- Joined
- Jul 6, 2011
- Messages
- 10
- Motherboard
- Gigabyte GA-Z68MA-D2H-B3
- CPU
- i3-2125
- Graphics
- 8800 GTS
- Mac
- Classic Mac
- Mobile Phone
Hey Guys,
Wondering if you guys might be able to help me out as I am at a loss for the install now.
I have been at this for the last couple of days now and I am unable to boot to the desktop.
I have gone through the guide I can not find where I am going wrong. Still have not figured this out. Can any extra pair of eyes tell me what I'm doing wrong? ...(this is all deja vu because I had this problem 7 years ago with this system).
I was up and running on El Capitan just fine and decided to go ahead and upgrade to Sierra. Unfortunately I installed on my previously working boot drive.
The Build:
Mobo: GA-Z68MA-D2H-B3 (Bios U1c)
Processor: Intel Core i3 2125
RAM: Corsair Dual Channel 1600MHz 16GB (4x4GB)
Graphics: NVIDIA GeForce 8800 GTS / Onboard video
HDD: 2TB HD Segate - 256gb SSD
BIOS Settings
-Gigabyte Z68MA-D2H-B3 Bios U1c
-Enable AHCI
-Disable Intel Virtualization Technology
I have gone through and done the following so far.
Install MacOS phase
Step 1 Built a UEFI USB stick using Unibeast
Step 2 Booted with the USB stick
Step 3 Installed MacOS Sierra
It got all the way through the install and on reboot it shows the load progress bar but it stops at at 65%.
Any suggestions?
Wondering if you guys might be able to help me out as I am at a loss for the install now.
I have been at this for the last couple of days now and I am unable to boot to the desktop.
I have gone through the guide I can not find where I am going wrong. Still have not figured this out. Can any extra pair of eyes tell me what I'm doing wrong? ...(this is all deja vu because I had this problem 7 years ago with this system).
I was up and running on El Capitan just fine and decided to go ahead and upgrade to Sierra. Unfortunately I installed on my previously working boot drive.
The Build:
Mobo: GA-Z68MA-D2H-B3 (Bios U1c)
Processor: Intel Core i3 2125
RAM: Corsair Dual Channel 1600MHz 16GB (4x4GB)
Graphics: NVIDIA GeForce 8800 GTS / Onboard video
HDD: 2TB HD Segate - 256gb SSD
BIOS Settings
-Gigabyte Z68MA-D2H-B3 Bios U1c
-Enable AHCI
-Disable Intel Virtualization Technology
I have gone through and done the following so far.
Install MacOS phase
Step 1 Built a UEFI USB stick using Unibeast
Step 2 Booted with the USB stick
Step 3 Installed MacOS Sierra
It got all the way through the install and on reboot it shows the load progress bar but it stops at at 65%.
Any suggestions?