- Joined
- Jul 11, 2012
- Messages
- 637
- Motherboard
- Gigabyte GA Z68XP-UD3
- CPU
- i7 3770
- Graphics
- GT 210
- Mac
- Mobile Phone
i7 3770 Ivy Bridge on GA-Z68XP-UD3 Sandy Bridge
Hi!
I followed your guide meticulously but can't get past stage 3. of the Preflight Checklist, no matter what I tried...
CPU: Intel i7 3770 — Ivy Bridge
Mobo: Gigabyte GA-Z68XP-UD3 (UEFI Bios U1J) — Sandy Bridge with only one physical port (HDMI)
GFX: EVGA GeForce GT210
SMBIOS: I've set Macmini6,1 as recommended by Hackintool.
Scope: make my IGPU ready in case my NVidia GT210 GC dies.
2. Lilu.kext v1.4.9 + WhateverGreen.kext v1.4.4 ok
3.
Devices --> Fake ID --> IntelGFX --> 0x01628086*
Graphics --> Inject Intel --> Checked
Graphics --> ig-platform-id : 0x01620007*
(*= values appearing in Hackintool)
I only get those 2 lines in Hackintool, no details such as QE/CI, etc. as mentioned in the guide:
Hackintool has changed a lot and I don't know for sure how your guide relates to the last versions...
I've tried other ig-platform-id 0x01660000, 5, A and B as mentioned here: https://github.com/acidanthera/What...el-hd-graphics-25004000-ivy-bridge-processors and I always get those two lines and nothing else.
As per those FAQ, I've added PciRoot(0x0)/Pci(0x16,0x0) > device-id 3A1E0000 and put the file SSDT-IMEI.dsl in /EFI/CLOVER/ACPI/patched/ but it doesn't change anything.
Nevertheless, I've tried the rest of your guide with ig-platform-id 0x0166000A (Recommended default), and the indexes are different: it's not -1,1,2,3 but 0,2,3,4...
So before going further and testing the twenty possible combinations of index/BusID, I need to know if what I get at stage 3. is what's expected for my setup?
Thank you.
Hi!
I followed your guide meticulously but can't get past stage 3. of the Preflight Checklist, no matter what I tried...
CPU: Intel i7 3770 — Ivy Bridge
Mobo: Gigabyte GA-Z68XP-UD3 (UEFI Bios U1J) — Sandy Bridge with only one physical port (HDMI)
GFX: EVGA GeForce GT210
SMBIOS: I've set Macmini6,1 as recommended by Hackintool.
Scope: make my IGPU ready in case my NVidia GT210 GC dies.
2. Lilu.kext v1.4.9 + WhateverGreen.kext v1.4.4 ok
3.
Devices --> Fake ID --> IntelGFX --> 0x01628086*
Graphics --> Inject Intel --> Checked
Graphics --> ig-platform-id : 0x01620007*
(*= values appearing in Hackintool)
I only get those 2 lines in Hackintool, no details such as QE/CI, etc. as mentioned in the guide:
Hackintool has changed a lot and I don't know for sure how your guide relates to the last versions...
I've tried other ig-platform-id 0x01660000, 5, A and B as mentioned here: https://github.com/acidanthera/What...el-hd-graphics-25004000-ivy-bridge-processors and I always get those two lines and nothing else.
As per those FAQ, I've added PciRoot(0x0)/Pci(0x16,0x0) > device-id 3A1E0000 and put the file SSDT-IMEI.dsl in /EFI/CLOVER/ACPI/patched/ but it doesn't change anything.
Nevertheless, I've tried the rest of your guide with ig-platform-id 0x0166000A (Recommended default), and the indexes are different: it's not -1,1,2,3 but 0,2,3,4...
So before going further and testing the twenty possible combinations of index/BusID, I need to know if what I get at stage 3. is what's expected for my setup?
Thank you.