Contribute
Register

[Guide] CustoMac 2013 | Z77X-UD5H | i7-3770K | GT 640 x2 | OS X 10.11

Status
Not open for further replies.
Joined
Mar 16, 2013
Messages
21
Motherboard
GA-Z77X-UD5H
CPU
i7-3770
Graphics
NVIDIA GTX-660
Mac
  1. Mac Pro
Classic Mac
Mobile Phone
Gotta say thank you for this guide. I had a working Z77x-UD5H Capitan build based of another guide. But out of the blue my sleep stopped working. Decided I would just do a full reinstall. Followed your guide and the way through install and then did Unibeast with your .mb file. Only thing I changed was removing the sound driver. I tried it and it kinda worked but I started getting the distortion and sleep issues. I went back to my trusted standby...external USB sound. No hassle with the USB sound and just works. Your guide was by far the easiest I have used. Thank you again!
 
Joined
Apr 14, 2013
Messages
1
Motherboard
GA-Z77X-UD5H
CPU
i5-3570K
Graphics
NVIDIA GTX-660 Ti
Mac
  1. Mac Pro
Classic Mac
Mobile Phone
  1. iOS
Hi I followed the guide, and quite succesfully installed El Capitan on my computer.
But Now I am faceing some boot problems.
I don't really get how to set up with clover in order to have only Windows Seven and El Capitan on boot page.
I also figured out that even when I choose the Windows partition from Clover; the sytem doesn't launch.
I have to go in BIOS and choose to start on Windows from there.
Can you please let me know which elements I have to edit here in order to have one of you guys helping me with this issues.

As you might have guessed I am not an advanced user.

Thanks
 
Joined
Feb 10, 2012
Messages
7
Motherboard
GA-Z270-D3H
CPU
i7 7700K
Graphics
RX 580
Mac
  1. MacBook Pro
Mobile Phone
  1. iOS
I add my thanks to this Guide, it was the easiest install I have done .. that is once I remembered I had to take my GTS 250 Card out prior to installing, and then putting back after the install was completed.

Migration done, I have a working mac .. have not tested sleep and wake yet - I will later

[update] - sleep causes the PC to restart. think I saw a similar issue a few pages earlier I need to read.

thanks again
 
Joined
Jul 19, 2013
Messages
50
Motherboard
Gigabyte GA-Z77X-UD5H
CPU
i7-3770K
Graphics
RX 5500 XT
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. Android
n3oNLit3 - this was an amazing guide - thank you for going through such detail!! And attaching all of the files too was awesome, very considerate of you.

I have an almost identical hardware setup to you, probably the only difference is I have the GeForce GTX 670 FTW card.

I'm stuck - I had a working El Capitan/Clover build, but an attempt at applying an audio script has me at a point where I can only get in via Safe Mode. Is it safe to take your folders and replace the ones I had in my Clover directory if we had the same hardware, but looking out for things like Volume references before applying? Thinking I'd do that on one of my Clover USBs as a test drive, then if it works as expected move it to my EFI drive's Clover folder.

Thoughts?

I've gone through so many iterations of my config.plist file that I'm not sure where to take it next - my thread with the config.plist, iojones, etc can be found here:
June 2013 CustoMac Pro from Mountain Lion to El Capitan in one update!

If you can check it out, I'd be grateful.. But if not, I understand. Either way I wanted to thank you for the awesome walkthrough.
 
Joined
Jul 19, 2013
Messages
50
Motherboard
Gigabyte GA-Z77X-UD5H
CPU
i7-3770K
Graphics
RX 5500 XT
Mac
  1. iMac
  2. MacBook Pro
Mobile Phone
  1. Android
n3oNLit3 - this was an amazing guide - thank you for going through such detail!! And attaching all of the files too was awesome, very considerate of you.

I have an almost identical hardware setup to you, probably the only difference is I have the GeForce GTX 670 FTW card.

I'm stuck - I had a working El Capitan/Clover build, but an attempt at applying an audio script has me at a point where I can only get in via Safe Mode. Is it safe to take your folders and replace the ones I had in my Clover directory if we had the same hardware, but looking out for things like Volume references before applying? Thinking I'd do that on one of my Clover USBs as a test drive, then if it works as expected move it to my EFI drive's Clover folder.

Thoughts?

I've gone through so many iterations of my config.plist file that I'm not sure where to take it next - my thread with the config.plist, iojones, etc can be found here:
June 2013 CustoMac Pro from Mountain Lion to El Capitan in one update!

If you can check it out, I'd be grateful.. But if not, I understand. Either way I wanted to thank you for the awesome walkthrough.

I tried this, but still only able to get into Safe Mode. Here was the boot log:

0:100 0:100 MemLog inited, TSC freq: 3503444226
0:100 0:000 LegacyRegion2: Chipset/proc: 0x01508086
0:100 0:000 Next Generation Core processors (PAM 0x80-0x86)
0:100 0:000 Test PAM1=(0x41=90, 0x5a=00, 0x81=11, 0x91=00) at chipset 01508086
0:100 0:000 , Install = Success
0:114 0:014 BiosVideoDriverBindingStart!
0:114 0:000 BiosVideoCheckForVbe
0:114 0:000 EdidOverride not found
0:186 0:072 Edid1-
0:211 0:024 Edid0+
0:211 0:000 found Detail Timing 1920x1080
0:259 0:048 0 640x480 attr=3BF - ok, edid+, 640x480, working, highest, pref=0
0:261 0:001 1 800x600 attr=3BF - ok, edid+, 800x600, working, highest, pref=1
0:263 0:001 2 1024x768 attr=3BF - ok, edid+, 1024x768, working, highest, pref=2
0:265 0:001 3 1280x1024 attr=3BF - ok, edid+, working, highest, pref=3
0:275 0:010 4 1920x1080 attr=3BF - ok, edid+, working, highest, pref=4
0:277 0:001 5 1280x800 attr=3BF - ok, edid+, working
0:277 0:000 BV new mode: 4 1920x1080
0:620 0:343 SetMode pref 4 (4) = Success
7:285 6:664
7:285 0:000 Now is 6.1.2016, 14:28:21 (GMT+2047)
7:285 0:000 Starting Clover rev 3263 on CLOVER EFI
7:285 0:000 SelfDevicePath=PcieRoot(0x0)\Pci(0x1A,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(1,MBR,0x00000000,0x2,0x3D1FFE) @DD49A518
7:285 0:000 SelfDirPath = \EFI\CLOVER
7:285 0:000 Total Memory Slots Count = 4
7:285 0:000 Type 17 Index = 0
7:285 0:000 SmbiosTable.Type17->Speed = 1333MHz
7:285 0:000 SmbiosTable.Type17->Size = 8192MB
7:285 0:000 SmbiosTable.Type17->Bank/Device = BANK 0 ChannelA-DIMM0
7:285 0:000 Type 17 Index = 1
7:285 0:000 SmbiosTable.Type17->Speed = 1333MHz
7:285 0:000 SmbiosTable.Type17->Size = 8192MB
7:285 0:000 SmbiosTable.Type17->Bank/Device = BANK 1 ChannelA-DIMM1
7:285 0:000 Type 17 Index = 2
7:285 0:000 SmbiosTable.Type17->Speed = 1333MHz
7:285 0:000 SmbiosTable.Type17->Size = 8192MB
7:285 0:000 SmbiosTable.Type17->Bank/Device = BANK 2 ChannelB-DIMM0
7:285 0:000 Type 17 Index = 3
7:285 0:000 SmbiosTable.Type17->Speed = 1333MHz
7:285 0:000 SmbiosTable.Type17->Size = 8192MB
7:285 0:000 SmbiosTable.Type17->Bank/Device = BANK 3 ChannelB-DIMM1
7:285 0:000 Boot status=0
7:285 0:000 Clover revision: 3263 running on To be filled by O.E.M.
7:285 0:000 ... with board Z77X-UD5H
7:285 0:000 CPU Vendor = 756E6547 Model=306A9
7:285 0:000 The CPU supported turbo
7:285 0:000 BrandString = Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz
7:285 0:000 MSR 0xE2 before patch 1E000403
7:285 0:000 MSR 0xE4 00010414
7:285 0:000 MSR 0xCE 00081010_F0012300
7:285 0:000 non-usable FLEX_RATIO = F0000
7:285 0:000 corrected FLEX_RATIO = E0000
7:285 0:000 MSR 0x1B0 00000000
7:285 0:000 FSBFrequency=105MHz DMIvalue=100000kHz
7:285 0:000 Corrected FSBFrequency=100MHz
7:285 0:000 Vendor/Model/Stepping: 0x756E6547/0x3A/0x9
7:285 0:000 Family/ExtFamily: 0x6/0x0
7:285 0:000 MaxDiv/MinDiv: 35.0/16
7:285 0:000 Turbo: 37/38/39/39
7:285 0:000 Features: 0xBFEBFBFF
7:285 0:000 Threads: 8
7:285 0:000 Cores: 4
7:285 0:000 FSB: 100 MHz
7:285 0:000 CPU: 3700 MHz
7:285 0:000 TSC: 3700 MHz
7:285 0:000 PIS: 400 MHz
7:285 0:000 PCI (00|00:00.00) : 8086 0150 class=060000
7:285 0:000 PCI (00|00:01.00) : 8086 0151 class=060400
7:285 0:000 PCI (00|01:00.00) : 10DE 1189 class=030000
7:285 0:000 Found NVidia model=EVGA GeForce GTX 670
7:285 0:000 PCI (00|01:00.01) : 10DE 0E0A class=040300
7:285 0:000 PCI (00|00:14.00) : 8086 1E31 class=0C0330
7:285 0:000 PCI (00|00:16.00) : 8086 1E3A class=078000
7:285 0:000 PCI (00|00:19.00) : 8086 1503 class=020000
7:285 0:000 LAN 0, Vendor=8086, MMIO=F7600000
7:285 0:000 PCI (00|00:1A.00) : 8086 1E2D class=0C0320
7:285 0:000 PCI (00|00:1B.00) : 8086 1E20 class=040300
7:285 0:000 PCI (00|00:1C.00) : 8086 1E10 class=060400
7:285 0:000 PCI (00|00:1C.01) : 8086 1E12 class=060400
7:285 0:000 PCI (00|03:00.00) : 1B4B 9172 class=010601
7:285 0:000 PCI (00|00:1C.04) : 8086 1E18 class=060400
7:285 0:000 PCI (00|04:00.00) : 168C 0030 class=028000
7:285 0:000 PCI (00|00:1C.05) : 8086 244E class=060401
7:285 0:000 PCI (00|05:00.00) : 8086 244E class=060401
7:285 0:000 PCI (00|06:01.00) : 1106 3044 class=0C0010
7:285 0:000 PCI (00|00:1C.06) : 8086 1E1C class=060400
7:285 0:000 PCI (00|07:00.00) : 1969 1091 class=020000
7:285 0:000 LAN 1, Vendor=1969, MMIO=F7200000
7:285 0:000 PCI (00|00:1C.07) : 8086 1E1E class=060400
7:285 0:000 PCI (00|08:00.00) : 1B4B 9172 class=010601
7:285 0:000 PCI (00|00:1D.00) : 8086 1E26 class=0C0320
7:285 0:000 PCI (00|00:1F.00) : 8086 1E44 class=060100
7:285 0:000 PCI (00|00:1F.02) : 8086 1E02 class=010601
7:285 0:000 PCI (00|00:1F.03) : 8086 1E22 class=0C0500
7:285 0:000 Clover load options size = 0 bytes
7:354 0:069 Using OEM config.plist at path: EFI\CLOVER\config.plist
7:355 0:000 EFI\CLOVER\config.plist loaded: Success
7:378 0:022 Found theme directory: bluemac
7:412 0:034 Found theme directory: christmas
7:447 0:034 Found theme directory: embedded
7:481 0:034 Found theme directory: newyear
7:516 0:034 Found theme directory: random
7:550 0:034 Found theme directory: Space
7:585 0:034 Found theme directory: yosemitelogin
7:619 0:034 Loading early settings
7:619 0:000 timeout set to 2
7:619 0:000 Custom boot CUSTOM_BOOT_DISABLED (0x0)
7:619 0:000 KextsToPatch: 4 requested
7:619 0:000 KextToPatch 0: AppleHDA (t1-10.9-10.11-AppleHDA/Realtek ALC898) Kext bin patch, data len: 4
7:619 0:000 KextToPatch 1: AppleHDA (t1-10.11-AppleHDA/Realtek ALC...) Kext bin patch, data len: 4
7:619 0:000 KextToPatch 2: AppleAHCIPort (External icons patch) Kext bin patch, data len: 8
7:619 0:000 KextToPatch 3: AppleHDA (t1-AppleHDA/Resources/xml>zml) Kext bin patch, data len: 6
7:619 0:000 Default theme: yosemitelogin
7:619 0:000 Hiding entries with string \EFI\BOOT\BOOTX64.EFI
7:619 0:000 Hiding entries with string Windows
7:619 0:000 LoadDrivers() start
7:619 0:000 LoadDrivers() end
7:619 0:000 SetScreenResolution: 1920x1080 - already set
7:619 0:000 Console modes reported: 4, available modes:
7:619 0:000 Mode 1: 80x25
7:619 0:000 Mode 2: 80x50
7:619 0:000 Mode 3: 100x31
7:619 0:000 Mode 4: 240x56 (current mode)
7:619 0:000 SetScreenResolution: 1920x1080 - already set
7:619 0:000 reinit: self device path=PcieRoot(0x0)\Pci(0x1A,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(1,MBR,0x00000000,0x2,0x3D1FFE)
7:620 0:000 ScanSPD() start
7:620 0:000 SMBus CmdReg: 0x3
7:620 0:000 Scanning SMBus [8086:1E22], mmio: 0xF7635004, ioport: 0xF000, hostc: 0x1
7:620 0:000 Slots to scan [8]...
7:635 0:014 SPD[0]: Type 11 @0x50
7:644 0:008 Found module with XMP version 1.3DDR speed 1333MHz
7:644 0:000 Slot: 0 Type 24 8192MB 1333MHz Vendor=Corsair PartNo=CMZ32GX3M4X1600C10 SerialNo=0000000000000000
7:658 0:014 SPD[1]: Type 11 @0x51
7:667 0:008 Found module with XMP version 1.3DDR speed 1333MHz
7:667 0:000 Slot: 1 Type 24 8192MB 1333MHz Vendor=Corsair PartNo=CMZ32GX3M4X1600C10 SerialNo=0000000000000000
7:681 0:014 SPD[2]: Type 11 @0x52
7:690 0:008 Found module with XMP version 1.3DDR speed 1333MHz
7:690 0:000 Slot: 2 Type 24 8192MB 1333MHz Vendor=Corsair PartNo=CMZ32GX3M4X1600C10 SerialNo=0000000000000000
7:704 0:014 SPD[3]: Type 11 @0x53
7:713 0:008 Found module with XMP version 1.3DDR speed 1333MHz
7:713 0:000 Slot: 3 Type 24 8192MB 1333MHz Vendor=Corsair PartNo=CMZ32GX3M4X1600C10 SerialNo=0000000000000000
7:738 0:025 ScanSPD() end
7:748 0:009 Get Acpi Tables List from RSDT:
7:748 0:000 Found table: FACP A M I len=132
7:748 0:000 Found table: APIC A M I len=146
7:748 0:000 Found table: MCFG len=60
7:748 0:000 Found table: HPET A M I len=56
7:748 0:000 Found table: SSDT SataTabl len=877
7:748 0:000 Found table: SSDT Cpu0Ist len=2474
7:748 0:000 Found table: SSDT CpuPm len=2706
7:748 0:000 Found table: MATS A M I len=52
7:748 0:000 Calibrated TSC frequency =3503444226 =3503MHz
7:748 0:000 Loading main settings
7:748 0:000 Dropping 2 tables
7:748 0:000 Drop table 0 signature="SSDT" (54445353) table-id="Cpu0Ist" (0074734930757043)
7:748 0:000 set table: 54445353, 74734930757043 to drop: true
7:748 0:000
7:748 0:000 Drop table 1 signature="SSDT" (54445353) table-id="CpuPm" (0000006D50757043)
7:748 0:000 set table: 54445353, 6D50757043 to drop: true
7:748 0:000
7:748 0:000 Config set ChassisType=0xD
7:748 0:000 Config set QPI = 0 disable table132
7:748 0:000 Config set CpuFreq=3503MHz
7:748 0:000 Config set CpuType=704
7:748 0:000 Config set BusSpeed=100098kHz
7:748 0:000 found 7 volumes with blockIO
7:748 0:000 0. Volume:
7:748 0:000 PcieRoot(0x0)\Pci(0x1A,0x0)\USB(0x0,0x0)\USB(0x1,0x0)
7:760 0:011 USB volume
7:760 0:000 USB volume
7:760 0:000 1. Volume:
7:760 0:000 PcieRoot(0x0)\Pci(0x1A,0x0)\USB(0x0,0x0)\USB(0x1,0x0)\HD(1,MBR,0x00000000,0x2,0x3D1FFE)
7:771 0:011 USB volume
7:771 0:000 USB volume
7:771 0:000 This is SelfVolume !!
7:771 0:000 2. Volume:
7:771 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)
7:773 0:002 Result of bootcode detection: bootable unknown (legacy)
7:773 0:000 3. Volume:
7:773 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x2,0x0,0x0)
7:773 0:000 found optical drive
7:773 0:000 4. Volume:
7:773 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(1,GPT,B05FC7EE-6093-4E99-9FA7-F6EC4DCAAB1E,0x28,0x64000)
7:773 0:000 Result of bootcode detection: bootable unknown (legacy)
7:775 0:001 5. Volume:
7:775 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(2,GPT,2EBECD8C-23A1-4F87-9618-021B90F09F48,0x7978800,0x33F32B68)
7:775 0:000 Result of bootcode detection: bootable unknown (legacy)
7:775 0:000 6. Volume:
7:775 0:000 PcieRoot(0x0)\Pci(0x1F,0x2)\Sata(0x1,0x0,0x0)\HD(3,GPT,2C1D2739-1464-48AB-970C-02E68F92D3A1,0x3B8AB368,0x135F20)
7:776 0:001 PutNvramPlistToRtVars: nvram.plist not found
7:811 0:034 Using theme 'newyear' (EFI\CLOVER\themes\newyear)
7:811 0:000 OS main and drive as badge
7:872 0:061 Choosing theme newyear
7:872 0:000 Custom entries start
7:872 0:000 Custom entries finish
7:872 0:000 Scanning loaders...
7:872 0:000 0: 'Whole Disc Boot' no file system
7:872 0:000 1: 'Clover'
9:261 1:389 2: 'Whole Disc Boot' no file system
9:261 0:000 3: 'Whole Disc Boot' no file system
9:261 0:000 4: 'EFI'
9:265 0:003 AddLoaderEntry for Volume Name=EFI
9:416 0:151 Icon 18 (icons\vol_internal_ntfs.icns) not found
9:416 0:000 Theme path EFI\CLOVER\themes\newyear, ThemeDir=DC069120
10:889 1:472 5: 'Mountain'
10:892 0:003 AddLoaderEntry for Volume Name=Mountain
10:893 0:001 Check if volume Is Hibernated:
10:893 0:000 Check sleep image 'by signature':
10:895 0:001 read prefs \Library\Preferences\SystemConfiguration\com.apple.PowerManagement.plist status=Success
10:895 0:000 SleepImage name from pref: ImageVolume = 'Mountain', ImageName = '\private\var\vm\sleepimage'
10:896 0:001 sleepimage not found -> Not Found
10:896 0:000 hibernated: no - sign
12:527 1:630 6: 'Recovery HD'
12:527 0:000 AddLoaderEntry for Volume Name=Recovery HD
14:090 1:563 Custom legacy start
14:090 0:000 Custom legacy end
14:090 0:000 Custom tool start
14:090 0:000 Custom tool end
14:194 0:103 found tool \EFI\CLOVER\tools\Shell64U.efi
14:194 0:000 Checking EFI partition Volume 4 for Clover
14:609 0:414 GetEfiBootDeviceFromNvram: efi-boot-device-data not found
14:609 0:000 EfiBootVolume not found
14:609 0:000 Default boot entry not found
14:609 0:000 DefaultIndex=-1 and MainMenu.EntryCount=8
14:609 0:000 Use anime=elka_1 frames=27
21:260 6:651 Found Mouse device:
21:330 0:069 GUI ready
25:935 4:605 BootOption of the entry is empty
25:935 0:000 StartLoader() start
25:935 0:000 Finally: Bus=100098kHz CPU=3503MHz
25:935 0:000 Kernel and Kext Patches at DD6AE1D0:
25:935 0:000 Allowed: y
25:935 0:000 Debug: n
25:935 0:000 KernelCpu: n
25:935 0:000 Lapic: n
25:935 0:000 Haswell-E: n
25:935 0:000 AICPUPM: y
25:935 0:000 AppleRTC: y
25:935 0:000 KernelPm: y
25:935 0:000 FakeCPUID: 0x0
25:935 0:000 ATIController: null
25:935 0:000 ATIDataLength: 0
25:935 0:000 0 Kexts to load
25:935 0:000 4 Kexts to patch
25:935 0:000 KextPatch[0]: 4 bytes, AppleHDA
25:935 0:000 KextPatch[1]: 4 bytes, AppleHDA
25:935 0:000 KextPatch[2]: 8 bytes, AppleAHCIPort
25:935 0:000 KextPatch[3]: 6 bytes, AppleHDA
25:935 0:000 Loading boot.efi status=Success
26:042 0:106 GetOSVersion: : 10.11.2
26:042 0:000 insert table 9 for dev 0:0
26:042 0:000 insert table 9 for dev 0:0
26:042 0:000 insert table 9 for dev 0:0
26:042 0:000 insert table 9 for dev 1:0
26:043 0:000 Channels: 2
26:043 0:000 Interleave: 0 2 1 3 4 6 5 7
26:043 0:000 SMBIOS Type 17 Index = 0 => 0 0:
26:043 0:000 BANK0 DIMM0 1333MHz 8192MB
26:043 0:000 mTotalSystemMemory = 8192
26:043 0:000 SMBIOS Type 17 Index = 1 => 2 2:
26:043 0:000 BANK1 DIMM0 1333MHz 8192MB
26:043 0:000 mTotalSystemMemory = 16384
26:043 0:000 SMBIOS Type 17 Index = 2 => 1 1:
26:043 0:000 BANK0 DIMM1 1333MHz 8192MB
26:043 0:000 mTotalSystemMemory = 24576
26:043 0:000 SMBIOS Type 17 Index = 3 => 3 3:
26:043 0:000 BANK1 DIMM1 1333MHz 8192MB
26:043 0:000 mTotalSystemMemory = 32768
26:043 0:000 NumberOfMemoryDevices = 4
26:043 0:000 Type20[0]->End = 0x7FFFFF, Type17[0] = 0x2000
26:043 0:000 Type20[1]->End = 0x17FFFFF, Type17[2] = 0x8000
26:043 0:000 Type20[2]->End = 0xFFFFFF, Type17[1] = 0xC000
26:043 0:000 Type20[3]->End = 0x1FFFFFF, Type17[3] = 0x14000
26:043 0:000 Table 131 is present, CPUType=31
26:043 0:000 Change to: 704
26:043 0:000 RSDT 0xDE171028
26:043 0:000 FADT from RSDT: 0xDE1710E8
26:043 0:000 XSDT 0xDE171070
26:043 0:000 FADT from XSDT: 0xDE17C5F0
26:043 0:000 Xsdt reallocation done
26:043 0:000 old FADT length=F4
26:043 0:000 Found OperationRegion(GNVS, SystemMemory, DE22FE18, ...)
26:043 0:000 Found OperationRegion(MCHT, SystemMemory, FED10000, ...)
26:043 0:000 Found OperationRegion(RCRB, SystemMemory, FED1C000, ...)
26:043 0:000 Found OperationRegion(CPSB, SystemMemory, DE105F98, ...)
26:043 0:000 Found OperationRegion(IGDM, SystemMemory, 0, ...)
26:043 0:000 Found OperationRegion(TMMB, SystemMemory, FED40000, ...)
26:043 0:000 Found OperationRegion(TVID, SystemMemory, FED40F00, ...)
26:043 0:000 Found OperationRegion(TPMR, SystemMemory, FED40000, ...)
26:043 0:000 Apply DsdtFixMask=0x00000000 old way
26:043 0:000 drop _DSM mask=0x0000
26:043 0:000 ========= Auto patch DSDT Starting ========
26:043 0:000 VideoCard devID=0x118910DE
26:043 0:000 DisplayADR1[0] = 0x10000, DisplayADR2[0] = 0x0
26:043 0:000 USBADR[0] = 0x140000 and PCIe = 0xFFFE
26:043 0:000 USBADR[1] = 0x1A0000 and PCIe = 0xFFFE
26:055 0:011 Audio HDA (addr:0x1B0000) setting specified layout-id=1 (0x1)
26:055 0:000 Found Airport Atheros at 0x1C0004, 0x0, DeviceID=0x0030
26:055 0:000 USBADR[2] = 0x1D0000 and PCIe = 0xFFFE
26:055 0:000 first CPU found at 8A14 offset 8A17
26:055 0:000 score candidate at 8A10
26:055 0:000 score inserted in acpi_cpu_score _PR_
26:055 0:000 Found ACPI CPU: CPU0 And CPU1 And CPU2 And CPU3 And CPU4 And CPU5 And CPU6 And CPU7
within the score: _PR_
26:055 0:000 Found PCIROOTUID = 0
26:055 0:000 ========= Auto patch DSDT Finished ========
26:055 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=CpuPm Length=2706
26:055 0:000 Xsdt has tables count=8
26:055 0:000 Table: SSDT CpuPm 2706 dropped
26:055 0:000 corrected XSDT length=92
26:055 0:000 Drop tables from Xsdt, SIGN=SSDT TableID=Cpu0Ist Length=2474
26:055 0:000 Xsdt has tables count=7
26:055 0:000 Table: SSDT Cpu0Ist 2474 dropped
26:055 0:000 corrected XSDT length=84
26:055 0:000 Patch table: SSDT SataTabl
26:055 0:000 SSDT len = 0x36D
26:055 0:000 Drop tables from Xsdt, SIGN=XXXX TableID= Length=0
26:055 0:000 Xsdt has tables count=6
26:055 0:000 corrected XSDT length=84
26:055 0:000 CPUBase=0 and ApicCPUBase=1 ApicCPUNum=8
26:055 0:000 EdidDiscovered size=128
26:055 0:000 00 | 00 FF FF FF FF FF FF 00 04 69 FD 22 03 01 01 01
26:055 0:000 16 | 13 17 01 03 80 30 1B 78 2A 2A C5 A4 56 4F 9E 28
26:055 0:000 32 | 0F 50 54 B7 EF 00 D1 C0 81 40 81 80 95 00 B3 00
26:055 0:000 48 | 71 4F 81 C0 81 00 02 3A 80 18 71 38 2D 40 58 2C
26:055 0:000 64 | 45 00 DC 0C 11 00 00 1E 00 00 00 FF 00 44 35 4C
26:055 0:000 80 | 4D 51 53 30 34 33 39 35 33 0A 00 00 00 FD 00 32
26:055 0:000 96 | 4B 18 53 11 00 0A 20 20 20 20 20 20 00 00 00 FC
26:055 0:000 112 | 00 41 53 55 53 20 56 53 32 32 38 0A 20 20 00 FD
26:056 0:000 NVidia GFX injection not set
26:056 0:000 LAN Controller [8086:1503] :: PcieRoot(0x0)\Pci(0x19,0x0)
26:056 0:000 HDA Controller [8086:1E20] :: PcieRoot(0x0)\Pci(0x1B,0x0) => setting specified layout-id=1 (0x1)
26:056 0:000 LAN Controller [1969:1091] :: PcieRoot(0x0)\Pci(0x1C,0x6)\Pci(0x0,0x0)
26:056 0:000 stringlength = 748
26:056 0:000 CurrentMode: Width=1920 Height=1080
26:056 0:000 FSInjection: not started - gFSInjectProtocolGuid not found
26:057 0:000 Preparing kexts injection for arch=x86_64 from EFI\CLOVER\kexts\Other
26:057 0:000 Extra kext: EFI\CLOVER\kexts\Other\ACPISensors.kext
26:494 0:436 Extra kext: EFI\CLOVER\kexts\Other\AppleIntelE1000e.kext
27:836 1:342 Extra kext: EFI\CLOVER\kexts\Other\AtherosL1cEthernet.kext
28:571 0:734 Extra kext: EFI\CLOVER\kexts\Other\CPUSensors.kext
28:892 0:321 Extra kext: EFI\CLOVER\kexts\Other\FakeSMC.kext
29:501 0:608 Extra kext: EFI\CLOVER\kexts\Other\GPUSensors.kext
30:178 0:677 Extra kext: EFI\CLOVER\kexts\Other\LPCSensors.kext
31:020 0:841 Extra kext: EFI\CLOVER\kexts\Other\realtekALC.kext
31:161 0:141 Custom boot screen not used because entry has unset use graphics
31:161 0:000 Closing log
 
Joined
Nov 25, 2011
Messages
32
Motherboard
Gigabyte GA-Z77X-UD5H LGA 1155 Z77 ATX Motherboard
CPU
Intel Core i7 3770K 3.5GHz LGA 1155 Processor
Graphics
EVGA NVIDIA GeForce GTX 980 SC
Mac
  1. iMac
  2. MacBook
  3. MacBook Pro
  4. Mac Pro
Classic Mac
  1. Classic
  2. iMac
  3. Performa
  4. Power Mac
Mobile Phone
  1. iOS
I have the same motherboard( GA-Z77X-UD5H) except I use a GTX 980 Graphics card and I've overclocked the CPU to 4.3 Ghz-

The only way I was able to get el capitan to install was to remove the GTX980 and put in an GTX 660 - It worked natively and then let me install the Nvidia Web Drivers-

Getting Native power management to work with the 4.3Ghz overclock I had to create a custom SSDT and place it in the EFI->clover->ACPI->patched folder

http://www.tonymacx86.com/ssdt/86906-ssdt-generation-script-ivybridge-pm.html

I also use the iMac 13.2 SMBIOS

I have had problems with iMessage- It only sort of works.

Everything works - except certain USB ports. Only one out of four works on the top of my Graphite Series 600T Mid Towercase.

I have never used a DSDT with this motherboard. Haven't needed one with multibeast.

The problem with certain USB ports not working with clover on this motherboard seem like they can only be fixed using a DSDT.

If I boot into Yosemite using chameleon all the USB ports work again. . . so I know it's something with clover.

Since I have never needed a DSDT I am wondering if there are any DSDT's floating around for this specific motherboard-GA-Z77X-UD5H?

Creating your own seems a little too daunting for me right now. . .

I would like to try the fixes listed in this guide:
http://www.tonymacx86.com/el-capita...-10-11-usb-changes-solutions.html#post1108978

Also how hard is it to get this thing to dual boot into Windows 10 as well? I had it dual booting with yosemite, windows 10 and Chameleon

Thanks for the great guide!
 
Joined
Feb 5, 2013
Messages
1
Motherboard
gigabyte
CPU
i7
Graphics
onboard
Mac
Classic Mac
Mobile Phone
great guide, I used the multibeast 8 option however one of my NIC cards is not showing. Any idea what it might be?
 
Joined
Nov 12, 2011
Messages
11
Motherboard
10.11.3
CPU
i7 3770k
Graphics
GTX 670 OC
Mac
  1. iMac
  2. MacBook Air
  3. MacBook Pro
  4. Mac mini
Classic Mac
  1. PowerBook
Mobile Phone
  1. Android
Hi, thanks for the great directions. I have everything running snappy and smoothly except the reboot issue that people are having. It's rather random for me as if I walk away from computer, it would have already reboot when I come back to wake it. Other times it wakes normally and takes me directly to the desktop. I'm not sure where I should look as my research into this problem seems to be all mixed result from. Any help and direction where to research would be of great help. Thanks.
 
Joined
Sep 14, 2013
Messages
27
Motherboard
GA-Z77N - WIFI
CPU
3770k
Graphics
MSI GTX770OC
Mac
  1. MacBook Pro
Classic Mac
Mobile Phone
  1. iOS
There is not a big difference between the two. It is just about matching your hardware to the SMBIOS. The difference is really only GFX card. The MacMini was supplied with IGPU (HD4000) where the iMac came with GTX 675MX. You can look these up on EveryMac

That SSDT is not System Definition dependent, only processor dependent. So you could continue using MacMini 6,2 and try out the SSDT that way.
Another difference is that the MacMini does not have a dvd-rom, so in case you are using one..you should go with 13,2
I followed your guide and its pretty straight forward ..congrads!!
The only thing i am stuck is USB and bluetooth..
Back in 2013 when i 1st build my system, i chanced my wifi card with an atheros and had no problem in mavericks or yosemite.
In el capitan i tried everything..and ..no success.
I even patched my dsdt with the right patches that for a vanilla hackintosh by Mrengles (in GitHub), but still nothing...any ideas bro??
 
Joined
Nov 12, 2011
Messages
11
Motherboard
10.11.3
CPU
i7 3770k
Graphics
GTX 670 OC
Mac
  1. iMac
  2. MacBook Air
  3. MacBook Pro
  4. Mac mini
Classic Mac
  1. PowerBook
Mobile Phone
  1. Android
So I found something that may solve the reboot issue from wake.

http://www.tonymacx86.com/el-capita...r-update-10-11-2-z77x-ud5h-3.html#post1182787

I haven't tried it yet but will report back after I give it a test run.

Edit: Been testing it for the past several hours, letting it fall asleep and waking, seems to be working. I will report back tomorrow and see how OsxAptioFix2Drv-64.efi vs OsxAptioFixDrv-64.efi is holding up in the reboot problem.
 
Status
Not open for further replies.
Top