Contribute
Register

[Guide] HP Envy Haswell series J/K/Q/N using Clover UEFI (10.11)

Status
Not open for further replies.
[Guide] HP Envy Haswell series J/K using Clover UEFI (10.11)

Also I can't repatch DSDT now..
Boot from usb, repositories up to date, using latest config, did cleanallex.
./disassembly.sh aborted in the end and no result in unpatched.
Code: 
[FONT=Menlo]Acpi table [SSDT] successfully installed and loaded[/FONT][FONT=Menlo]Pass 1 parse of [SSDT][/FONT]
[FONT=Menlo]Pass 2 parse of [SSDT][/FONT]
[FONT=Menlo]Loading Acpi table from file SSDT-1.aml - Length 00001337 (000539)[/FONT]
[FONT=Menlo]ACPI: SSDT 0x0000000000000000 000539 (v01 HPQOEM 1967     00003000 INTL 00040000)[/FONT]
[FONT=Menlo]Acpi table [SSDT] successfully installed and loaded[/FONT]
[FONT=Menlo]Pass 1 parse of [SSDT][/FONT]
[FONT=Menlo]ACPI Error: [_PPC] Namespace lookup failure, AE_ALREADY_EXISTS (20141107/dswload-451)[/FONT]
[FONT=Menlo]ACPI Exception: AE_ALREADY_EXISTS, During name lookup/catalog (20141107/psobject-305)[/FONT]
[FONT=Menlo]Could not parse external ACPI tables, AE_ALREADY_EXISTS[/FONT]
[FONT=Menlo]mv: rename *.dsl to ../unpatched/*.dsl: No such file or directory[/FONT]
 
[Guide] HP Envy Haswell series J/K using Clover UEFI (10.11)

ok, got sound!
My problem was missing 3 dicts in kextsToPatch section in config.plist for AppleHDA.

Approach i've mentioned above (another injection kext) will not work on El Capitan. After update to 10.11.1 I couldn't boot (stopped at sound assertion).

Note: as in El Capitan repair disk permissions is not available anymore, maybe comment in the guide that repair permissions only for 10.10.

Problem with repatching dsdt still present.
 
[Guide] HP Envy Haswell series J/K using Clover UEFI (10.11)

RehabMan said:
Boot verbose, show photo. Post EFI/Clover folder you're using.
Click to expand...

ive attached my clover folder
i couldnt get a photo because ive tried screenshotting the error multiple times, my laptop just restarts
its something to do with osxaptiofixdrv.. thats what comes up in verbose mode, i recently went online and downloaded osxaptiofixdrv-64 and replaced the old one.. maybe that could be the problem?
 

Attachments

  • CLOVER.zip
    4.7 MB · Views: 153
Desktop
GA-Z97MX-GAMING 5 |  i5 4690K |  GeForce GTX 970
[Guide] HP Envy Haswell series J/K using Clover UEFI (10.11)

1mperial said:
I know about this section and already tried. No result.
Click to expand...

Read post #1, "Problem Reporting".
 
[Guide] HP Envy Haswell series J/K using Clover UEFI (10.11)

1mperial said:
..
Problem with repatching dsdt still present.
Click to expand...

Compress ~/Projects/envy.git as ZIP. Attach to reply (you can remove 'downloads' before creating the ZIP).
 
[Guide] HP Envy Haswell series J/K using Clover UEFI (10.11)

achoucair said:
ive attached my clover folder
i couldnt get a photo because ive tried screenshotting the error multiple times, my laptop just restarts
its something to do with osxaptiofixdrv.. thats what comes up in verbose mode, i recently went online and downloaded osxaptiofixdrv-64 and replaced the old one.. maybe that could be the problem?
Click to expand...

Remove EFI/Clover/kexts/Other/BrcmPatchRAM.kext.

Use OsxAptioFixDrv-64.efi that comes from the current Clover installer.

Your config.plist is not up-to-date with respect to the repo.
 
Last edited by a moderator:
[Guide] HP Envy Haswell series J/K using Clover UEFI (10.11)

RehabMan said:
Your USB was not prepared according to the guide. As a result, the extracted files are incorrect.
Click to expand...
Maybe because I use usb with yosemite?
Anyway i'll create new one and try again
 
[Guide] HP Envy Haswell series J/K using Clover UEFI (10.11)

1mperial said:
Maybe because I use usb with yosemite?
Click to expand...

No -- wrong for Yosemite too.

Anyway i'll create new one and try again
Click to expand...

Follow guide exactly as written.
 
Status
Not open for further replies.
Copyright © 2010 - 2024 tonymacx86 LLC
Back
Top