as requested in the guide, so I have no idea which screen you have. You should be certain you're using the correct files for your hardware.
The files you have, which don't belong:
DSDT_origin.dsl
DSDT.aml
DSDT.dsl
SSDT-1.aml
Also, the kext sin EFI/Clover/kexts/10.11 are wrong. You should have only:
FakeSMC.kext
RealtekRTL8111.kext
VoodooPS2Controller.kext
A few kexts are optional:
ProBookAtheros.kext
FakePCIID.kext
FakePCIID_Broadcom_WiFi.kext
Note: You have FakePCIID_Broadcom_WiFi.kext, but no FakePCIID.kext. FakePCIID_Broadcom_WiFi.kext does not work without FakePCIID.kext.
You claim you're trying to reach the installer via USB. You should have an EFI/Clover that is setup as described in the main guide. There should be no files in ACPI/patched, and you should be using a different config.plist (as linked from the main guide).
The files you provide here do not correlate with what you say you're doing. Seems like you have some file management issues to sort out.