[Guide] CustoMac 2013 | Z77X-UD5H | i7-3770K | GT 640 x2 | OS X 10.11

[ImacTony]

is your processor OC?

No, I have not yet experimented with overclocking.

 

[laddu]

Is your sleep/wake working after 10.11.2 update ?

 

[ImacTony]

Is your sleep/wake working after 10.11.2 update ?

Mine hasn't worked since I updated from ML to Yosemite (I skipped Mavericks). No go on El Capitan also. It would sleep for a few seconds, waken, repeat, as described on various posts on the site. Since then, I set my Computer Sleep in Energy Preferences to "Never" and set the DISPLAY to sleep at some short interval. The DISPLAY sleep works fine.

I have a Roswell SD Card /USB Expansion Hub and a few posts indicate that is the problem.

 

[bulibasha75]

Why the files from post install folder EFI are going to kexts " other " folder and not into 10.11 folder ?

 

[bulibasha75]

Is your sleep/wake working after 10.11.2 update ?

did you find a fix ? I create a flash drive with UniBeast . Clean install, they open clover 2.3k 3330 followed the guide for settings and add the kexts to folders 10.11 and other . It goes to sleep and when it wake up it reboot.
I try post installation with multibeast 801 sleep / wake is working but imessage is not working.

 

[mac_nibblet]

I'm also having problems waking up from sleep

Anonymous UUID:       D397C20D-26C1-24C7-470A-3422C585D448

Tue Dec 22 10:19:47 2015

*** Panic Report ***
panic(cpu 7 caller 0xffffff80003d155a): Kernel trap at 0xffffff800083c36d, type 13=general protection, registers:
CR0: 0x000000008001003b, CR2: 0xffffff837e1ce000, CR3: 0x0000000008cef000, CR4: 0x00000000000626e0
RAX: 0xffffff803e9d7d00, RBX: 0x0000000000000019, RCX: 0x0000000000010002, RDX: 0x0000000000000000
RSP: 0xffffff839e26bcb0, RBP: 0xffffff839e26bcf0, RSI: 0xffffff8000b270c0, RDI: 0xffffff803e9e7c80
R8:  0xffffff803e9e7480, R9:  0x0000000000000001, R10: 0x0000000000000000, R11: 0x0000000000000001
R12: 0xffffff803e9e7480, R13: 0xffffff803e9e7580, R14: 0x060000010010c1f8, R15: 0xffffff8000b270c0
RFL: 0x0000000000010202, RIP: 0xffffff800083c36d, CS:  0x0000000000000008, SS:  0x0000000000000000
Fault CR2: 0xffffff837e1ce000, Error code: 0x0000000000000000, Fault CPU: 0x7, PL: 0

Backtrace (CPU 7), Frame : Return Address
0xffffff839e26ddf0 : 0xffffff80002de792 
0xffffff839e26de70 : 0xffffff80003d155a 
0xffffff839e26e050 : 0xffffff80003ef233 
0xffffff839e26e070 : 0xffffff800083c36d 
0xffffff839e26bcf0 : 0xffffff7f828f5f37 
0xffffff839e26bd30 : 0xffffff7f828f5e18 
0xffffff839e26bd70 : 0xffffff7f828f6366 
0xffffff839e26bdf0 : 0xffffff7f828fa419 
0xffffff839e26be80 : 0xffffff80008930bd 
0xffffff839e26bec0 : 0xffffff8000892bc6 
0xffffff839e26bf30 : 0xffffff800088d87a 
0xffffff839e26bf70 : 0xffffff800089385c 
0xffffff839e26bfb0 : 0xffffff80003cbf77 
      Kernel Extensions in backtrace:
         org.netkas.driver.FakeSMC(1394.0)[2DBA2F88-A115-386A-85D0-F88021A4D2E3]@0xffffff7f828f4000->0xffffff7f8290cfff
            dependency: com.apple.iokit.IOACPIFamily(1.4)[CBAE26D8-0ACB-3C1F-8347-FDCA67EC40B3]@0xffffff7f81736000

BSD process name corresponding to current thread: kernel_task
Boot args: dart=0 kext-dev-mode=1 slide=0 

Mac OS version:
Not yet set

Kernel version:
Darwin Kernel Version 15.2.0: Fri Nov 13 19:56:56 PST 2015; root:xnu-3248.20.55~2/RELEASE_X86_64
Kernel UUID: 17EA3101-D2E4-31BF-BDA9-931F51049F93
__HIB  text base: 0xffffff8000100000
System model name: iMac13,2 (Mac-FC02E91DDD3FA6A4)

System uptime in nanoseconds: 2172923779
last loaded kext at 1033363114: com.apple.driver.AppleXsanScheme	3 (addr 0xffffff7f8207f000, size 40960)
loaded kexts:
org.hwsensors.driver.GPUSensors	1394
com.insanelymac.AtherosL1cEthernet	1.2.3
org.hwsensors.driver.LPCSensors	1394
com.insanelymac.driver.AppleIntelE1000e	3.2.4
org.hwsensors.driver.ACPISensors	1394
org.hwsensors.driver.CPUSensors	1394
org.netkas.driver.FakeSMC	1394
com.apple.iokit.IOAHCIBlockStorage	2.8.5
com.apple.driver.AppleFWOHCI	5.5.2
com.apple.driver.AppleAHCIPort	3.1.8
com.apple.driver.usb.AppleUSBEHCIPCI	1.0.1
com.apple.driver.AppleACPIButtons	4.0
com.apple.driver.AppleRTC	2.0
com.apple.driver.AppleHPET	1.8
com.apple.driver.AppleSMBIOS	2.1
com.apple.driver.AppleAPIC	1.7
com.apple.driver.AppleIntelCPUPowerManagementClient	218.0.0
com.apple.nke.applicationfirewall	163
com.apple.security.quarantine	3
com.apple.security.TMSafetyNet	8
com.apple.driver.AppleIntelCPUPowerManagementInfo	1
com.apple.driver.AppleIntelCPUPowerManagement	218.0.0
com.apple.driver.AppleXsanScheme	3
com.apple.driver.AppleUSBMergeNub	900.4.1
com.apple.iokit.IOFireWireFamily	4.5.8
com.apple.iokit.IOUSBFamily	900.4.1
com.apple.driver.AppleEFINVRAM	2.0
com.apple.iokit.IOAHCIFamily	2.8.1
com.apple.driver.usb.AppleUSBEHCI	1.0.1
com.apple.iokit.IONetworkingFamily	3.2
com.apple.driver.usb.AppleUSBXHCIPCI	1.0.1
com.apple.driver.usb.AppleUSBXHCI	1.0.1
com.apple.iokit.IOUSBHostFamily	1.0.1
com.apple.driver.AppleUSBHostMergeProperties	1.0.1
com.apple.iokit.IOHIDFamily	2.0.0
com.apple.driver.AppleEFIRuntime	2.0
com.apple.security.sandbox	300.0
com.apple.kext.AppleMatch	1.0.0d1
com.apple.driver.AppleKeyStore	2
com.apple.driver.AppleMobileFileIntegrity	1.0.5
com.apple.driver.AppleCredentialManager	1.0
com.apple.driver.DiskImages	417.1
com.apple.iokit.IOStorageFamily	2.1
com.apple.iokit.IOReportFamily	31
com.apple.driver.AppleFDEKeyStore	28.30
com.apple.driver.AppleACPIPlatform	4.0
com.apple.iokit.IOPCIFamily	2.9
com.apple.iokit.IOACPIFamily	1.4
com.apple.kec.Libm	1
com.apple.kec.pthread	1
com.apple.kec.corecrypto	1.0
Model: iMac13,2, BootROM IM131.010A.B05, 4 processors, Intel Core i7, 3,50 GHz, 32 GB, SMC 2.11f14
Graphics: NVIDIA GeForce GTX 670, NVIDIA GeForce GTX 670, PCIe, 2048 MB
Memory Module: BANK0/DIMM0, 8 GB, DDR3, 1333 MHz, Corsair, CMZ32GX3M4X1600C10
Memory Module: BANK1/DIMM0, 8 GB, DDR3, 1333 MHz, Corsair, CMZ32GX3M4X1600C10
Memory Module: BANK0/DIMM1, 8 GB, DDR3, 1333 MHz, Corsair, CMZ32GX3M4X1600C10
Memory Module: BANK1/DIMM1, 8 GB, DDR3, 1333 MHz, Corsair, CMZ32GX3M4X1600C10
Network Service: Ethernet 2, Ethernet, en1
Serial ATA Device: ST480HM000-1G5162, 480,1 GB
USB Device: USB 2.0 Bus
USB Device: Hub
USB Device: Xonar U7
USB Device: USB 2.0 Bus
USB Device: Hub
USB Device: USB2.0 Hub
USB Device: USB2.0 Hub
USB Device: HD Pro Webcam C920
USB Device: USB 3.0 Bus
USB Device: 4-Port USB 3.0 Hub
USB Device: 4-Port USB 3.0 Hub
USB Device: Keyboard Hub
USB Device: Gaming Mouse G400
USB Device: Apple Keyboard
Thunderbolt Bus:

 

[michebre]

Thanks very much for your guide on the z77x ud5h board. Everything went very smoothly as per your guide.


I was curious if you were able to completely disable SIP as I have tried everything.


When booted into the Recovery HD and invoked CSRUTIL status, it states SIP is DISABLED completely but when I try and install Xtrafinder, I still get the the SIP warning message.


I have tried reconfiguring the config.plist trying 0x67 value both in the Clover Configurator and manually in the config.plist. I still get the SIP window.


Is it possible to completely disable SIP? I have Googled everything available on the subject and tried everything I can think of?


Any advice, or suggestion regarding this would be greatly appreciated.


I apologize if this is the wrong place to inquire about this.


Since I have your same board I thought it appropriate to ask you here.


Thanks,
michebre

 

[smithsr93]

n3onlit3,

First of all thank you very much for this guide, as I have the same motherboard. I have a question, I followed the guide and used your .mb file since I had installed Multibeast 8.01, however the machine does power down all the way from shutdown on El Capitan. Any suggestions on how to resolve?

ISSUE RESOLVED: It turns out the Main BIOS was in the the process of failing and finally failed. The Main BIOS stuck on the initial Splash Screen and could not select to either enter the Main BIOS or select the Boot Device.

Upon switching to the Backup BIOS and implementing the BIOS selections as described in the guide, there were no issues with shutdown nor with Multibeast provided by n3onlit3. I have update to an EVGA 750TI and no issue on shutdown. Have not tested all configurations potential issues but shall see what happens.

 

[solhu]

Hello,

Followed your guide and used the .MB file on multi beast for the POST INSTALL. I did not get audio, so I followed the post install guide. Now I still do not have audio, and my resolution is stuck at 720p. What should I do? It boots tho...

i7-3770k
HD4000 On board Graphics
z77-U3DH
16g Ram
120gb SSD

 

[jnkstuff]

You do realize the mb file was for a Z77X-UD5h right?

Hello,

Followed your guide and used the .MB file on multi beast for the POST INSTALL. I did not get audio, so I followed the post install guide. Now I still do not have audio, and my resolution is stuck at 720p. What should I do? It boots tho...

i7-3770k
HD4000 On board Graphics
z77-U3DH
16g Ram
120gb SSD