- Joined
- Jul 20, 2019
- Messages
- 43
- Motherboard
- Dell XPS 15
- CPU
- i7 7700HQ
- Graphics
- UHD 630 - GTX 1050 (Not recognized by MACOSX)
- Mac
- Mobile Phone
So i upgraded tp 10.14.6 and lost track pad...Anyone know a fix?
So i upgraded tp 10.14.6 and lost track pad...Anyone know a fix?
Updated to 10.14.6 without issue. Updated Clover to r5018 then only had to rebuild kextcache and fix permissions to get track pad back in order.
You can only use 1 of the 3 methods and each has it's quirks
When changing methods, you need to clear nvram possibly multiple times and also shutting down completely helps.
Method 1 (included default)
Using both SSDT-TB3-9560.aml and SSDT-TYPC-9560.aml
Basically a combination/cleanup both below, TB3 not tested or confirmed but USB-C works like PCI Express card
Method 2 (KNNSpeeds original method)
Using only SSDT-TYPC.aml
USB-C should work like a PCI Express card, Thunderbolt should work but no hot plug and system will crash if you unplug while still booted up. Thunderbolt needs to be plugged in at boot with devices on.
Method 3 (https://www.tonymacx86.com/threads/in-progress-ssdt-for-thunderbolt-3-hotplug.248784/)
Using only SSDT-TB3-V1.aml
It's Method 1 at the link.
Hot plug works one device at a time but 9560 users have reported it's flaky.
USB-C doesn't work at all.
3.4 has the correct files and it is down to 2 methods now, my experimental method is not a good idea and there were TB issues.So I wanted to use SSDT-TYPC.aml. I do not have the SSDT-TYPC-9560.aml in my Clover v3.4 Download i only had the SSDT-TYPC.aml file. I placed that in the Clover\ACPI\Patched DIR, but i am not sure what else i need to do to get it to work.
Do i have an older version of the file? Are there any steps that need to be done after placing the file in the patched dir?
Benni thank you for taking some time to help me it is greatly appreciated
Thank you so much blazinsmokey for replying, it is greatly appreciated. So to answer your questions
Yes the Dock works fine in windows
I plug it in before i power on the laptop then turn on the power
I have followed the BIOS settings to a T on the link that you provided on the guide
The Dock is fully updated via Windows.
I . have included my boot.log from Clover if that helps? No mind you that boot.log is from when i am at home with no dock plugged in, not sure that matters.