[Guide] Booting the OS X installer on LAPTOPS with Clover

[RehabMan]

Hello friends I installed the Mojave macOS it happened everything right the installation, but when it concludes it does not show the option to start the boot .. I believe that it is some boot drive that is missing someone could help me

See guide:
https://www.tonymacx86.com/threads/guide-booting-the-os-x-installer-on-laptops-with-clover.148093/

Don't forget to fill out your profile as requested in the FAQ.

 

[Edd1024]

It does not apply to Mojave. APFS is forced on Mojave...

But does it make sense to go back to HFS+?

 

[Hidden.be]

Install problem....restart after some time....

 

[Rezaghaderi7575]

Hi guys I can't clean install Mojave on my laptop
Although I did not have a problem installing high sierra

Installer log

 

[RehabMan]

But does it make sense to go back to HFS+?

I'm sticking with APFS for now. Apple has had 2 years to insure its stability.

 

[RehabMan]

Install problem....restart after some time....

Open a separate thread.
Make sure you provide all files/data requested in FAQ, "Problem Reporting".
You forgot to press F2/F4.

And also do not forget to fill out your profile as requested in the FAQ.

 

[RehabMan]

Hi guys I can't clean install Mojave on my laptop
Although I did not have a problem installing high sierra

Installer log

Open a separate thread with all files requested as per FAQ, "Problem Reporting".

 

[ProtossBlaster]

good morning
Can i upgrade my Laptop Hp Elitbook8470p with macOS 10.13.6 to macOS 10.14 ? if yes there is a Manual to do that?
Many Thanks

 

[RehabMan]

good morning
Can i upgrade my Laptop Hp Elitbook8470p with macOS 10.13.6 to macOS 10.14 ? if yes there is a Manual to do that?
Many Thanks

See guide:
https://www.tonymacx86.com/threads/...book-zbook-using-clover-uefi-hotpatch.232948/

 

[razzvg]

Hi RehabMan. In addition to your guide (section: dualboot / efibootmgr) I would like to suggest another method for adding a Clover UEFI entry.

This will use the UEFI shell you can easily access from a Clover or f.ex Manjaro Linux USB. The reason for the suggestion is the problems you were referring to. As mentioned in the link below, some UEFI implementations have issues to modify the NVRAM. This method worked great for me to bypass installation failures like https://www.tonymacx86.com/threads/...-only-ran-for-0-seconds-with-dual-gpu.233092/ with few efforts by just running the installer on other hardware and adding my clover entry manually after.

An example can be found here (see 2.2.3):
https://wiki.archlinux.org/index.php/EFISTUB#UEFI_Shell