- Joined
- May 13, 2015
- Messages
- 365
- Motherboard
- Acer Aspire 5750G + Clover Legacy
- CPU
- i3-2310M/HM65
- Graphics
- HD 3000 + GT 520M, 1366x768
- Mobile Phone
Are you seeing Clover?
no
Are you seeing Clover?
Then USB is not created correctly or BIOS settings are wrong, or you did not use your BIOS hotkey mechanism to get to the BIOS boot menu (not the same as BIOS setup).
Make sure:
- USB is created MBR with two partitions as described in post #1.
- Clover is installed to the FAT32 partition that is "CLOVER EFI"
- secure boot is disabled
- USB boot is enabled
- UEFI boot is enabled
- access the BIOS boot menu and choose specifically to boot the USB via UEFI
Also, some laptops have difficulty with certain USBs. Try different USB ports, different USB sticks for the case the laptop doesn't detect the USB stick from the boot menu. You can even use a powered USB hub... because sometimes it is an issue of the USB stick drawing too much power.
the first t options im sure they are ok.
and here are some pictures from the bios. i dont have any of those options in there...
...
No UEFI in your BIOS. Must use Clover legacy. Read post #1.
In post one is writen "-"CloverEFI" should be checked"
Wich one of the 3 options should i choose? :s
Here is the result...
View attachment 151353
Post EFI folder from USB.