[Guide] Booting the OS X installer on LAPTOPS with Clover

[RehabMan]

[GUIDE] Booting the OS X installer on LAPTOPS with Clover UEFI

I Tryd
…check "Install for UEFI booting only", "Install Clover in the ESP" will automatically select
- check "Bluemac" from Themes (the config.plist files I provide use this theme)
- check "OsxAptioFixDrv-64" from Drivers64UEFI
- it can be downloaded from here…
- copy it to /EFI/Clover/drivers64UEFI
- INSTALLED THE OTHER KEXT

what do i miss?

Booting from the Hardrive doesn't work…
from the installer on the stick bringst that: efi boot loaded…
bootfile path System/Libary/CoreServices/boot.efi
Boot failed, sleeping for 10 seconds before exiting…

Post EFI folder from your HDD EFI partition.

 

[markbischoff]

[GUIDE] Booting the OS X installer on LAPTOPS with Clover UEFI

Im not that far, my idea was to first get a running USB Stick and then go further to the HD.

the efi folder on the stick is around 3 MB

 

[markbischoff]

[GUIDE] Booting the OS X installer on LAPTOPS with Clover UEFI

Stick efi folder without: CLOVERIA32.efi, CLOVERX64.efi, doc folder, tools folder

 

[RehabMan]

[GUIDE] Booting the OS X installer on LAPTOPS with Clover UEFI

Im not that far, my idea was to first get a running USB Stick and then go further to the HD.

the efi folder on the stick is around 3 MB

If you're testing with USB, why do you say "booting from HDD doesn't work"?

You have no kexts in Clover/kexts/10.10.

 

[markbischoff]

[GUIDE] Booting the OS X installer on LAPTOPS with Clover UEFI

Stick is a Unibeast Stick with 10.10

in the bios i select boot from usb
so i boot from the usb
then i can choose a volume to go further (boot 2) to do so i have to choose stick or the hd.

to install OS X i select the usb stick and start the install - runs perfekt installation works
restart again via stick selecting for boot 2 the hd - works
insolent the missing driver via multicast now everything is fine

But i want to run it via clover!!!
and the Problem is my clover Stick
That one does not work!!!

 

[RehabMan]

[GUIDE] Booting the OS X installer on LAPTOPS with Clover UEFI

Stick is a Unibeast Stick with 10.10

in the bios i select boot from usb
so i boot from the usb
then i can choose a volume to go further (boot 2) to do so i have to choose stick or the hd.

to install OS X i select the usb stick and start the install - runs perfekt installation works
restart again via stick selecting for boot 2 the hd - works
insolent the missing driver via multicast now everything is fine

But i want to run it via clover!!!
and the Problem is my clover Stick
That one does not work!!!

Re-create your USB stick using the 'createinstallmedia' method. Then there will be no doubt about legacy vs. UEFI boot.

And your profile/signature indicates nothing of laptop hardware details.

 

[markbischoff]

[GUIDE] Booting the OS X installer on LAPTOPS with Clover UEFI

Re-create your USB stick using the 'createinstallmedia' method. Then there will be no doubt about legacy vs. UEFI boot.

And your profile/signature indicates nothing of laptop hardware details.

Stupid question - i this tutorial there is no info about the Partition and GUID/MBR . Am i right Stick 1 Partition + GUID?
What name for the USB Partition?

To build the HP Stick the way is bit different (create the 2 partitions,…)

 

[RehabMan]

[GUIDE] Booting the OS X installer on LAPTOPS with Clover UEFI

Stupid question - i this tutorial there is no info about the Partition and GUID/MBR . Am i right Stick 1 Partition + GUID?
What name for the USB Partition?

To build the HP Stick the way is bit different (create the 2 partitions,…)

Read the guide carefully.

Quoting the guide:

...
Use Disk Utility to partition your USB. Partition format can be MBR or GPT but beware that some computers will not boot UEFI to a GPT USB.

 

[markbischoff]

[GUIDE] Booting the OS X installer on LAPTOPS with Clover UEFI

Sorry…

so i did with MBT - it did not start
i did with GUID - it does not even get black screen

I have no idea what im missing

read the guide 100 times…

i think the prolem must be on something inside the Clover Installer:
UEFI booting only
Install Clover in the ESP
Bluemac
OsxAptioFixDrv-64

but he does not boot from it

 

[markbischoff]

[GUIDE] Booting the OS X installer on LAPTOPS with Clover UEFI

Do You have any idea what to do?

Bios set to Both (UEFI/Leg) with and without CSM Support
Bios set to UEFI Only with and without CSM Support
Bios set to Legacy only with and without CSM Support

none of this is working

Please Help