RehabMan
Moderator
- Joined
- May 2, 2012
- Messages
- 181,016
- Motherboard
- Intel DH67BL
- CPU
- i7-2600K
- Graphics
- HD 3000
- Mac
- Mobile Phone
Thanks.As for the USB settings I was referring too these below.All are set to Enabled.Bless
Code:XHCI Pre-Boot Driver xHCI Mode HS Port Switchable #1-4 xHCI Streams USB2.0 Controller Legacy USB Support XHCI Hand-Off EHCI Hand-Off
With xHCI mode = "enabled", the BIOS will likely disable the EHCI controllers, such that everything is on XHC.
Whether you want that or not is your decision.
EHCI+xHCI vs. xHCI only is covered in post #1.